I have upgraded to Ubuntu 10.04. The upgrading process went fine but i have some problems now. Firstly, in the tray icon space i don't have sound tray icon and the Ubuntu One icon neither. Moreover, the Firestarter doesn't works and says that probably i don't have internet connection though the internet works fine.
View 2 RepliesI have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
Whenever I click minimize in rhythm box, it just goes to its own box in the bottom bar like most programs. But when i click the X while music is playing, it keeps playing, but it just disappears. The sound button has no options other than volume, and the only way to bring rhythmbox back up is starting it back up. Why doesn't it minimize to the sound button like its supposed to?
View 8 Replies View RelatedI have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
It always shows a same icon, for every application which shows message tray icon. I just did some shell extension work after fresh installation of F15, nothing related on message tray. Don't know how to change it back.Dose anyone knows how to customize message tray icon for gnome-shell?
View 2 Replies View RelatedI am using Ubuntu 9.10..My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
View 8 Replies View RelatedI've Ubuntu 9.10 with 2.6.31-20 kernel.Sound kernel module is loaded, but doesn't works ;((. I have not got any errors and all programs (e.g. mplayer) thinks that sound driver is present and works OK but I can't hear a sound...A part from lspci -vvnn
Code:
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be3] (rev a1)
Subsystem: Sony Corporation Device [104d:9067]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-[code]....
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45118 1
snd_hda_intel 26327 12
[Code].....
I have Ubuntu 10.04 installed on a laptop of mine, and also a desktop. On this laptop, it's a clean install and I'm having a weird issue with the panel on the top of thescreen.ometimes when I start up the computer and login, I get two noticeable quirks. Instead of having the wireless icon in the tray next to the volume, I have two volume controls next to each other.The one icon, that takes place of the wireless icon, is not functional.The other volume icon functions as normal.
The other quirk is that my power button, used for choosing to logout, shutdown,etc,isappears. Instead, it shows two of my username next to each other (one is the legitimate one that lets you set your away status and such). And in place of the power button, is another username menu, but it is cut off by the edge of the screen and doesn't function.Has anybody had this problem before? Is there some kind of package I can update or reinstall to try fixing this? Sometimes the power button will be fine, but the volume icon will still double up.
I accidentally removed the mail tray icon (tha onle that looks like an envelope) and i haven't found how to put it back. Does anyone know how to? I haven't been able to find how.
View 2 Replies View RelatedWhen I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Code:
Ive searched all over on where the tray icon is. Id like to change it on my system to the RTM cow icon. Anyone know where the tasque icon for the tray might reside?
View 4 Replies View RelatedI'm here to ask if it is possible to change the tray icon for skype. It looks bad next to the rest of the tray icons.on this?Oh PS: the page I was looking at didn't have any solution to my problem
View 3 Replies View RelatedIs anyone else getting a non-transparent icon in the system tray when TrueCrypt 6.3a loads on Ubuntu 10.04 with the default theme? Annoying white bars on the top and bottom of the icon. This didn't occur with the same version of TrueCrypt on previous versions of Ubuntu. Any way to resolve it? It looks out of place...
View 5 Replies View RelatedI have done a fair bit of Googling first but with no success...I am using PS3Media server to stream audio, video etc to my PlayStation. It works very well indeed on the PS3 end, but I have a slight annoyance that is messing with the nice look and feel of my Ubuntu desktop: The PS3 Media Server icon seems to have a grey background, whereas my panels all have dark transparency, this makes it stand out a mile.Is there any way of altering this icon? I was looking in the ..../pms-linux-1.10.5 folder but couldn't find much there.
View 2 Replies View RelatedI'm using Parcellite right now since whenever I copy something from Firefox and close it before pasting, whatever I copied is gone. Parcellite fixes this, but I don't want it to be on my tray all the time. How can I hide it?
View 2 Replies View RelatedI'm using Ubuntu Lucid 64bit. Thunderbird 2 had an add-on for new mail icon notification in the tray, but I haven't yet found a working replacement for Thunderbird 3.
View 9 Replies View RelatedI installed Skype only because it is necessary to Pidgin to handle the Skype service/protocol. I use Pidgin for many protocols included the IRC, so I don't need Skype icon in the system tray at all. Honestly I hate Skype, but unfortunately it seems that all the world use it. how to take off that terrible icon/indicator/applet from the systray. I searched in all system to find a configuration file, I opened few named Skype using vi to avoid to damage them, but I have not found nothing interesting for my scope. PS: don't tell me how I will switch on or off Skype, because a plug-in of Pidgin do it w/o user interaction.
View 3 Replies View RelatedUbuntu 10.10, fairly fresh install. The order of the icons in the system tray changes each time I reboot. It's worked fine since install a few weeks ago until today when I booted and the wireless wouldn't connect. I rebooted and they came up in a different order so I rebooted again and the order changed yet again. Maybe I should just keep rebooting until I find an order I'm happy with then never switch my machine off.I've attached a printscreen to show what I mean.
View 9 Replies View RelatedI'm on Ubuntu 10.04 Lucid. I need to find the icon image files used by the Gnome panel tray apps, specifically, Banshee (see attached screenshot). It's not in /usr/share/pixmaps, as that banshee icon is used for the panflute launch button, not the Banshee tray icon. I imagine it would be where all the other tray icons are (volume, battery, etc). I'm looking for it so I can try editing it to fix the white background.
View 2 Replies View RelatedI use Team Viewer a lot. In Windows, if you have it set to start with Windows, it starts with only an icon in the tray. On my daughters Acer netbook running Edubuntu Natty, when I set it to start with the computer it opens the full program. My question is how do I set it so it still starts but without being intrusive? Hidden...
View 2 Replies View RelatedI have probllem with Insync (google drive synchronisation).I instaled insync and insync-nautilus, synchronisation was started, but I haven't icon in tray ( upper right corner of the screen ).My system that Debian 8.3 32Bit.
View 1 Replies View RelatedI have a multi-platform QT4 application and I'm trying to make it run on Debian 7.x. In this app I'm creating 2 QSystemTrayIcon 's and when I run this application on Debian 7.8 with Gnome 3 disabled both tray icons show up nicely in the notification area in the top-right panel. However when I have Gnome 3 enabled nothing shows up in the top-right panel and the tray icon shows up in the (hidden) bottom panel, but the problem is only the first one of my 2 tray icons shows up - the other one is lost.
I'd like to ask, whether it is by design so, that on Gnome 3+Debian 7.8 there can be only one tray icon per application? Or is it some issue with Qt? I tried also Ubuntu 14.04 with Gnome 3 and there both tray icons showed up nicely in the top-right panel.
There doesn`t seem to be a tray icon for Rhythmbox. The only way to minimize it seems to be to the taskbar. I have used Rhythmbox. I am using a fully updated Debian Testing with Rhythmbox 0.12.3.
View 9 Replies View RelatedI'm searching for a tool that can show current keyboard layout in GNOME tray panel. As I reminded there was such tool for KDE, but at this time I'm using GNOME and it's a really problem to find such stuff. Is there any tool for GNOME (showing keyboard layout tray icon) like in KDE?
View 2 Replies View RelatedJust updated to KDE 4.5.1, and im having a hard time getting the tray icons to work.
For instance, i cant get the Pidgin tray icon to show. I cant get Qinternet to show either.
I am trying to find a way to put an icon in the system tray and run a bash command every time I click on the icon.
Purpose: I want to set up a system tray icon that will hide/unhide the desktop when clicked, much as would the standard desktop panel plugin for the various panel apps like lxpanel, gnome panel, etc.
Why don't I just use a panel app?
I am using a very reduced install of Ubuntu Lucid oriented towards first time PC users on very old hardware, using Openbox as the window manager and Tint2 with lxlauncher instead of a panel, the latter both compiled from latest source for some slight customization. Tint2 is a taskbar that also features a built in clock applet and system tray which I have chosen after examining basically all other alternatives and chosen for its light footprint and customization. It gives me everything I need except a single click hide/show-desktop feature or a halt/reboot/logout menu. lxlauncher is a very lightweight alternative to the Ubuntu Netbook Remix netbook-launcher (and/or netbook-launcher-efl) package that conforms to the freedesk specifications and occupies all free deskspace other than tint2, under all other windows. I used the freedesk specs to set up a "shutdown" menu category and created shutdown.desktop reboot.desktop and logout.desktop files in the category to add that feature, using dbus commands for the first two and 'openbox --exit' for the latter.
I set the openbox config to open all app windows maximized with no decoration, so each app takes up the whole screen other than tint2 and can only be closed by right clicking on its icon in tint2 or by its file->Quit menu.
This gives me a kind of OLPC for grown ups with no computer experience. In other words, for people who don't know what a desktop or window is. This is similar to the Ubuntu Netbook Remix except that in UNR they superimpose the window decorations over the gnome panel so you can still close the window.
However, the one problem here is that to see lxlauncher when one has several apps running, one has to click on each app in tint2 to minimize it. I would like to add a system tray icon to make this possible with one click without adding too much more overhead to the existing setup.
Here is a screen cap of the desktop:
BTW, I will use wmctrl to test the desktop visibility state and toggle it using this bash command: test 'wmctrl -m | grep ON' && wmctrl -k on || wmctrl -k off
how to get an icon in the system tray and run the above command when clicked will be appreciated
P.S. I've looked at 'zenity --notification --listen' but running a command when the icon is clicked in this case is a pending feature for the app and not yet implemented. My last resort will be to learn C and try that.
Well, I had recently removed every single file regarding banshee, and when I reinstalled it, the tray icon turned into this (I pressume I removed the tray icon as well and it didn't "return after" reinstalling banshee): How can I fix this and bring the tray icon back? I've tried reinstalling it, even installing newer (sometimes unstable) versions, and it didn't work.
View 3 Replies View RelatedIn the XP version of Thunderbird, a try icon appears when new mail arrives. I noticed in the Linux version I don't get the tray icon. Is there anyway of getting it to show or is it not available in the Linux version?
View 6 Replies View Related