Trying to update ATI drivers to Catalyst 10.5The very first step to uninstall the previous driver version does not work.
andrew@andrew-desktop:~$ cd /usr/share/ati/
andrew@andrew-desktop:/usr/share/ati$ sudo sh ./fglrx-uninstall.sh
[sudo] password for andrew:
[code]....
I have an ATI Radeon 4200 HD Mobility, with 256 MB of my RAM dedicated to it. I installed FGLRX, but the performance actually dropped compared to the open source drivers that come installed by default. I removed fglrx, and reinstalled the Radeon packages, but no avail.
Now, when I boot, I get the error, "unable to load module 'fglrx'," and my only option is to run Ubuntu in Safe Graphics Mode. This tells me that the computer is still trying to load FGLRX, and there's something that needs to be altered down at the boot level.
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
Section "Device"
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
I want to uninstall Open suse from my system.I am using dual boot with win 7.
View 3 Replies View RelatedI'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
I just installed Ubuntu 10.04 64-bit version and everything worked fine so far except for the fglrx driver as it seems. I wasn't able to enable desktop effects and couldn't start games like openarena or nexuiz.
Therefore, I installed the fglrx driver from ATI's site and got everything working fine. Unfortunately it introduced a problem with vlc and the window manager in general. If I go into fullscreen in vlc it takes at least 2 seconds until the screen reacts. Also, if I tab through windows there is at least a second delay which is all very very annoying. I removed the driver again and re-installed fglrx from the repos. I now have two entries for the Catalyst Control Center (normal + administrative) under System->Prefrences which is annoying but not the reason for this thread.
The main problem remains the delay with window tabbing (with desktop effects disabled) and vlc going into fullscreen (this also applies for ..... videos which also lag in fullscreen mode).
The card is a Radeon HD 4830, processor is an AMD Phenom II X4 810.
I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
View 9 Replies View RelatedI'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
n OpenGL not working with fglrx drivers?
View 1 Replies View RelatedMy new machine with a fresh install of Lucid boots up and displays the standard gdm login screen showing the list of users which looks fine. After you hover over a name or other option menus on the display, the pop-up or screen change is rendered poorly. It very slowly fixes itself over time. After I login everything works just fine even with the extra "desktop effects" I recently discovered that if I set the desktop effects to none, I get the same effect on my desktop. I've attached a screen capture to illustrate what I see but find hard to describe. The little horizontal bars will gradually be fixed over a minute or so. Dragging the window around smears that effect around the screen. I've been sniffing around the web off and on for a couple months now but haven't found anything that sounds similar.
Now for some hopefully helpful configuration data: This system is based on an Asus M4A89GTD PRO/USB3 motherboard with integrated ATI radeon video, and a 6 core processor. Lucid 32bit.
$ uname -a
Linux gandalf 2.6.32-26-generic-pae #48-Ubuntu SMP Wed Nov 24 10:31:20 UTC 2010 i686 GNU/Linux
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 4290
OpenGL version string: 3.3.10317 Compatibility Profile Context
[code]....
Every time the update-manager decides to upgrade the kernel my graphics driver is ****** up. I have had this problem in 10.04 and now in 10.10. Now I get dropped to the command prompt after an upgrade (I can also log in with fail-safe/low graphics mode). The problem is solved if I reinstall the package fglrx so nog big issue but it is rather annoying. What could be wrong? I am using ATI HD4770. I haven't tried open drivers yet.
View 7 Replies View RelatedI tried to install the 3D-accelerated proprietary graphics driver for my graphics card but it doesn't work.
I went to System > Administration > Hardware drivers.
It downloads but when trying to install I get an error that says: "SystemError: installArchives() failed"
lspci shows:
Code:
xavi@xavi-laptop:~$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
xavi@xavi-laptop:~$
I have an HP tx2500 tablet pc running 9.04, which I was trying to configure the tablet for using the .fdi method on this page. After I redid the .fdi file, I rebooted, and it gave me a flashing screen, similar to the one i got when I tried to install 9.10.
I tried going into recovery mode and using xfix: bad idea. Then, I tried installing envy and reinstalling the drivers from there. That failed as well.
So now, when I try to manually remove the ati packages,(from command line in recovery mode) it doesn't let me, because of some problem with "fglrx-kernel-source" I can't configure, remove, or purge.
I cannot get my X working with fglrx.
Additional info:
Code: Select all# cat /etc/X11/xorg.conf.d/20-fglrx.conf
Section "Device"
Identifier "Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]"
Driver "fglrx"
EndSection
[Code] ....
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
I have installed the fglrx driver from "Hardware Drivers" and it runs fine, until I launch gnome3 or gnome-shell, it then just locks X (its not hard locked, I can CTRL + ALT + 2/3 etc out) but I cant do anything else.
If I use the mesa / xorg driver its fine.
The trouble is I play one game, and I need the fglrx driver for that game, the mesa one corrupts the 3d engine
It wouldnt be a pain, but i am one of the few who seems to find gnome-shell an improvement, and I get really frustrated when it wont work.
Any idea's on what I can try, other than hopfully having a working system when ATI launches the 10.10 driver on its website (although the leaked rc had the same issue) I only recently got a ATI card so I am pretty new when dealing with the ATI cat's.
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
After installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus.
2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.
The GRUB2 menu loads up fine, and I am logged into Gnome okay right now, but in between Grub & Gnome, I see no log messages during startup. So far, it's just an annoyance, but one of these days an automatic fsck is going to find something, and I won't be able to see it. I have a custom kernel, with fglrx compiled into it, in case that matters. This system has never used radeon drivers, so I can't add any information about how this worked before fglrx; it just didn't work without it. I saw startup messages IIRC with kernel 2.6.32 / Debian 5.0, but I couldn't tell which of the many changes led to this little malfunction. Now using Debian 6.0 / kernel 3.0.0.
Hopefully, this is just a minor glitch in Grub2 or some other .conf file, maybe in /etc/X11.
I'm owning an old single Core AMD (Opteron 148, like Athlon 64 3200+), it can't play h264 1080p-Videos without framedrops in active scenes. I'm also owning an not so old AMD/Ati Radeon HD 2400. It's not an UVD2 card, it's not even UVD+, its UVD i.e. UVD1. All articles regarding GPU h264 decoding I've found so far are saying "for vaapi gpu decoding on linux you need to have a UVD2 card". That's wrong! My UVD1-Card is playing fine some demo movies.
Setup:
Ubuntu "Lucid" 10.4
"deb http://ppa.launchpad.net/nvidia-vdpau/cutting-edge-multimedia/ubuntu lucid main" in /etc/apt/sources.list.d/cutting-edge-multimedia.list
[code]....
(With the original Ubuntu Lucid fglrx (8.723) there's some error, I don't remember the words. It doesn't work for me)It's working. I can play h.264 HD Videos with mplayer and decode it with a Radeon GPU. vlc 1.2 not working so far. It seems it's decoding fine, but screen remains green. Here's a screenshot, no fake! It's a two Monitor setup with fglrx' big Desktop. On the right there's running a movie Trailer (I Am Legend) and on the left there's some status info. Quality is not perfect (as you can see, horizontal displacement), but it's basically working.
I recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.
250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X
I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.
Code: Select all
Signal 11 caught.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
[Code] ....
I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)
Things that I have done thus far:
-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)
Code: Select all
lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
2.24.25
3.14.5
Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?
My hypothesis:
-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)
how I can uninstall my old driver (10.4) so I can update my drivers to 10.5? I have a lot of issues with 120.4 and want to make sure all config files are wiped clean.
View 7 Replies View RelatedDo I need to uninstall the drivers for the old card first?
View 1 Replies View Relatedok so i have a clevo x8100 laptop with two 5780's in crossfire. Im not exactly sure where to check in linux but i remember im using the fglrx drivers...which from what i understand are the crappy "safe" drivers. I've downloaded the latest linux x64 drivers for the card...
do i need to uninstall the old drivers first before i attempt to install the new one? also, if i do need to uninstall the old one, do i need to disable all my compiz special effects too? I could just see that creating a problem. im afraid im ruining my ubuntu install now that i've got everything configured the way i want minus the video drivers.
i downloaded the 11.4 ATI driver from their website. Then, i installed the driver using .RUN file. After installation, my graphics became worst and i cannot enable any effects. i went to system-preference...There were 4 ATI options (2 for the new one, 2 for the older one). i wanted to remove the newly installed 11.4.i went to additional driver and unistall the driver from there. but it uninstalll the older one. The 11.4 is still there in the preference.how to remove this driver i installed from RUN installer?
View 3 Replies View RelatedI have 11.4 in a kiosk environment and only want VLC as my video plug-in. Since 11.4 FireFox crashes whenever it tries to using the application/x-VLC player type. I've tried disabling Totem, selecting VLC as the application/x-VLC type but nothing works. I'd just like to uninstall the Totem plugins completely but don't know how... or find a way to make VLC work in 11.4 with Firefox 4. I installed FF 4.0.1 but no change.
View 3 Replies View RelatedI cannot uninstall Firefox, nor can I uninstall Chromium; one always stays if the other is uninstalled. For example, if I remove Firefox, Chromium will appear in its place and vice versa. This has got to be one of the weirdest bugs I've ever seen on Ubuntu! So, how can I uninstall both web browsers?
View 6 Replies View RelatedWhen I open an open office document from an NFS share it always opens as readonly. This was a problem I had on Arch linux and the fix was to change the locking options in the soffice script but I've tried that fix here and it doesn't work. I've seen a lot of discussions but they all go back to changing the locking options in soffice, has anyone got any alternative fixes or one that definitely works with locking?
View 4 Replies View RelatedI installed Open Office 4 on Debian 8 but when I run the program I get this error message.
root@localhost:/home/paul# openoffice4
No protocol specified
No protocol specified
/opt/openoffice4/program/soffice.bin X11 error: Can't open display:
Set DISPLAY environment variable, use -display option
or check permissions of your X-Server
(See "man X" resp. "man xhost" for details)
Open Office works fine when I run the command "startx" in the Konsole but so far I haven't been able to configure it.
