General :: Volume From Speakers Still Very Low / Make It High?
Jan 4, 2009
I just built my first computer from the ground up and installed linux x86_64, FC10, and among other problems, i cannot get the volume of my speakers to play much above a low volume. i have the pulseaudio volume control set to 100% for the output and input levels. i adjust all my video and audio players volumes to the max also, but the volume from the speakers is still very low. the speakers worked fine with my old hp computer. is there anything i can do, adjust to fix this?
Several days ago, I replace my PC's motherboard and now sound is too low - I can't hear practically anything, I used alsamixer to configure output volume level to normal, but this won't survive reboot. I tried to use 'alsactl' and saveed rules, and edited rc.local to restore - but it didn't help. Can anyone tell me how to fix it?
In alsamixer, the speakers volume is set to zero and I can't hear anything (headphones work properly, though). I turn it up and the speakers work, but each time I reboot it goes back to zero. I've gone through the alsa wiki without finding anything. Can someone tell me how to change the default values in alsamixer so speakers work on start?
I have an imac and i recently decided to dual boot Ubuntu as well. The sound is fine on the mac partition but the internal speakers dont work on the Ubuntu side. headphones do work but the volume is oddly low Nothing is muted on alsamixer, and I think i have the right driver for my sound card
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
My laptop is a Dell Inspiron 510m with onboard Intel 855 sound (STAC 9750 AC97). The sound was perfect with WinXP, but with Ubuntu it's tinny and lacks richness and vibrates and distorts at higher volumes. I've played around with Alsamixer and changed the driver from ALSA to OSS4 and it has improved slightly, but still not perfect. Is it just not gonna get any better, should I not be expecting it to be as good as WinXP?
I've seen on the Intel site a Linux driver for my controller, it's a tarball but it won't compile after extracting it (read on this forum that someone had the exact same problem with that driver). Will the Intel driver not help, does the problem go deeper than just the driver? It would be perfect it you could just wrap the Dell/Intel driver and use that (just like with wireless ndiswrapper).
I am getting a high pitched ringing sound coming from my speakers and headphones on 9.10.Does anyone have any ideas what is causing this problem and how to fix it? It is really annoying after awhile and is headache inducing.I've tried switching from PulseAudio and ALSA with no changes.
I upgraded to 11.04 today, and ever since the upgrade my speakers (and headphones; any audio device) emit a high-pitched shriek when connected to the computer. This only happens after I enter my password on the login screen, and only in Ubuntu. There's no problem when I boot Windows.
The sound is very high pitched and my speakers play no other generated sounds while emitting this static. Obviously, I'd like to be able to have sound and listen to my music, so this needs to be fixed.
My problem is extremely slow write on hard disk and 100% cpu usage and it happens when I want to write something on the hard derive not any other external derive.
Tried a fresh ubuntu install. No change. I am not even sure if it is a software or hardware problem.
Running Suse 10.0 on a lenovo idea pad and I am having a problem getting the volume set high enough to hear any music, dialogue!. I have set the volume control up as far as it will go but can hardly hear anything. Had this problem running Ubuntu on a Sony laptop but managed to resolve the problem but cannot remember what I done.
I am using a Dell Inspiron Laptop 1464. I have Ubuntu 11.04 Installed, and every time I have the volume at MAX and especially when I'm listening to music that has like high bit-rate (342) or what ever, there is a glitch in the sound, it sounds like when a CD skips or when it is scratched. I tried installing all types of different mp3 encoders and still the same.
Also it is the same when I use Banshee or Rhythumbox.
Im having trouble with playing sound in F14. I used to have F12 where everything worked perfect, recently I've changed to F14 (complete reinstall) and I noticed that my speakers don't work and the sound through the headphones is to quiet.It is as if F14 doesn't recognize my sound card?
I've had this problem since I fresh installed Fedora on my laptop: I can play sounds fine, but I can't mute/make it louder or softer. I couple days ago (right after I installed) there was a notification saying there was an error with something in the sound and it was "falling back to default". Recently, the notification stopped popping up but the problem persists.
I'm not 100% positive as to what type of speakers my laptop has. I know they're made by JBL, but on Windows they're handled by "RealTek HD Audio Manager" and in Device Manager there's 2 different audio devices: Realtek High Definition Audio and ATI HDMI Audio. Neither of them say they're JBL brand. The most information I can get out of the specs of my laptop found on Newegg is that they're "JBL stereo speakers (1.5 watt x 2)".
Motherboard: Asus P5KPL-CM Audio Chipset: VIA VT1708B
No linux sound drivers on Asus' site. No ubuntu 9.10 drivers on VIA site. Low sound with default drivers. I've edited /etc/modprobe.d/alsa-base.conf with options snd-hda-intel model=3stack, but no luck. I actually had to do a sudo sh then edit it that way with vi because it was read only. Didn't do anything.
I've just noticed that unrar is suddenly taking minutes to extract instead of seconds.
I can remember if its recently been updated, but I've uninstalled and reinstalled it and the version is: unrar.x86_64 0:3.7.8-3.fc10
I've found a few Ubuntu posts about it on Google, but in true Ubuntu fashion nobody has any answers!
What's odd is that when I unrar a file from (Nautilus or "unrar x *.rar") it takes say 4mins, then if I do it again it takes 15secs, like as if its caching somewhere.
I am using Redhat linux 9.0 and using squid proxy server.My problem is tht i my squid server is responsing very slowing. whenevr i try to open sites the site starts to open after 3 or 4 seconds and often squid does not open the complete site. its stop the site in middle. My squid Configurtion is below. Is there any need to tune the system parameters Like from 'SYSCTL.conf' for better diskd performence or another problem. at this time i am using default system parameters. Please help me in detail what is the reason of squid slow performence if there ia a need of any system tuning please tell me in detail. I am very thankfull to you.I am really worried about slow performence of the squid. I also try to offline_mode on but the same problem. code...
My friend and I have a problem. We both wish to listen to songs at the same time. But the problem is that our choices of songs are different. So, I suggested that he listen to his favorite song on the speakers whilst I listen to my favorite song via headphones.
But, whenever we do try this idea the speakers won't play when I plug in the headphones.
Anyway so we can make both speakers and headphones play different songs at once?
I have CentOS 5.5 x86_64 with Apache, php and mysql. I have just installed OTRS (helpdesk - trouble ticket system) on that server and no users. This system works with perl, apache and mysql. I notice that is slow to respond and at times unresponsive the apache welcome page. code...
I own a netbook (samsung nf210 to be exact) which has Linux Mint 10 installed. What I want to do is to make both, headphones and speakers, play the same output at the same time. I believe it is possible to make it since many people are facing such condition and treat it as a pulseaudio bug (or smth like that) And it would be perfect if it was possible to easily switch between the modified configuration (dual output) and original configuration. I've noticed there are some profiles (analog output, duplex, surround etc.). Is there any way to modify those profiles? If it was, I could modify the Analog Surround Output 4.0 profile and assign rear speakers to headphones and front speakers to internal speakers of my computer.
I've been running Ubuntu on my Dell Studio 1749 laptop since I got it, around 8 months ago.I recently upgraded to Maverick 10.10 64-bit, reformatting and partitioning my hard drive in the process (got rid of windows since I never use it) and it was working perfectly until last Wednesday (22.4.2011). On Wednesday I unplugged my usb headset while in a Skype call to switch to the internal speakers and my computer freaked out, black-screened, and froze. When I rebooted, the internal speakers had stopped working completely, even though the sound works perfectly on both sets of headphones I have.
I've tried most of the fixes that have been presented in other threads and none of them are working, including rebooting the laptop with the headset in. I've tried that with both of my usb headsets, even though I don�t like using the one that it froze on for the exact reason that any time I have audio playing with that headset and it gets unplugged, it black-screens and freezes my laptop. Actually audio doesn�t even have to be playing, sometimes unplugging it even with nothing playing still freezes my laptop. It does it once in a while with my other usb headset, as well, but not every time or anything close to that often.One thread suggested that modifying /etc/modprobe.d/alsa-base.conf by appending the following line to the file would work:
Code:
options snd-hda-intel model=dell-m6
But that did nothing at all. Someone else said that they saved a copy of alsa-base.conf and replaced the whole thing with that line, so I did that, with no change. Then I purged alsamixer using
Code:
sudo apt-get purge alsa-base
and
Code:
sudo apt-get purge alsa-utils
Then I rebooted, and reinstalled them, which did not fix the issue. However, it did replace the alsa-base.conf file that I modified which shows me that it actually did purge it. (I was an idiot the first time I tried to purge it and only purged and reinstalled alsa-utils..xD So the file did not get replaced, which was when I realised my mistake) I have NOT modified the new file, although I did copy the contents to a text file in case I need to try that fix again.I should also mention that the speakers do work when first booting up Ubuntu to the log-in screen, both with and without headphones I ran the alsamixer diagnostic at the beginning of all this, here's the link: [URL] And then ran it again after purging and reinstalling alsamixer, here's the new link: [URL] I have tried messing with the settings, disabling the headset, setting the input and output manually to internal speakers while the headset is still plugged in, making sure with GNOME alsa-mixer that the speakers are not muted, rebooting with the headsets in and then unplugging them.
So I just reinstalled OpenSUSE 11.2 and I went from having 20-30 mbps speed to and from my 1 tb usb ntfs external hard drive to having about 1 mbps transfer speeds now. Is there any suggestions for how I can fix this? I know it can go faster, I just need to figure out how. and would setting acpi=off at boot affect this?
Opensuse 11.2 KDE 4.3 64 bit EXT4 main disk NTFS external
Basically I have a machine with 16GB of RAM and have just discovered that using all of it can crash the whole system over one process. How could I run a process on the system in such a way that if more than 90% of system memory is used, the process immediately crashes?
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
Want to make a 1gb volume on dev/sdb usb memory stick. Wrote Code: Select allsudo tcplay --create --device=/dev/sdb --pbkdf-prf=SHA512 --cipher=TWOFISH-256-XTS,AES-256-XTS
Command has to be sudo? Got Code: Select allPassphrase: Repeat passphrase: Summary of actions: - Completely erase *EVERYTHING* on /dev/sdb - Create volume on /dev/sdb
Are you sure you want to proceed? (y/n)
I do not want the usb stick to be erased. What do I do, to not erase the usb stick? If you create a volume on the system hdd, it should not erase the system.
Well, the title pretty much sums it up. Whenever i plug in my external speakers, my laptop speakers continue to put out sound, which is good until i turn up the volume and hear rattling.
I am running ubuntu 9.04 64-bit 2.6.28-13 on an MSi GX620.
I have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
My Toshiba Satellite Pro A200 running Fedora 8 continues to play sound out of the laptop speakers when external speakers are plugged in (and no sound out of the external). What can I do to diagnose/fix this? code...
I recently installed Kubuntu 9.04 Jaunty on my buddy's laptop. It's working alright, except when we try to plug the external computer speakers into the sound jack in the front, there is no change; it keeps playing through the onboard speakers. My friend and I are getting pretty frustrated because we use those speakers to watch movies with, and the onboard speakers aren't sufficient. If I need to provide any other info, let me know and I'll do so.
