I'm using ubuntu lucid lynx (64bit).
In alsamixer, the speakers volume is set to zero and I can't hear anything (headphones work properly, though). I turn it up and the speakers work, but each time I reboot it goes back to zero. I've gone through the alsa wiki without finding anything. Can someone tell me how to change the default values in alsamixer so speakers work on start?
I have an imac and i recently decided to dual boot Ubuntu as well.
The sound is fine on the mac partition but the internal speakers dont work on the Ubuntu side.
headphones do work but the volume is oddly low
Nothing is muted on alsamixer, and I think i have the right driver for my sound card
I just built my first computer from the ground up and installed linux x86_64, FC10, and among other problems, i cannot get the volume of my speakers to play much above a low volume. i have the pulseaudio volume control set to 100% for the output and input levels. i adjust all my video and audio players volumes to the max also, but the volume from the speakers is still very low. the speakers worked fine with my old hp computer. is there anything i can do, adjust to fix this?
View 4 Replies View RelatedI own a netbook (samsung nf210 to be exact) which has Linux Mint 10 installed. What I want to do is to make both, headphones and speakers, play the same output at the same time. I believe it is possible to make it since many people are facing such condition and treat it as a pulseaudio bug (or smth like that) And it would be perfect if it was possible to easily switch between the modified configuration (dual output) and original configuration. I've noticed there are some profiles (analog output, duplex, surround etc.). Is there any way to modify those profiles? If it was, I could modify the Analog Surround Output 4.0 profile and assign rear speakers to headphones and front speakers to internal speakers of my computer.
View 1 Replies View RelatedWhen I go into Sound Preferences I can crank up the output volume above 100%, making it audible from my monitor's built in speakers.
(this is for a kiosk that doesn't have room for extra powered speakers) Every time I reboot it resets output volume to 100%. Is there a way to change the volume back to 125% or whatever max is so the general public can hear the video that is played after a reboot? (this is to be a permanent installation that won't even have a keyboard or mouse attached, so automating this is a must)
I use headphones and have an MCP73 sound device; am running OpenSUSE 11.4.
On each restart, I get no sound. I have to go to YAST, Hardware, Sound, Other, Volume. The 'Other channels', Front slider is at 0%. If I slide it up to 100%, my headphones start working. At this point the Help text says to press 'Next' to save the settings, but there isn't a 'Next' button...just a Cancel and OK. OK keeps the new setting, but apparently doesn't save it permanently.
What can I do to avoid having to reset this slider every time ?
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I have volume on my SUSE 11.1 But it is very weak compared to my MS OS.
View 1 Replies View RelatedIs there a way to make the db waveform the default in audacity.
View 1 Replies View RelatedCan I just out ubuntu 10.04 on and I installed vlc and when I right click on a video file and say open with and the box is ticked to open with vlc but it doesn't make vlc the default player. I dunno what I'm doing wrong, maybe there is another way?
View 5 Replies View RelatedHow do I make VLC media player the default video player, so that if I double click a video file VLC opens it?
View 2 Replies View RelatedHave got VLC Media Player to play all my CD's and DVD's. how i can make VLC Media Player the default program
View 3 Replies View RelatedI really like using Audacious, but Rhythmbox (which isn't as horrible as iTunes, admittedly, but I still don't think much of that style of player) is set up as the default audio player on my laptop. I'm running Lucid Lynx on it. When I go to System > Preferences > Preferred Applications, Audacious doesn't come up in the drop-down menu under the Multimedia tab. Anyone know of any way I can change this from Rhythmbox to Audacious?
View 1 Replies View RelatedIm having trouble with playing sound in F14. I used to have F12 where everything worked perfect, recently I've changed to F14 (complete reinstall) and I noticed that my speakers don't work and the sound through the headphones is to quiet.It is as if F14 doesn't recognize my sound card?
View 7 Replies View RelatedI've had this problem since I fresh installed Fedora on my laptop: I can play sounds fine, but I can't mute/make it louder or softer. I couple days ago (right after I installed) there was a notification saying there was an error with something in the sound and it was "falling back to default". Recently, the notification stopped popping up but the problem persists.
I'm not 100% positive as to what type of speakers my laptop has. I know they're made by JBL, but on Windows they're handled by "RealTek HD Audio Manager" and in Device Manager there's 2 different audio devices: Realtek High Definition Audio and ATI HDMI Audio. Neither of them say they're JBL brand. The most information I can get out of the specs of my laptop found on Newegg is that they're "JBL stereo speakers (1.5 watt x 2)".
I am using the Gnome desktop in Lenny 5.03The default Gedit paper size is "US Letter", which is almost right for my HP Laserjet 4L, except that about .5 inch at the top and .25 inch at the left margin are cut off.I have defined a "Custom Size" under File -> Page Setup -> Manage Custom Sizes... with margin settings that solve the problem, but this "Custom Size" only remains the default Paper Size for printing until Gedit is closed.Using what appears to be the same gnome dialog from epiphany and evolution, the Papersize settings stick, but not from Gedit. I cannot locate any configuration file to edit, and nothing in the gconf editor seems to apply.
View 4 Replies View RelatedI've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies View RelatedI'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies View Relatedsince using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies View RelatedMy volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
View 2 Replies View RelatedI'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies View RelatedDebian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies View RelatedMy friend and I have a problem. We both wish to listen to songs at the same time. But the problem is that our choices of songs are different. So, I suggested that he listen to his favorite song on the speakers whilst I listen to my favorite song via headphones.
But, whenever we do try this idea the speakers won't play when I plug in the headphones.
Anyway so we can make both speakers and headphones play different songs at once?
how to make irssi beep through the speakers whenever i get a message on IRC? I have tried the set beep thing on but doesnt work.
View 4 Replies View RelatedI've been running Ubuntu on my Dell Studio 1749 laptop since I got it, around 8 months ago.I recently upgraded to Maverick 10.10 64-bit, reformatting and partitioning my hard drive in the process (got rid of windows since I never use it) and it was working perfectly until last Wednesday (22.4.2011). On Wednesday I unplugged my usb headset while in a Skype call to switch to the internal speakers and my computer freaked out, black-screened, and froze. When I rebooted, the internal speakers had stopped working completely, even though the sound works perfectly on both sets of headphones I have.
I've tried most of the fixes that have been presented in other threads and none of them are working, including rebooting the laptop with the headset in. I've tried that with both of my usb headsets, even though I don�t like using the one that it froze on for the exact reason that any time I have audio playing with that headset and it gets unplugged, it black-screens and freezes my laptop. Actually audio doesn�t even have to be playing, sometimes unplugging it even with nothing playing still freezes my laptop. It does it once in a while with my other usb headset, as well, but not every time or anything close to that often.One thread suggested that modifying /etc/modprobe.d/alsa-base.conf by appending the following line to the file would work:
Code:
options snd-hda-intel model=dell-m6
But that did nothing at all. Someone else said that they saved a copy of alsa-base.conf and replaced the whole thing with that line, so I did that, with no change. Then I purged alsamixer using
Code:
sudo apt-get purge alsa-base
and
Code:
sudo apt-get purge alsa-utils
Then I rebooted, and reinstalled them, which did not fix the issue. However, it did replace the alsa-base.conf file that I modified which shows me that it actually did purge it. (I was an idiot the first time I tried to purge it and only purged and reinstalled alsa-utils..xD So the file did not get replaced, which was when I realised my mistake) I have NOT modified the new file, although I did copy the contents to a text file in case I need to try that fix again.I should also mention that the speakers do work when first booting up Ubuntu to the log-in screen, both with and without headphones I ran the alsamixer diagnostic at the beginning of all this, here's the link: [URL] And then ran it again after purging and reinstalling alsamixer, here's the new link: [URL] I have tried messing with the settings, disabling the headset, setting the input and output manually to internal speakers while the headset is still plugged in, making sure with GNOME alsa-mixer that the speakers are not muted, rebooting with the headsets in and then unplugging them.
I want to change the default sound output volume to be high than it normally is when the system starts.
How can i change it?
I have mounted samba volume and I need to have write permissions for every new folder that's being created (currently, by default, on every newly created folder i have only read and execute permissions).I tried changing umask, but with no effect on mounted folder, umask changed only for local filesystem. I tried mounting with umask option, but with no effect again.I'm using ArchLinux on this machine, and I installed samba using default package manager (pacman).
View 1 Replies View Related