Ubuntu Multimedia :: Use Sound Card At The Same Time As Front Audio Jacks?
Jan 29, 2010
with my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
View 1 Replies
ADVERTISEMENT
Jan 4, 2011
I run Ubuntu 10.10 on my Intel DG965RY. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227
My ALSA information is here.
Handy details:
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.23
Utilities version: 1.0.23
[Code].....
I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed).
View 9 Replies
View Related
Jul 3, 2011
I just installed 10.10) i had speaker audio on my laptop but the front jacks for head phones didn't work. After fidiling with some config files, i forget which config thing it is in but there was numerous mentions about where you had to put "options I am already added to the audio group for my computer and running vlc as root does not work (vlc-wrapper) regular won't run as root, i tried that because i have fixed other hardware problems by running programs as root. The laptop is a HP Pavillion dv5-1000 and has a regular sound card and a hdmi port (the sound is configured to play out of the non hdmi one)
View 1 Replies
View Related
Mar 16, 2011
I have openSUSE 11.4 KDE version (64-bit) on a desktop PC. My sound card is ASUS Xonar DX 7.1 (PCI-E). I am brand-new to the Linux experience. I get audio out to my speakers which are connected to the jacks of the rear I/O panel of my PC. I do not however get audio out to my headphones which are connected to the jack in the front panel. I know that the headphones work fine because they do so when I boot up in Windows XP. Here is what I discovered so far: KMix does not show that I have a front panel audio channel. But when I run AlsaMixer it does show that I have such channel and, upon manually turning the volume on, I do have sound out to the headphones.
Therefore, I deduct that I have some sort of configuration problem with KMix and would like to fix it as I prefer to use the GUI interface instead of the AlsaMixer one. It's just a matter of preference! I would like to troubleshoot things using the Audio Troubleshooting guide (SDB:Audio troubleshooting - openSUSE) but I notice that openSUSE's version 11.4 is not mentioned in it. Should I follow the instructions for version 11.3 or wait for an updated guide?
View 2 Replies
View Related
Aug 2, 2011
I have a laptop with 2 headphone jacks. Can I have different things come from each one?
View 3 Replies
View Related
Jun 22, 2011
Strange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
View 2 Replies
View Related
Nov 10, 2010
I just got my new Shuttle SG41J1 v2. Everything works fine under 10.10 except audio. I can hear sound at the headphone-jack on the frontpanel but the jack on the rear isn't working. I tried different models in /etc/modprobe.d/alsa-base.conf (3stack, 5stack, test), nothing helped. All channels in alsamixer are unmuted and the sliders turned up. In the output of alsa-info.sh I can see Nodes for all jacks (Speaker, Mic and Line-In at Ext-Rear for example) but alsamixer and all other mixer-applications I tried shows only Master, PCM, Front Mic, Line, Mic and Aux (all in the Playback section). Also I found nothing in /usr/ share/doc/ alsa-base/driver/HD-Audio-Models.txt.gz about my Codec "IDT ID 76c1".
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Jan 20, 2010
I have an Creative Labs CA0106 Soundblaster and all I hear is static I cant seem to find anyway to get it to work. I'm new to ubuntu.
View 1 Replies
View Related
Nov 11, 2010
I can't seem to get my computer to record the audio from an application... Sound Recorder, Audacity, and outRec all output files but they are just silence, even though when I see them in a media player they show the visualizations. I have followed a couple guides to no avail.
View 4 Replies
View Related
Sep 24, 2010
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
View 2 Replies
View Related
Sep 26, 2010
I posted my question on Linx.com, but have not received an answer after 75 viewers to my question:
Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up!
In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
View 3 Replies
View Related
Feb 17, 2010
I spent over an hour today and over an hour last night googling and trying everything and so far no success. I found many threads with oddly similar complaints, but their solutions haven't worked for me.Last week I upgraded my system, basically a complete overhaul (in the old case). The new system is based on an ASUS MB which comes with VIA VT1708B audio onboard. I installed the latest 32-bit Linux Mint on it. The case's front audio jack doesn't work, the rear audio works but is too quiet.
Things I have tried that have not worked:Different combinations of settings in the basic sound preferences dialog, the GNOME ALSA mixer, and the PulseAudio volume control (I've probably played around with these so much that I've tried every combination)
View 8 Replies
View Related
May 10, 2010
I encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
[Code].....
View 9 Replies
View Related
Jul 18, 2010
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies
View Related
May 23, 2010
Getting sound out of the back ports just fine. Using an ASUS P5N73-AM motherboard and a fresh install of 10.04. Everything else works perfectly except the blasted front panel headphone port.
View 5 Replies
View Related
Dec 19, 2010
We tried to burn an audio cd with the default burner in Ubuntu, but we can only play the cd on the computer. I was not in front of the computer, another user was, but I think they used Audio CD Extractor )
View 4 Replies
View Related
Jul 5, 2011
After a recent hardware upgrade, I'm no longer able to use the front panel audio ports on my Antec P180 case. They worked fine before with my old ASUS motherboard, but with my new MSI 870-G45 motherboard I can't get them to work for some reason.
I checked out this thread, [URL] but didn't see much in the way of problems/solutions with front panel audio ports, but it's a lengthy thread so maybe I missed it.
View 9 Replies
View Related
Apr 20, 2011
now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies
View Related
Oct 21, 2010
I lost front audio after alsa upgrade to 1.0.23 headphone and mic doesn't work anymore . Anybody out there who can help a newbee.
HDA-Intel - HDA ATI SB VIA VT1708S ALSA Information Script v 0.4.59.doc
ALSA Information Script .doc
View 1 Replies
View Related
Nov 4, 2010
Basically as the title suggests. I'm a linux noob, I've spent a few hour's looking around, but all I seem to be finding is people with problems of no sound, and so I dont know if the solution would be the same.
I have perfect sound from the rear speakers, the front centre, and the sub, but the front left and right are completely silent.
Things I think anyone may need to know
Mobo - GA-880GM-UD2H
Onboard sound - SBx00 Azalia Intel HDA
Ubuntu 10.10 x64
View 7 Replies
View Related
Feb 3, 2011
I recently bought an HP Pavilion Elite HPE-570t. Except for the fact that I can't get the back speaker jack to work, Maverick works great. Here's info that seems relevant:
aplay -l
card 0: PCH [HDA Intel PCH], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
I've look at Alsa Mixer. There are two tabs (IDT ID 76c7 and ATI R6xx HDMI). I turned the second one off, since I don't have any HDMI sound output device connected to the computer. On the other tab, there are five sliders (Master, PCM, Front Mi, Line and Mic). They are all turned on, and the first two are at maximum volume.
It seems to me that Ubuntu is not recognizing whatever controls the rear speaker jack.
View 1 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
Jan 10, 2011
How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies
View Related
Nov 21, 2009
I'm setting up a new PC and hope to use the Planet CCRMA packages for some simple home recording projects. The PC has a 64-bit processor, so I've installed the x86_64 version of Fedora 10. I've done the basic steps of adding the Planet CCRMA repositories and installed their real time kernel, so I'm think I'm ready to try and get started. First, I need to get my sound cards set up right. I have an M-Audio Delta 1010LT card, which I'd like to use for working with music and the Intel HDA card built in to the motherboard, which I'd be happy to use for things like system notifications and other incidental sounds. Here is what the system tells me about the cards:
[code].....
The only ones that produce any sounds when I test them are the HDA Analog device and the Delta 1010 device, but the weird thing is that output seems to be coming out of the built-in output jack (on the motherboard) in either case. Does the OS route output from the Delta 1010 through the built-in card to its output jack? Also, I've connected only the first two RCA analog outputs from the Delta 1010 to my desktop speaker system - should I use a different pair of outputs for testing? Playing a CD directly from the CD drive works, but playing music files from Amarok does not. I'll leave it at that for now. I posted the information above to the Planet CCRMA mailing list threee days ago, but I haven't gotten any responses.
View 1 Replies
View Related
Aug 26, 2011
My headphone jacks, both of them, do not work. When I plug headphones into either of them, the speakers cut out but no sound comes into the headphones.They work fine with my G1 phone so I know they aren't the problem. I had a different issue and was running 2.32.5blah-blah for a while and thought that was the problem.I'm on unstable -- if someone can tell me how to emit my kernel version I can c/p it into here but I'm a n00b. It's 3.0.something (remembered from the grub menu).
View 6 Replies
View Related
Feb 18, 2011
I have an Ubuntu machine, with an on-board sound card. One of those with about 5 output jacks (green, blue, red, black, pink). As far as I know, there are defaults as to what goes where, like black=center, red=line-in, etc.
How can I change what goes where? let's try the easy case, that all play the same output or that it's stereo and red=right blue=left?
I was reading a bit and was hoping it was something to do with .asoundrc, but got lost there
aplay -l output:
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code]....
View 1 Replies
View Related
Oct 5, 2010
I run a Dell Latitude D520 with an Ubuntu 9.10/Windows XPpro dual boot. My soundcard is a SigmaTel stac9200. Recently,I was experiencing problems with no audio on random start-ups, but after attempts at troubleshooting that problem, I now have absolutely no audio. Could anyone help me troubleshoot this correctly?I feel as though I might do damage to my system if I keep trying solutions from outdated forums. I also don't have an incredible amount of experience with this.Is there a way to just wipe my audio drivers and reinstall them? Also, please understand that I'm a rookie, and I'm sorry if this question has been asked somewhere else before.
View 1 Replies
View Related
Feb 3, 2011
I've got no sounds from my audio card. I have established this knowledge by confirming it by using two separate sets of speakers. In addition, there is a weird muted icon in the top left corner. I've looked through the sound settings, including alsamixer, and I cannot find whats muted. Please see attached screenshot. As you can see, my output it muted, but the speaker is back (see a) in screenshot), not white like it normally is (see b) in screenshot). How to restore sound from my audio ports?
View 3 Replies
View Related
Sep 14, 2010
I recently got Ubuntu running on my iMac 20" version 9,1. In the beginning Ubuntu recognized my ALC889A sound card yet I couldn't get my audio to work, however it worked with headphones. Then trying to fix this I updated my kernel and rebooted. Now Ubuntu doesn't even recognize my sound card and I don't get audio on my computer.
View 2 Replies
View Related
