I am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
View 8 RepliesI am using Ubuntu 9.10. My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
lspci -v
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: Gateway 2000 Device 0562
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f3010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
[Code]...
I have a Acer Aspire One netbook running Lucid Lynx.Sound quality is fine through my speakers, but when I plug in headphones things go awry. The headphones are working because the speakers mute and I can hear musical instruments playing on the track, but I can't hear any of the voices in the music.It's as if the voices are muted, but I can still hear the guitars, drums, bass, etc. When I unplug the headphones the track plays normally, voices and all, through the speakers.
View 2 Replies View Relatedfirst because of my nvidia card if I don't put nomodeset my screen turns off.also whenever I try to update my nvidia drivers either the ones from the ones from the website or the propriety drivers I get a MCU failure or something like that and to fix that i have to change "nvidia" in my xorg.conf to "nv" but then my resolution loads to 640x480 which i cant change and it says im not using the propriety drivers so then i changed "nv" to "vesa" which makes my screen highest screen resolution 1280x 720 and apparently my refresh rate is 0. but i cant do anything good without the propriety drivers.Also my sound doesn't work at all unless i plug in some headphones.
View 7 Replies View RelatedI`m new to Ubuntu and Linux as all. First of all i have a Dell Inspiron N5010 laptop. I have a very strange problem, after the initial installation of Ubuntu 10.10 there were no problems plugging in my headphones or 2.1 sound system and listening to music. After a couple of days when trying to plug in my 2.1 sound system I noticed that there is no sound coming out of them, but the laptop speakers were working fine. Tested the sound system with another laptop and they worked well. I have checked all the settings and everything seems fine. I`m puzzled. I have the system dual boot with Win 7 if that makes any difference.
View 3 Replies View RelatedI have Ubuntu 9.10. Clean install. I have a cheap headset but can't get sound to come thru the headset. The mic works, but sound only comes from main speakers.
I do not have a HP, SONY or anything like that. I bought my pc barebones and built myself. So there doesn't seem to be any easy fix for my pc. Here are the specs:
Gigabyte MB model# GA-M61SME-S2 code...
I've just installed ubuntu on my new laptop, an Acer Aspire 5745G. I have a couple of problems. Of course I try to google my problems first, but these efforts were fruitless
Problem 1: Sound works perfectly on the laptop speakers, but when I plug in my headphones, I can't hear anything. The laptop speakers go silent, but there is no sound in the headphones. Very annoying.
Problem 2: I have wireless Internet connection, but the wired network connection doesn't seem to work. There is no activity when I connect the computer to the router.
Problem 3: The button for ejecting the CD-tray isn't the regular type I'm used to with laptops I've used before. On this laptop there is a button just above the numpad keyboard area, that's supposed to eject the cd-tray. This doesn't work, but I can eject it using a command in a terminal.
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
On my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
View 1 Replies View RelatedI have a laptop computer running Ubuntu 10.04 LTS. When headphones are inserted into the headphones port, sound continues to come out the internal speakers, and not through the headphones.
This works fine in Windows 7, so the hardware appears to be good. This did work properly when we first installed Ubuntu - it spontaneously stopped working one night, so I'm not sure what we did to make it stop acting normally.
I have run "alsamixer" in the terminal, and toggled every mute and volume bar there is (there are only 4). The laptop is a Toshiba Satellite T135D-S1324.
General information:
uname -a:
Linux ... 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 x86_64 GNU/Linux
[Code].....
I'm running FC 14 on an Alienware m15x-R1. It's an older one that they made before Dell bought them out. My problem is that the internal speakers don't work, but if I plug a headset in to the audio jack, it works fine. lspci tells me I have an audio device Intel Corp HD Audio Controller, which may or may not be helpful. I booted it up with an Ubuntu live CD just to make sure it was the hardware, and I get the same results.
View 1 Replies View RelatedI have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing.From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately? May be it has to do with config files but my linux knowledge is low.
View 3 Replies View RelatedI have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately ? May be it has to do with config files but my linux knowledge is low
View 9 Replies View RelatedIt has happened to my debian jessie system that the sound sometimes ceased to work, but after a quick review of alsamixer, pavucontrol it was easy to put everything back to normal. Not this time
The sound works as a charm with no headphones, but not with them, and I find them particularly useful for talking with people since the sound quality is way better...
I have alsa and pulseaudio installed on my system
uname -a
Linux device 3.14-2-amd64 #1 SMP Debian 3.14.13-2 (2014-07-24) x86_64 GNU/Linux
lspci -v| grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
In pavucontrol everything looks normal, and the output seems to be working...
I have an issue where my laptop speakers work just fine, but when I plug in headphones, I get no noise. I'm using openSUSE 11.4.I found others with the same issue, but this guy's solution looks like he might be using some different version and his solution doesn't work (can't find the file he edited).
View 7 Replies View RelatedI don't get any sound from my left speaker. With my headphones plugged in though I get sound in both speakers. I've upgraded my Kernel to .36. I'm using Ubuntu 10.10. I'm on an MSI A7200 which is a great laptop but apparently a very rare one. There's like no info on it at all on the internet.
View 3 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
when my headphones are plugged into my computer, the sound comes from both the speakers AND the headphones. I just want the sound from the headphones if they are plugged in.
View 7 Replies View RelatedI'm having an issue with my computer and the headphones. When I plug in the headphones into the headphone jack, the sound plays through the headphones but it also plays through the speakers as well at the same time. I've attempted to play around with the sound settings to see if I can get this issue resolved but I have not been able too. Computer specifications are in my signature.
View 3 Replies View RelatedIn ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45118 1
snd_hda_intel 26327 12
[Code].....
I've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn
Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....
Trying out opensuse with gnome.. why ATI drivers works on kde, and doesn't work on Gnome? Fells like theres no installed drivers at all :/
[URL]
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
View 8 Replies View RelatedWhen I connect to my workstation via Real VNC Viewer 4 to Xvnc running on the workstation, and running "su -" I get authentication failure as follows:
So, effectively I cannot su when connected via VNC.
But if I'm at my workstation, I can su just fine:
Nov 18 16:24:30 localhost su: pam_unix(su-l:session): session opened for user root by xyz(uid=500)
Interestingly enough, I cannot su to my own userid over vnc, i.e. su xyz
In /var/log/secure I get:
I suspect it has something to do with PAM, but cannot figure it out.
I have upgraded to Ubuntu 10.04. The upgrading process went fine but i have some problems now. Firstly, in the tray icon space i don't have sound tray icon and the Ubuntu One icon neither. Moreover, the Firestarter doesn't works and says that probably i don't have internet connection though the internet works fine.
View 2 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
I have browser-plugin-gnash installed and I am using Debian Squeeze. In Chromium, I get the message "You need to upgrade your Adobe Flash Player to watch this video." whereas it works in Iceweasel.
View 1 Replies View Relatedthe codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies View Related