Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 RepliesI'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies View RelatedI've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies View Relatedsince using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I left for a week and when i came back, the light-up buttons on my hp laptop no longer worked- they cannot control volume any more.
View 1 Replies View RelatedI disabled pulse audio in favor of just working with jack, alsa_in & alsa_out and everything works pretty well except for one thing.
When I enable pulseaudio I can control the volume with my multimedia keys, volume up, volume down, mute.
If I kill pulseaudio not only do I not have volume controls but the little widget in the top bar seems to be broken.
I looked in my /etc/acpi/ folder and see these files relating to volume
/etc/acpi/volupbtn.sh
Code: Select all#!/bin/sh
test -f /usr/share/acpi-support/key-constants || exit 0
. /usr/share/acpi-support/key-constants
acpi_fakekey $KEY_VOLUMEUP
[Code] ....
running xev i get this output for those buttons:
Code: Select allFocusIn event, serial 36, synthetic NO, window 0x1e00001,
mode NotifyUngrab, detail NotifyAncestor
KeymapNotify event, serial 36, synthetic NO, window 0x0,
keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[Code] ....
nothing comes up for those keys, the terminal cursor just blinks.
also one more thing, those keys are set to shortcuts in the settings->keyboard->shortcut menu.
I can control my device with the amixer so I would like to just bind amixers functions to the keys but I don't really know how to go about doing that.
How can I bind amixers commands with those keys?
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies View RelatedI am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies View RelatedMy volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
how to set at least my headphone/lineout socket precisely to -15dB at boot up? If I knew how to make amixer commands permanent, I wouldn't be re-raising the issue
The Gnome GUI volume control is fine in normal circumstances but to set it accurately requires a bit too much fiddling, IMO - now if someone were to adjust the programming so a dB readout accompanies slider movement, rather than as a pop-up after adjusting the slider, 'twould be more ergonomic, IMO.
I normally run KDE, but installed GNOME as well on my netbook (running openSUSE 11.2) to try out. However, I noticed there is no longer any volume control applet. The GNOME panel control is labeled 'deprecated', and the volue Fn keys, which work fine in KDE, do not work at all. I tried launching the PulseAudio Volume Control app, but it gives me a "Connection Failed: Connection Refused error". I still have sound, and I can adjust the volumes in alsamixer, but is rather inconvinient. What is the "right way" to adjust volumes in 11.2's GNOME?
View 9 Replies View Relatedso i just got a nice hp keyboard from my dad (very slim) to use with my laptop and external monitor. it has a volume up key, a volume down key, and a mute key. the only problem is, the computer thinks they are actually letter keys. whenever i press volume up, it thinks i hit "b" and types that on the screen. the same goes for the other two buttons. is there anyway i can get them to function normally? everything else works.
View 3 Replies View Relatedi get this error brand new lynx installation when i try gnome-volume-control from the command line,
i get this error
Code:
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
** (gnome-volume-control:20731): WARNING **: Connection failed, reconnecting...
what could be the problem?
I use a Compal KLH B0 laptop if I recall correctly. (It's rebranded but great!) It uses a completely standard keyboard where Fn+F7 and Fn+F8 are the volume buttons. This happens with all SDL games I have.
View 2 Replies View RelatedI just installed Linux Mint XFCE (newly-released Debian Based OS)My Problem is that I cannot get the volume buttons on my keyboard to work. I've done some research and it appears I need to install the "xfce4-volumed" package and I have done so. Still the buttons do not work. I've also tried installing xfce4 and also gstreamer.Nothing has worked.
View 4 Replies View RelatedIs there a way to change the extra mouse buttons into volume up/down?
View 1 Replies View RelatedHow do i change the channel gnome-volume-control controls? I want it to control pcm but it controls master front. There used to be a setting right in the sound preferences but i think it disappeared with the 9.10 upgrade or at least i can not find it anymore. I've looked on the at gnome alsa mixer while changing the volume and master front gets controlled while pcm is always set to max. The problem with this is that master front does almost nothing to change the actual volume.
If i control pcm with the alsa mixer the volume range is fine. I've found a manual for gnome-volume-control on [URL].en and the pic there actually looks like i remember it looking. But i can not get to that screen. What i have looks completely different. Its a window with the tabs Sound Effects | Hardware | Input | Output | Applications. But there is no sight of any channel settings and the only slider there does the same as the applet one.
The volume control in the Gnome panel system tray has disappeared from my wife's Ubuntu 10.04 system with the master volume set to zero.I was able to restore sound via System->Preferences->Sound master volume, but this is not particularly convienent. How do I restore the panel volume control? (the speaker icon on the panel, between the Network arrows and Chat/Mail setup icons).
View 3 Replies View RelatedI've run in to one problem which makes me go back to Windows 7,and that's not being able to change my extra mouse buttons to function as volume up and down. I watch a lot of movies and series on my PC, and I use my wireless mouse to control volume and to pause and play. The last 2 are no problem, but I can't seem to find an option to change the function of the extra mouse buttons.I've looked all over the net, and read various forums, they don't have a clear answer or even an idea how to accomplish this. So I turned to this forum, which I should have done in the first place.
View 2 Replies View Relatedoriginally my sounds worked completely, but now I only have sound out of the headphone jack. I used all the OEM software originally, but ended up following this step-by-step guide to run all pulse audio. After installing that I noticed that the sound keys on my laptop still showed that they changed the volume, but didn't have any effect in PulseAudio Volume Control... fixed that by changing the keyboard layout. While that bugged me the sound still came out of my speakers and headphone jack, but just recently the speakers randomly stopped working. Has anyone else experienced this?Computer:Lenovo 3000 N100 0768-4JUWindows 7, and Ubuntu 9.04*Edit- I tried to make it in one post, but it would not allow me yet saying I tried to post a link.
View 5 Replies View RelatedI've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
I have a Dell Latitude D830, with an intel sound card (see below), and I'm having problems with the granularity of volume control off the headphone jack... In particular, I find that if the combination of master volume and headphone volume is too low, then the headphone jack just stops outputting...
(I.E. Put master at 100%, and I can take headphones down to a few percent, but the lower bound of the headphones is still way too loud, or vise versa, put master at like 10%, and the hadphones will only output for about 80% to 100% range) This is problematic as I use earbuds, and anything over 30% is pretty deafening... I ran gentoo on this laptop for a couple years, no problems, and originally installed debian stable, that worked fine, then changed to debian testing, and ran thru a massive package update and kernel upgrade, and afterward, volume control problems...
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf6ffc000 irq 21
I don't know much about lvm and I've managed to screw up a drive. I had a 500GB drive with FC14 on it and I wanted to copy over a load of data to my new 1TB that was replacing it. I set up my new install the same way as the old...including the same volume names (error number 1 I think) I successfully mounted the old/500GB drive (using vgscan and vgchange -a y etc.) using a laptop (running FC13) and an external hdd cradle. I could access the files I wanted but this wasn't the machine I wanted to copy them to (I was doing this while waiting for the install to finish on the new drive).
When I tried the same process on the new install I found that having two lvm with the same name meant I couldn't mount the external one. So I opened the disk utility (palimsest) and was going to change the name of the old volume group but it wouldn't let me do that. I then thought maybe I could get away with just changing the name of the partition where the files were and maybe I could add it to the mounted group or something so I changed it to lv_home2. This changed the name of my new/1TB lv_home to lv_home2 as well. So thinking that wasn't the answer I just changed the name of the new lv_home2 back to lv_home.
From that point on I haven't been able to see the old drives partitions (the new volume group still works so far). I has a physical volume but the volume group and volume names are gone from view. When I try to vgscan on my main computer or the laptop I had it working on earlier I get:
[Code]....
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies View RelatedI'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies View RelatedI'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....
I've got a Toshiba L650, Debian testing/unstable, KDE4.4.5. The sound worked when I first installed everything (played a movie in dragon player, etc), but shortly thereafter it stopped working. It seems like the hardware is okay (all hardware is recognized, all relevant modules loaded, volume in alsamixer at 100%, the system beep -- set in the BIOS -- works), but I still can't get sound to play. Once or twice, right before KDE shutdown, I could hear the exit sound, but that's it. Last night I exited KDE (without hearing a sound), shutdown kdm, then:
mv $HOME $HOME.backup
mkdir $HOME
and restarted kdm and kde...still no sound! I created another user, and still no sound!
In Intrepid Ibex, I was using the left Super key as Volume Down and the right Super key as Volume Up, because it was just so convenient.
However when I go to the "Keyboard Shortcuts" window in Karmic, it doesn't let me assign the Super keys to anything. I mean like, I can use the Super Keys along with other keys, but not by themselves.
Is it somehow possible to use the Super keys for Volume Up and Volume Down in Karmic?