Ubuntu Multimedia :: Fglrx Turning Vlc Into A Snail?
May 28, 2010
I just installed Ubuntu 10.04 64-bit version and everything worked fine so far except for the fglrx driver as it seems. I wasn't able to enable desktop effects and couldn't start games like openarena or nexuiz.
Therefore, I installed the fglrx driver from ATI's site and got everything working fine. Unfortunately it introduced a problem with vlc and the window manager in general. If I go into fullscreen in vlc it takes at least 2 seconds until the screen reacts. Also, if I tab through windows there is at least a second delay which is all very very annoying. I removed the driver again and re-installed fglrx from the repos. I now have two entries for the Catalyst Control Center (normal + administrative) under System->Prefrences which is annoying but not the reason for this thread.
The main problem remains the delay with window tabbing (with desktop effects disabled) and vlc going into fullscreen (this also applies for ..... videos which also lag in fullscreen mode).
The card is a Radeon HD 4830, processor is an AMD Phenom II X4 810.
I want my video card to stop processing an image to my integrated monitor and only process images to my external monitor.
My problem is that I use my Toshiba Satellite M65 (which is a laptop) as a desktop: I use an external monitor, external keyboard, and of course an external mouse. I only recently started using Ubuntu after many years of Windows XP and I just realized that both my laptop's integrated monitor and my external monitor are 'on', displaying the same image. I want my video card to stop processing an image to my integrated monitor.
i'm running Ubuntu 10.04 server and want to turn on the pc-speaker warning-beep.I commented out the line in /etc/modprobe.d blacklist.conf:
#blacklist pcspkr
The beep is now working for root. But somehow it won't work if i log in as a normal user. (i don't know why, but if i install beep the beep-command works for all users...unfortunately beep seems not to make a warning sound in all cases so this is no solution for me)
Take an mp3 and play it while turning down the volume certain parts of the song. Like, if i wanted to hear the guitar but not the vocals, Is there such a program out there?
I'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
I have a problem with my computer running debian testing with kde. When after a while I'm away form keyboard my screen turn off for power saving, but I cannot in any way turn it on again.
I tried moving mouse, pressing some key, Ctrl + Alt + Del, Ctrl + Alt + BackSpace, Ctrl + Alt + Esc, and also Ctrl+Alt+F1/2/ecc.. No way. I had to reset my computer every time.
So im not sure exactly what caused this but when playing movies through the xine-ui has stopped keeping my system active causing my monitor to turn off. This started happening about a week ago and I cant remember installing any xine related updates, but was wondering if anyone knows how to make xine keep the system active to prevent this. I could have sworn there was an option for this but I cant seem to find it anymore.
Since 2.6.38 ath9k has become slow as a snail. After searching this issue I have found a solution. Create a file called /etc/modprobe.d/ath9.conf in this file enter thisoptions ath9k nohwcrypt=1Reboot or reload the module and enjoy high speed again.
I'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
Just after I boot up I get this wierd HDD activity that lasts for some time during which my system runs at snail Pace and or Hangs. After a while the activity stops and things are good and then randomly it all starts again. I have read some forum post on constant HDD activity but they do not seem to apply to my problem. I am Running 11.3 with a quad core AMD 64bit CPU and 4GB of memory.
I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
My new machine with a fresh install of Lucid boots up and displays the standard gdm login screen showing the list of users which looks fine. After you hover over a name or other option menus on the display, the pop-up or screen change is rendered poorly. It very slowly fixes itself over time. After I login everything works just fine even with the extra "desktop effects" I recently discovered that if I set the desktop effects to none, I get the same effect on my desktop. I've attached a screen capture to illustrate what I see but find hard to describe. The little horizontal bars will gradually be fixed over a minute or so. Dragging the window around smears that effect around the screen. I've been sniffing around the web off and on for a couple months now but haven't found anything that sounds similar.
Now for some hopefully helpful configuration data: This system is based on an Asus M4A89GTD PRO/USB3 motherboard with integrated ATI radeon video, and a 6 core processor. Lucid 32bit.
$ uname -a
Linux gandalf 2.6.32-26-generic-pae #48-Ubuntu SMP Wed Nov 24 10:31:20 UTC 2010 i686 GNU/Linux
$ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 4290 OpenGL version string: 3.3.10317 Compatibility Profile Context
Every time the update-manager decides to upgrade the kernel my graphics driver is ****** up. I have had this problem in 10.04 and now in 10.10. Now I get dropped to the command prompt after an upgrade (I can also log in with fail-safe/low graphics mode). The problem is solved if I reinstall the package fglrx so nog big issue but it is rather annoying. What could be wrong? I am using ATI HD4770. I haven't tried open drivers yet.
I have an HP tx2500 tablet pc running 9.04, which I was trying to configure the tablet for using the .fdi method on this page. After I redid the .fdi file, I rebooted, and it gave me a flashing screen, similar to the one i got when I tried to install 9.10.
I tried going into recovery mode and using xfix: bad idea. Then, I tried installing envy and reinstalling the drivers from there. That failed as well.
So now, when I try to manually remove the ati packages,(from command line in recovery mode) it doesn't let me, because of some problem with "fglrx-kernel-source" I can't configure, remove, or purge.
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
I have installed the fglrx driver from "Hardware Drivers" and it runs fine, until I launch gnome3 or gnome-shell, it then just locks X (its not hard locked, I can CTRL + ALT + 2/3 etc out) but I cant do anything else.
If I use the mesa / xorg driver its fine.
The trouble is I play one game, and I need the fglrx driver for that game, the mesa one corrupts the 3d engine
It wouldnt be a pain, but i am one of the few who seems to find gnome-shell an improvement, and I get really frustrated when it wont work.
Any idea's on what I can try, other than hopfully having a working system when ATI launches the 10.10 driver on its website (although the leaked rc had the same issue) I only recently got a ATI card so I am pretty new when dealing with the ATI cat's.
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
After installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus. 2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.
The GRUB2 menu loads up fine, and I am logged into Gnome okay right now, but in between Grub & Gnome, I see no log messages during startup. So far, it's just an annoyance, but one of these days an automatic fsck is going to find something, and I won't be able to see it. I have a custom kernel, with fglrx compiled into it, in case that matters. This system has never used radeon drivers, so I can't add any information about how this worked before fglrx; it just didn't work without it. I saw startup messages IIRC with kernel 2.6.32 / Debian 5.0, but I couldn't tell which of the many changes led to this little malfunction. Now using Debian 6.0 / kernel 3.0.0.
Hopefully, this is just a minor glitch in Grub2 or some other .conf file, maybe in /etc/X11.
I'm owning an old single Core AMD (Opteron 148, like Athlon 64 3200+), it can't play h264 1080p-Videos without framedrops in active scenes. I'm also owning an not so old AMD/Ati Radeon HD 2400. It's not an UVD2 card, it's not even UVD+, its UVD i.e. UVD1. All articles regarding GPU h264 decoding I've found so far are saying "for vaapi gpu decoding on linux you need to have a UVD2 card". That's wrong! My UVD1-Card is playing fine some demo movies.
Setup:
Ubuntu "Lucid" 10.4 "deb http://ppa.launchpad.net/nvidia-vdpau/cutting-edge-multimedia/ubuntu lucid main" in /etc/apt/sources.list.d/cutting-edge-multimedia.list
[code]....
(With the original Ubuntu Lucid fglrx (8.723) there's some error, I don't remember the words. It doesn't work for me)It's working. I can play h.264 HD Videos with mplayer and decode it with a Radeon GPU. vlc 1.2 not working so far. It seems it's decoding fine, but screen remains green. Here's a screenshot, no fake! It's a two Monitor setup with fglrx' big Desktop. On the right there's running a movie Trailer (I Am Legend) and on the left there's some status info. Quality is not perfect (as you can see, horizontal displacement), but it's basically working.
I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.
Code: Select all Signal 11 caught. ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored. ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
[Code] ....
I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)
Things that I have done thus far:
-Verified that the video card is good -Tried Open-source graphics drivers -Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center. -Reinstalled "zenity" to ensure that it was not corrupted. -Verified which Gtk+ versions that I have installed(see below)
Code: Select all lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0 2.24.25 3.14.5
Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?
My hypothesis:
-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit) -My graphics card may not be supported by Ark: Survival Evolved yet. -I am missing some libraries each time I have attempted different video drivers. -Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)
Having just successfully installed fallout 3 (yippee), one question arises.
Is it possible to turn off (and eventually back on) all superfluous process during gaming ? As an ex-win xp user, there was an app called "game booster", i think, that did this.
The process i have in mind are things like fancy compiz settings, dockbar X, and any upgrades that might be taking place in the background.
Again, it is important that i can restart these functions after kicking super-mutant ***.
