Debian Multimedia :: SOUND - Line In Works But Doesn't Appear In Gnome Setup
Jun 4, 2015
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek  67127 1
snd_hda_codec_generic  63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi   45118 1
snd_hda_intel     26327 12
[Code].....
View 1 Replies
ADVERTISEMENT
Mar 30, 2010
I've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn
Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....
View 3 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
Sep 8, 2011
I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
View 1 Replies
View Related
May 4, 2010
Is there a way to control the gnome sound preferences widget via the command line? I use optical digital out (IEC95. It works fine. but everytime I reboot there is no sound, I have to go to sound preferences, hardware tab, select my internal audio device, change it from digital stereo duplex to analog surround 5.1, then back to digital stereo duplex, and then the sound works again. I would like to be able to do this via command line so I can write a little startup script and not have to do that every time i reboot.
View 4 Replies
View Related
May 13, 2015
Updated old Eeepc 1005HAB to Jessie. Used to have a text file:
xrandr --output LVSD1 --mode 1024x600 --fb 1024x768 --panning 1024x768"
that I could run (twice in a row, it needed) to allow the scroling of the screen to see the bottom 1/4.
This no longer works.
View 0 Replies
View Related
Apr 5, 2011
ibus works in a freshly installed wheezy with gnome, but it doesn't work in another system where I use openbox without desktop environment. The ibus-daemon is running and the icon is shown in the panel but the key sequence Ctrl+Space has no effect.
View 4 Replies
View Related
May 27, 2010
Older machine here that I upgraded to 10.04 after a clean install of 9.10 some months ago. When booting into GNOME, the desktop image flashes on the screen and the second the bars on top and bottom try to appear the system boots out of the desktop and returns to the log on screen. I assume this is a crash of Xserver, but just guessing. Per another page I ran: lspci | grep VGAand returned:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
I know - old machine Typing this from failsafe mode, would be great to hear from someone as to what I can do to get this working in normal mode again.
View 1 Replies
View Related
Nov 12, 2015
debian 8 64bit
gnome classical gui
user is dd
psswd is word
adm psswd is adword
unlock crypt psswd is crypto
This is how I start debian. I can choose between debian gnulinux and advanced options. I select debian.
Then 'please unlock crypt' shoIws. I enter 'crypto'.
Then debian gui login screen shows. I enter 'dd' and 'word'.
Debian 8 gnome classical starts.
Can I login to debian 8 gnome classical by entering 'dd' and 'word' in a command line?
I do not want to login by debian gui login screen. But by command line.
If I select advanced options. Then recovery mode, I can get a command line. If I can login there, then I do not know how to.
View 1 Replies
View Related
Jul 26, 2015
Are there any sound schemes for GNOME and MATE? Like different system sounds and a logon-logoff sound and a system sound for when I empty the trash bin? Like the way Ubuntu does, just with different sounds. I'm not that crazy about Ubuntu's system sounds.
I know I don't need it, I think it would just make a nice addition to my laptop and later my desktop.
View 5 Replies
View Related
Sep 7, 2015
After a recent Debian 8 update, I notice a new problem with the Gnome-Terminal. When you open a new tab or window, whatever is the cwd of the current tab becomes the cwd of the new tab or window. This always used to reset to ~, which is what I want. Is this a new "feature" and if I can disable it?
View 3 Replies
View Related
Mar 6, 2010
This problem showed after fresh installation of Debian Testing (image is dated at 1 march 2010). When I want remove cd I click button on device but the icon is still at the desktop and in the nautilus too (in the left sidebar). I have to remove it manualy from nautilus or desktop ( option: eject ). This problem shows with packages like gnome-mount or gnome-volume-manager ot without them.
View 5 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Apr 4, 2011
If I try to change the icon style, it changes the icons in my desktop and in Nautilus, but it doesn't change the icons in the panels nor the ones in the menus.
Some screencaps:
[URL]
View 2 Replies
View Related
Feb 18, 2010
Trying out opensuse with gnome.. why ATI drivers works on kde, and doesn't work on Gnome? Fells like theres no installed drivers at all :/
[URL]
View 3 Replies
View Related
Mar 17, 2010
I am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
View 8 Replies
View Related
Mar 22, 2010
I've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.
My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.
When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.
My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.
View 1 Replies
View Related
Aug 18, 2011
I am looking for a way to programmatically (Python or shell) set up my panels, drawers, app launchers and stuff. Just wondering if there is a way to do that - or a standard approach to it and such.
Am using Gnome - the regular install - no extra components or such. Would it be easier to do it if I was using Gnome 3. Just putting the question out there in case someone is using Gnome 3 and it would be easier to do the automated setup in Gnome 3.
View 4 Replies
View Related
Jun 24, 2011
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies
View Related
May 1, 2010
I have upgraded to Ubuntu 10.04. The upgrading process went fine but i have some problems now. Firstly, in the tray icon space i don't have sound tray icon and the Ubuntu One icon neither. Moreover, the Firestarter doesn't works and says that probably i don't have internet connection though the internet works fine.
View 2 Replies
View Related
Oct 29, 2010
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
View 1 Replies
View Related
May 2, 2011
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
View 1 Replies
View Related
Jul 27, 2010
I recently replaced (fresh install) Fedora 12 by 13. Surprisingly I noticed there is no log-in sound for Gnome and also when I use command line terminal there is no terminal bell in spite of the fact that I checked the "Terminal Bell" option in the EDIT --> Preferences menu! I checked the speakers are not mute, I can play music. Any idea how to fix it?
View 2 Replies
View Related
Sep 18, 2009
I'm running Fedora 11 (same problem on my 32 and 64bit systems), I have Logitech bluetooth mice and keyboards hooked up to both of my systems. Occasionally, one of my keyboards stops responding and I simply open up the Bluetooth Preferences window, delete the keyboard and then set it up again. However, now when I click the Setup New Device button, nothing happens! This is happening on two seperate systems. Am I to believe this is the result of a bad update? I've checked my yum log and it hasen't updated any bluetooth packages for a few weeks now and this just started the other day. Any ideas what could be wrong?
View 1 Replies
View Related
May 9, 2011
Something broke recently on my Fedora 14 system. Up until several weeks ago, the mic worked fine, but now it is no longer recognized.
That is to say, if I tap on the mic, sound comes out of the speakers, so the hardware is working, but it doesn't work under Skupe nor does it show up as an input device under Gnome.
Thinking something may have broke in a recent kernel, I went back to an earlier, but the problem remains (now running 2.6.35.11-83.fc14.x86_64, but I have the following installed).
how to get Skype and Gnome to see my mic again?
Code:
-rwxr-xr-x 1 root root 3784000 Dec 20 22:19 vmlinuz-2.6.35.10-72.fc14.x86_64
-rwxr-xr-x 1 root root 3783872 Dec 23 17:10 vmlinuz-2.6.35.10-74.fc14.x86_64
-rwxr-xr-x 1 root root 3785120 Feb 7 08:21 vmlinuz-2.6.35.11-83.fc14.x86_64
-rwxr-xr-x 1 root root 3789088 Mar 31 23:27 vmlinuz-2.6.35.12-88.fc14.x86_64
[Code]....
View 1 Replies
View Related
Mar 15, 2010
I have no problem playing all videos and sound files. I have installed most codecs and propriety software. I can play all downloaded .flv videos from all the sites except one. When I open the .flv file from this site, I get "internal data stream error."
View 2 Replies
View Related
Mar 24, 2010
I have Ubuntu 9.10. Clean install. I have a cheap headset but can't get sound to come thru the headset. The mic works, but sound only comes from main speakers.
I do not have a HP, SONY or anything like that. I bought my pc barebones and built myself. So there doesn't seem to be any easy fix for my pc. Here are the specs:
Gigabyte MB model# GA-M61SME-S2 code...
View 9 Replies
View Related
Jul 8, 2010
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
View 7 Replies
View Related
Jan 8, 2011
I have a Zotac Mag Atom computer with Nvidia ION graphics. This computer i use as a HTPC hooked up to my 42" LG flatscreen via HDMI. The problem i have is that after have installed de correct graphics drivers the graphics chip only sends picture over HDMI whilst there allso is going sound.
View 2 Replies
View Related
May 9, 2011
I have a problem with these new earphones I've got.
When I play music in Banshee, I can only hear the instruments and barely the voices.
However, when I play the same files in VLC, I can hear everything 100%.
Can anyone explain what is going on?
View 6 Replies
View Related
