Debian Multimedia :: VLC Video Playback Random Freezing
Jul 17, 2010
When I play videos in VLC, the video output seems to randomly freeze while playing the video. This does not effect the audio though. The audio output continues, but with the video frozen on a frame. This is happening in windowed and full-screen mode. I have to use "pkill vlc" each time twice then start VLC again. I have had to resort to mplayer for the time being. I am running squeeze. I was not experiencing this problem before though (started within the past week), so it must be due to some recent upgrade. I have tried "aptitude purge vlc && aptitude install vlc", but I am still experiencing the same problem.
View 1 Replies
ADVERTISEMENT
Jun 11, 2010
I have to say I'm really enjoying it. However, when I have been watching videos on ..... and revision3.com after a random amount of time the computer will freeze up and I have to do a hard restart of the computer.I've gone through the multimedia sticky post at the top of these forums with no real luck.Oh just got the computer today as a real budget system.AMD Athlon II X3 435 2.9ghzMSI K9N2GM-FD AM2+on board NVIDIA Geforce 82004GB DDR2 memoryI'm using ubuntu 10.04 64bit version.
View 4 Replies
View Related
May 1, 2015
I'm using Gnome as my desktop environment in Debian stable, I have previously address this issue at another post with the solution of setting xset command to disable screen blanking. However I'm still looking for a method that can automatically disable screen fade while watching videos in a browser. I don't want to permanently disable the powersaving idle method. I have both cpufreqd and laptop-mode-tools to conserve my powers.
View 2 Replies
View Related
Jul 31, 2011
A relative of mine who uses Debian 6.0.2 has bought a Samsung HMX-H300 Camcorder which records videos in:
1. H.264 (MPEG4 part10/AVC) format
2. High Definition Video (HD-VIDEO)
3. Standard Definition Video.
I notice that the PC requirement for the camcorder's bundled software, apart from the usual Windows XP SP2/Vista/Windows 7, lists an Intel Core Duo 1.66 minimum CPU and an NVIDIA GeForce 8500 or higher or ATI HD 2600 series or higher.
My relative has an old Intel(R) Celeron(R) CPU 2.30GHz computer which only has an AGP GeForce FX 5200 but after copying the videos from the Memory Card to /home it is just about possible to play them using Totem Movie Player and VLC but, although the audio is OK the video is painfully slow or almost stationary.
Is there a way to view the videos recorded in these formats with this hardware? Can they be converted to another format? Or should he consider buying a better computer?
View 2 Replies
View Related
Aug 7, 2011
i'm using debian wheezy and whenever i'm playing a webm video, typically on videos, totem and mplayer can't play video. the video just freezes. (i assume because they both use gstreamer.) when i try to use vlc when those 2 aren't working, the video does play but there is no sound.
View 3 Replies
View Related
Jan 27, 2011
When I start Audacious and make it play music, after a random time the player
freezes up and the music stops playing. I have to make Audacious force quit and restart it, then it works for some time again. When I play a ..... video (in Firefox), it plays fine for some time and then it loses sound and either continues playing silent or the video stops and doesn't start again until I reload the page.
I use kernel 2.6.31-11-rt and the soundcard is...
product: AC'97 Sound Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.7
[Code]......
View 1 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Jan 5, 2010
I'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
View 6 Replies
View Related
Oct 23, 2010
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
View 2 Replies
View Related
Apr 8, 2011
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
View 9 Replies
View Related
May 18, 2011
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies
View Related
Nov 6, 2010
Whenever i wanna watch a video on any site like ....., hulu, or cbs, the video watches fine in the normal minimized view. But when
i turn on fullscreen the video plays for a couple minutes, or seconds, and then freezes for about half a minute, but the sound continues.
View 1 Replies
View Related
Mar 14, 2010
I just finished trying to install the codecs for various audio/video playback (Restricted Formats/11.2 - openSUSE - Community) and now I can play flash, mp3s and such but most of the video playback is very jittery and is not watchable. I have now tried it with mplayer and kaffine but still the same. I had this problem before as well and even tried VLC but no luck. I had thought I could just add the Nvidia repository and type in my graphics card, install and be done with it but no such luck (nothing even comes up when I type geforce).
View 4 Replies
View Related
Apr 3, 2011
Whenever I play a video via vlc or kaffeine and I switch to full screen I get lag. If I move my mouse to show the controls it plays perfectly. How can I fix my full screen playback issues?
View 9 Replies
View Related
Jan 15, 2010
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
View 2 Replies
View Related
Feb 21, 2010
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
View 7 Replies
View Related
Apr 3, 2010
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
View 1 Replies
View Related
Apr 26, 2010
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
View 1 Replies
View Related
May 14, 2010
I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
View 3 Replies
View Related
May 26, 2010
Im running Xubuntu 9.10 on my compaq v2000 laptop. My problem is that the video stream playback is very choppy. I have tried the method found here [url] but when i get to the part where I have to type "echo base....." when i hit enter my terminal replies with "bash: echo: write error: Invalid argument"...How to fix this choppy video streaming playback...
View 1 Replies
View Related
Sep 30, 2010
I have an Nvidia 8600 GTS 256 MB installed--
Is there a problem with my video driver? Codecs?
View 1 Replies
View Related
Jan 2, 2011
after a recent foray into Ubuntu. Every day is a school day at the moment, so please be gentle! I recently obtained an old IBM Thinkpad T41 which I've made dual boot Windows XP and Ubuntu (windows was my backup option - it's installed but with none of the drivers; thankfully I've not yet hit a problem Ubuntu can't handle!) and which is connected up to the TV in our lounge. I have installed XBMC on it, and we're currently enjoying having access to all sorts of multi-media and iPlayer in the lounge. The thinkpad connects to our home network wirelessly, using the Thinkpad's built in wireless hardware - providing a whopping 11Mbps connection. Our media is all stored on NAS on the network, and I thought that even full 54Mbps wireless would not be fast enough to stream videos smoothly onto another machine.
However we have two windows laptops (one windows 7, one windows xp) which have 54Mbps connections and they can stream the videos smoothly from the NAS, so clearly I was wrong (wer'e not talking High def or blue ray rips here or anything). So my first question. Does anyone have an recommendations of a 54Mbps wireless card (PCMCIA preferably) that is compatible with both Ubuntu and the Thinkpad so that I can improve it's connection speed to the network? I have a "Max Value" branded card in the windows xp laptop (bought cheaply from Amazon) that I tried to but failed miserably to get working in the Thinkpad with Ubuntu last night. All hints and tips welcome....
Second question: Improving video playback on the thinkpad. Some of the videos were a bit choppy, which I thought was just to do with video quality. However having been playing them on the windows xp laptop - Sony Vaio PCG-FR215S, so similar in age and processor speed to the thinkpad - they play absolutely perfectly. So what are my options for improving the video playback on the Thinkpad running Ubuntu? - Upgrade memory to 1GB from 512MB? Will this make much difference? The sony has been upgraded to 1GB, which is why I ask the question. Do I have any options on the dedicated graphics processing hardware front? I'm guessing they are severely restricted as it's a laptop, but thought I'd ask as obviously I'd only be interested in something that is supported by Ubuntu.
Nvidia acceleration is enabled in Ubuntu, and in XBMC. The playback quality in XBMC is comparable with using VLC so I don't think there is anything XBMC specific to be concerned with at the moment.
View 7 Replies
View Related
Feb 10, 2011
I just upgraded to Ubuntu Maverick v 10.10 and loving it. However, I have encountered a problem with playing any type of video whether it be Xvid, AVI, h264, MKV or AAC. I have tried many players from smplayer, mplayer, kmplayer, vlc, etc. but I am still having the problems. I have read some posts on here and I've disabled compiz, tried the X11 tweak and updated my Nvidia drivers. I don't know if I am missing some type of codec or restricted plugin because I have ample space and resources are readily available while playing the video.
View 2 Replies
View Related
Mar 4, 2011
After working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.
Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)
View 6 Replies
View Related
Apr 29, 2011
i just updated to 11.04 and now my system logs out every time i play a video file.
View 9 Replies
View Related
May 20, 2011
I recently upgraded from 10.04-11.04 using the 11.04 CD I don't use any effects, I log on the sessions using Ubuntu classic (no effects). Whenever I try to play a video, the gdm restarts and puts me back at the login screen. I installed vlc thinking it might help but no deal.
*edit* I tried all different types of video outputs in vlc, the default seems to work the best, but as soon as I click the vlc window, try to resize it, or access any menu on vlc or try to fullscreen the video gdm crashes and restarts.
View 3 Replies
View Related
Dec 7, 2009
I am running openSUSE 11.1 on a Pentium Dual Core 2.5 (E5200) Processor, 2GB RAM and an NVidia 8400GS PCI Express display card.When I intitially installed my system I also installed VLC media player, at that time it was version 1.0.1, Mplayer and SMplayer a few codecs for K3B, handbrake for DVD ripping etc. That was also the only time since my computer has been online, i have never updated it since. And it had no problems whatsoever. Among other things I use my system to watch DVD's. I watched many DVD's and video clips flawlessly.
Now all of a sudden when watching DVD's and video clips the DVD playback flickkers red (the color red). I am not sure what causes it and it is very irritating. It flickkers even more with video clips. With a DVD it dissappears after a while but as soon as you move your mouse pointer or click on the screen it starts to flickker red again.I thought it was my NVidia card that might be faulty, but I booted up from a Puppy linux live-cd and I played a DVD from there and it works 100%.
View 5 Replies
View Related
Jan 25, 2010
Installed clean new 11.2-32 bit. Followed the restricted formats post. Kaffeine, vlc, and Mplayer present a blue screen with sound or shutdown immediately. Recommended diagnostic steps as follows:-
linux-yeq6:/home/ingrid # LC_ALL=C zypper ve
Retrieving repository 'Updates for openSUSE 11.2-0' metadata [done]
Building repository 'Updates for openSUSE 11.2-0' cache [done]
Loading repository data...
Reading installed packages...
Dependencies of all installed packages are satisfied.
code....
View 2 Replies
View Related
