Ubuntu Multimedia :: NVidia 9400 GT Drivers To Be Reinstalled After 10.04 Upgrade
May 9, 2010
I recently upgraded 9.10 to 10.04. I have Nvidia 9400 GT which drivers I had to reinstall after upgrade. Initially it was lot of work to get the drivers working on 9.10 and who knew for 10.04 it was even harder for me. I was trying to install this version NVIDIA-Linux-x86-195.36.24. followed basic steps like quiting X server first, backing up and then removing xorg.conf file then rebuilding it etc etc ..
After all that, reboot and resolution messed up. My original resolution was 1600x900. Now its on 1024x768 and I tried absolutely everything what is discussed on Linux forums to fix it but no luck at all. Now about error msgs. When computer starts window pops up saying "Fail to initialize NVIDIA kernel module. Please check your system kernel log ...." Then it gives me some options where only two works 1) restart X 2) Load ubuntu with low resolution. Both of these options bring me to 1024x786 mode.
Second error msgs: when I go to 'NVIDIA X server settings' window pops ups saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." When I go to Preferences > Monitor this msg pops up "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and it tells me that it can not recognize monitor even though it did before I tried to install drivers.
Here is my xorg.conf file (I tried to add some lines to it so it might be little different. I still have original which does not work either).
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection .....
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia site.
View 3 Replies
ADVERTISEMENT
Apr 17, 2010
Laptop with Nvidia integrated GO 6100. Now stuck in low graphics mode.
Uninstall/reinstall ENVY. No joy.
"Hardware Drivers" reports that Nvidia drivers version 173 are activated at the moment, but not in use. Got the same report from the 185s. 'nvidia-xconfig' produced no results.
Not sure where to go from here. Please assist.
On a positive note, my onboard Broadcom wireless is working without ndiswrapper.
View 2 Replies
View Related
Feb 17, 2011
Every time the update-manager decides to upgrade the kernel my graphics driver is ****** up. I have had this problem in 10.04 and now in 10.10. Now I get dropped to the command prompt after an upgrade (I can also log in with fail-safe/low graphics mode). The problem is solved if I reinstall the package fglrx so nog big issue but it is rather annoying. What could be wrong? I am using ATI HD4770. I haven't tried open drivers yet.
View 7 Replies
View Related
Jan 28, 2010
I'm looking at the 2009 apple mac mini ([URL]and wondering if anyone has gotten dual head working? I'm putting two 17" or 19" monitors on, so nothing too adventurous. I know that I'll require the "Mini-DisplayPort-to-DVI" to get Dual DVI Adpaters, but I wanted to confirm that dual head would be supported from the start. I'm aware that there are issues with rebooting the device, possibly as a result of the wireless drivers. That doesn't bother me. Dual-head is a requirement I intend installing 9.10 and dual booting macos for firmware updates.
View 1 Replies
View Related
Apr 28, 2010
After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
View 27 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Apr 30, 2011
I'm running Lenny and the nvidia driver is 173.* I need to upgrade to the current nvidia driver but when go to install it I get the message that it was copiled with a different version of gcc and might screw up my kernel. any suggestions to upgrading to the current nvidia driver?
View 6 Replies
View Related
Jan 9, 2010
The only problem I've encountered so far is with my soundcard - a Soundblaster Audigy (basic version). I'm dual booting with XP and followed the exact same procedure as with 11.1. Used GParted to shrink the Windows partition (and yes, I did defragment beforehand) First there was no sound with Opensuse, which didn't really bother me too much as I assumed I needed to d/l some drivers, so fine. I restarted and booted into Windows and find that I have no sound in any applications, yet they appear to be playing, mp3, waves etc and no problems indicated by windows or other programs, in effect the card is fine but not outputting. Reinstalled drivers - no success. Uninstalled the soundcard from Device Manager, didn't work either. In the end I had to physically remove the card,
reboot into windows, then shutdown, insert the card again, then install the drivers. This fixed the problem, but anytime I boot into Opensuse, the same problem occurs, very strange. I'm thinking there may have been a problem during the partitioning stage, maybe some stubborn little windows file didn't want to move during defrag' and got lost. That's the only idea I have at the moment. Tried to remove the Grub Bootloader with 'fixmbr' command, but it still loads.
View 4 Replies
View Related
Apr 5, 2011
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
View 11 Replies
View Related
May 2, 2010
I just upgraded to lynx but my nvidia drivers only say "173" and "recommended" as the two options. no idea which version the "recommended" one is but that's what is enabled. I did an update but still it does not show the 195 drivers that I thought I read were shipping with lucid.
View 3 Replies
View Related
Jul 15, 2010
the url to the nividia drivers for 11.3. They are not yet in the community repos.
View 9 Replies
View Related
Feb 4, 2010
I have a laptop and desktop both with basic installations of 9.10 (Karmic). And, they are networked with a Mac running OS X 10.6.2. Screen sharing simply worked right from the beginning, to and from the Mac, and of course to and from both Ubuntu installs.
Except there was no feedback from one Ubuntu desktop screen being shared. Mouse clicks, mouse movements, and keyboard presses all seemed to have their correct effects. It was just that the results were not fed back to the remote screen.
During troubleshooting, I de-activated (removed) the nVidia accelerated graphics driver (version 185) that had been installed with 9.10 (Karmic). Then screen sharing started to work with the proper feedback to the remote screen.
I tried the pre-upgrade nVidia driver (version 173) and again no feedback from the screen being shared. De-activate the driver and again screen sharing started to work with feedback.
The bottom line seems to be no nVidia proprietary drivers if I want remote screen sharing to work. But this desktop is primarily used as a HTPC with a HDTV monitor. No games. No 3D. Screen sharing is probably more important, but essentially what am I giving up in graphics capabilities by not using those nVidia drivers?
View 2 Replies
View Related
Mar 6, 2010
BlizzPlanet reports that people are seeing their nvidia graphics cards overheat when running the Windows 196.75 driver and playing 3D games. I have to wonder whether I fell afoul of this issue. A week ago I installed the 195.36 nVidia proprietary Linux driver on my Karmic Koala system, after adding the PPD nvidia-vdpau repository to my sources.list. I restarted so the new driver would take effect... and was surprised to see the graphics chip temperature soar to over 130 degrees Celsius. It fried itself. When I opened up the case, I checked the card's fan, and it spun freely, and I'd not heard any noise of the sort that accompanies a dying fan. I'm sticking with 190.53 for now. Has anyone else seen overheating difficulties with the 195.36 driver?
View 2 Replies
View Related
Jul 9, 2010
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies
View Related
Aug 27, 2010
10.04 64-bit
+
NVIDIA GeForce 8500GT 256MB
So I kind of had ubuntu working, but then I tried updating to the newer nvidia drivers and I broke it. I had to uninstall/purge nvidia so as to get ubuntu past the black screen/no signal to monitor...
I had been using a "Broadcom B43 wireless driver" which used fwcutter to extract firmware from various source files. I have never been able to get this install working with nvidia drivers and am about ready to try anything (including yet another reinstall).
**Nvidia drivers 96, 173, & current cause my system to freeze, lock up, reboot, fail to boot, etc. You name it and it's happened.**
I tried using synaptic, jockey and the terminal to install nvidia drivers. Then I tried adding the swat ppa and installing through System-Admin-Hardware Drivers to no avail.
Every time I start my PC it displays this window.
And when I open Hardware drivers this is what appears.
View 8 Replies
View Related
Sep 16, 2010
I executed the following and after a restart I have no signal in my monitor:
Code:
sudo service gdm stop
sudo apt-get remove --purge nvidia*
How can I fix this?
View 1 Replies
View Related
Nov 22, 2010
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal:
I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question:
My card is supported with the Legacy NVIDIA driver: 96.43.xx driver
Latest version on their website:
Version: 96.43.19 Certified
Release Date: 2010.11.16
Operating System: Linux
Language: English (U.S.)
File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
View 6 Replies
View Related
Jan 23, 2011
I'm having another go at ubuntu!I have Ubuntu 10.10 running (a fresh install).I went to the nvidia site and downloaded the linux drivers for it, (it's a .run file).So I try runnig it via the terminal, it goes great untill it mentions that I need to exit the X Window system?
So I tried pressing ctrl+alt+f2 (switches to a root terminal?) and tried runnig it from there but no luck either
View 8 Replies
View Related
Jun 6, 2011
I'm having issues getting the nvidia-current drivers working with a GeForce 8400 graphics card on Ubuntu 10.10 (x64). After running nvidia-xconfig and restarting, X fails to start with an error: No devices detected.
Here is my xorg.conf:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[code]....
View 3 Replies
View Related
Mar 28, 2010
I've bought Sony VAIO F11 and I can't find any driver for video card. Is it possible to configure 195.XX NVidia driver for this card? It doesn't work now ;(,
View 1 Replies
View Related
Jun 4, 2010
I have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
View 9 Replies
View Related
Oct 7, 2010
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
View 9 Replies
View Related
Apr 28, 2011
since installing nVidia graphic drivers I can't adjust volume using volume button nor using volume keys. The volume icon has 3 horizontal lines like Ubuntu couldn't find audio device. Morover when I try to run pulseaudio there is "/home/chris is not ours" message.
Despite these facts audio is playing and I can adjust volume using alsamixer, but it is extremely not comfortable to enter console each time I want to volume up/down..
View 3 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
May 27, 2010
I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.
View 9 Replies
View Related
Jun 6, 2010
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
View 8 Replies
View Related
Oct 31, 2010
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
View 2 Replies
View Related
May 2, 2011
I'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
View 8 Replies
View Related
Jun 21, 2011
It seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
View 6 Replies
View Related
Apr 6, 2010
I recently installed ubuntu 9.10 dual boot. All went well until I upgraded the video drivers for the nvidia chipset on my motherboard. If I leave Gnome to start with the single user i created i get a black screen and 'mode not supported ' message on the monitor. BUT if i drop to root and 'startx' all is well and i can adjust the various screen resolutions and they all work well.
At this point i created another user name to check, and that works fine also, but if i drop back to the original user i get no screen unless i select 800x600, although all the other resolutions work fine with root and the other user name. Im stumped as I presume there's only one xorg.conf file for all users.
View 1 Replies
View Related
