Ubuntu Multimedia :: Soundcard Delta 1010LT Not Initialized?
Oct 14, 2010
I'm not too experienced on Ubuntu, but I'm trying to get a Delta 1010LT working on Ubuntu 10.04 minimal install (no gnome, only console).I can see the board detected using lspci, but looking at dmesg output I get the following:
Code:
[ 31.116668] ICE1712 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 31.116709] ice1712: Using board model M Audio Delta 1010LT
[ 31.135560] invalid CS8427 signature 0x0: let me try again...
[code].....
if a change the model to delta1010 the driver is loaded correctly, but I assume there are major differences between the two boards so I don't get audio out, even if I unmute everything using alsamixer.Motherboard is an Intel D510MO with onboard audio disabled.
View 1 Replies
ADVERTISEMENT
May 2, 2010
I'm pretty much an Ubuntu noob and I'm about to give up. I've spent hours reading tips and tricks to get this sound card working but I usually end up making things worse. This will be my last attempt
- onboard sound is disabled in BIOS
- Delta 1010LT is recognized
- fresh Ubuntu 10.04 32bit install . . . everything is default.
- I know how to access the terminal and for argument's sake, let's say that's it. I need step by step.
I tried to remove all instances of pulse audio in the past and it removed the desktop as well. Talk about frustrating. Ok, so here I am. Fresh install, no sound and I haven't touched a thing.
View 9 Replies
View Related
Apr 4, 2010
I'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.
View 1 Replies
View Related
Sep 11, 2010
ive been making the switch over to ubuntu from Vista and one of the last things in my way is getting my M-audio 1010lt card working in ubuntu (9.10, 64bit). I set it up so that the maudio card is the primary card and in envy24control the digital mixer shows sound, and i turn up all of the sliders (and unmute) but nothing happens noise wise.
I went into the "sound preferences" gui and was able to disable the internal sound card. It lists: ICE1712 [envy24] PCI Multi-Channel I/O Controller 1 output/ 1 input the top part is fine, but the 1 in/out is wrong. I should have access to 10in/out. Additionally, in the "settings for the selected device" drop down menu, there is no choice to select analog stereo to analog outs 1/2. How can i get the analog output in this drop down menu or find some other way to get sound working??
View 1 Replies
View Related
Jan 6, 2010
I have a new 16GB nano ipod, and I "initialized" it in Rhythmbox. I added about 6GB of music into it (via Rhythmbox).When I eject and disconnect the ipod, it tells me that 6GB are occupied, but the music directory says that it's empty. Does the ipod need to be "initialized" in itunes? I have another ipod that was first used in itunes and it never gave me any issues with Rhythmbox.I have two machines running Ubuntu 9.10. I can't get itunes working with wine, and I don't have a mac or a windows machine.
View 2 Replies
View Related
May 27, 2011
How can I get pulse audio to see my M Audio1010LT sound card. No problem with Ardour and Hydrogen with my sound card but there is no sound for my films and music. Don't know what to do...My OS is Ubuntu 11.04.
View 1 Replies
View Related
May 10, 2010
I encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
[Code].....
View 9 Replies
View Related
Mar 28, 2010
An application I am trying to get going on 9.10 takes over my soundcard whenever I run it. I hear a small pop from the speakers and then no application can play sound after that.
The program is: springlobby
My soundcard is: Onboard sound (Asus M4N68T-M motherboard)
I have posted on the application's forum but it seems most of the posters are developers and the advice goes a bit over my head.
Quote: old versions of SL uses SDL audio to access the sound card, make sure SDL audio is set to use alsa+dmix or pulseaudio, if it's set to OSS or alsa with direct card access, it will lock the sound card
if it's a recent version, everything i said applies instead for openal.I have removed pulseaudio but this is not the cause of my problem as it was the same before removal.full thread is here: http:[url]....
View 1 Replies
View Related
Sep 19, 2010
I just installed the Yamaha WF192XG soundcard into my computer, connected the MIDI keyboard (Evolution MK-7) and I got the "...is running in low-graphics mode". Rebooted, still got the message.. Entered the nvidia-x-config thing (or whatever the command is) and rebooted. Still got the same message
View 2 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Mar 2, 2010
Till around three hours back, sound was there. After restarting the computer, there was no sound. I checked the sound pref. Nothing was mute. The sound icon showed:
Output 48%
-19.13dB, Dummy Output
View 5 Replies
View Related
Jun 6, 2010
I have a Sony Vaio VPCEB1E0E and this is the soundcard it came with -
Codec: Realtek ALC269
Codec: Intel G45 DEVIBX
**** List of PLAYBACK Hardware Devices ****
[code]...
View 3 Replies
View Related
Nov 17, 2010
I have a laptop and a desktop computer. The thing is, I would like to see movies on the laptop from the stationarys hard drive to watch movies and also listen to music (Spotify) from speakers that are connected to the desktop but I don't really know how to solve it.
I know it's possible to make a network sound card on the staionary but I can't get it to work. I hav'e followed this guide but then I can't find the network sound card on the laptop. [url]
View 2 Replies
View Related
Jul 25, 2011
I was, untill very recently, using ubuntu 10.10, and have just upgraded. In Ubuntu 10.10, I was easily able to record sound from my sound card in audacity. For whatever reason, since upgrading I have been unable to do so. I have no problem recording sound from my laptop's microphone, but can't seem to find an option to record from the sound card. I believe it's the same version of Audacity, so all I can assume is that it's an Ubuntu issue.
View 1 Replies
View Related
Apr 5, 2010
Karmic 9.10
Asus F6J laptop
Previously I have had no problems with sound. After the installation of gnome-network-admin package, my soundcard was no longer autodetected on startup. I have since removed the package but the problem remains. After boot-up in 'Sound Preferences' > 'Hardware' there is nothing shown. In > 'Output' it shows 'Dummy Output' . I can regain the sound by using
[Code]....
View 1 Replies
View Related
May 28, 2010
I have an MSI S420 with a realtek alc883 onboard. I upgraded from ubutu 8.04 to 10.4 recently, The sound worked in 8.04 although the mic did't work and the same thing in 8.10 (i went through all upgrades) it stopped working at all in 9.04 onwards.
If i did Lspci -v it did say the name of my card, ( I unmuted all in alsamixer and got the codecs but even a test soud won't work) I also dowloaded a driver from Realtek itself, that didn't work.
Then I edited alsabace.conf some more. I tried every one that could possily be it at [URL] including all that said MSI.
I then tried Lordraidens comprehensive sound guide from step 1 to step 5, I used the module-assistant and istalled a driver that was called "hda-realtek-codec" or so. It was the only appropriate one on the list.
I also run into someoe with thesame problem. [URL]
i think ill give up and use the 8.10 that is still on a other partition
View 2 Replies
View Related
May 31, 2010
I have a SteelSeries Siberia USB soundcard. I'd like to get pulseaudio to automatically recognize it and switch to it when I plug it in.
Currently I have to go alsamixer in terminal, select the device and turn it up (It's always at zero when I plug it in). When I do this I can't control the volume with the buttons on my laptop, i have to either control the volume in the media player or move it up and down in alsamixer.
View 5 Replies
View Related
Jul 9, 2010
I'm having a rather peculiar problem with sound in Ubuntu 10.04. Specifically, every time I reboot I run through a cycle of sorts:
A). Sound is working fine. Reboot
B). No sound. "aplay -l" returns "no card found". Additionally, the hibernate and suspend buttons are missing from the shutdown menu and restart acts as log out, immediately returning me to the log in screen (sudo reboot in console works). I try to fix the problem by the following commands:
Code:
$sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
$sudo apt-get install linux-sound-base alsa-base alsa-utils
$sudo reboot
C). After rebooting sound works normally again and I get the following:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1828S Analog [VT1828S Analog]
Subdevices: 2/2
[code]...
I have "linux-backports-modules-alsa-lucid-generic" installed. I have been experiencing problems with audio since I bought this M/B, but with 9.10 things were stable and with my previous 10.04 installation bearable. Now, however, I practically can't work. I have to run the aforementioned routine every time I reboot. Additionally, I don't if it is relevant, but the problems started after I installed the audio drivers in Windows (another royal mess, but at least now it's stable and it works)
View 9 Replies
View Related
Jul 21, 2010
I have a SteelSeries Siberia USB soundcard. I'd like to get pulseaudio to automatically recognize it and switch to it when I plug it in. Currently I have to go alsamixer in terminal, select the device and turn it up (It's always at zero when I plug it in). When I do this I can't control the volume with the buttons on my laptop, i have to either control the volume in the media player or move it up and down in alsamixer.
View 1 Replies
View Related
Sep 2, 2010
I own an external usb soundcard: Creative Blaster X-Fi Surround 5.1. After some tweaking around Multimedia Settings, (K)Ubuntu 9.10 successfully detected the card. I can now use it.
However, setting the sound level in KMixer does not work at all - KMixer now only contains a Microphone channel. Using hotkeys, I can still turn volume from 0 to 100%, but that has no effect on the volume produced by the soundcard. The sound card comes with a sound joggle, but turning it left or right has no effect whatsoever on the volume level.
Is there a way to solve either of these issues? p.s. Also, the card came with a Windows app and driver cd.
View 3 Replies
View Related
Dec 12, 2010
my onboard soundcard (hda-intel ALC662) is not recognized in my new computer. It works fine with other distros, but ubuntu just does not seem to find it:
cat /proc/asound/cards
--- no soundcards ---
lspci -vvnn:
[code]....
View 3 Replies
View Related
Jan 18, 2011
I search at FFado.org for this soundcard and it says that it's fully supported, but I can't get it to work.
View 8 Replies
View Related
Jan 23, 2011
Has any one got this Sound card to work in Advanced mode: i.e 96KHz / 24 bit It works as a plug and play soundcard at 44Hz 16bit - but Alsa doesn't seem to support the "advanced mode" There is a kernel module driver here [URL] Couldn't get it to work though? When I perform
$ sudo make
I get this error
Quote:
make -C /lib/modules/`uname -r`/build SUBDIRS=`pwd` modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-24-generic'
CC [M] /home/rhid/mmusbaudio/mmusbaudio.o
Building modules, stage 2.
[code]....
View 3 Replies
View Related
Apr 10, 2011
I'm having a bit of a furball trying to change a soundcard. I took out an Audigy card. KDE detected the removal of the old card and asked me if I wanted to remove the drivers. I said yes. I went into the bios and enabled the onboard sound. Now I've got no sound so I guess I've got some configuration to do. So far:
[code]....
View 1 Replies
View Related
Jun 12, 2010
I want to be able to record the sounds coming through my soundcard with Audacity. How would i go about doing this?
View 1 Replies
View Related
Sep 1, 2010
I was listening to music and decided to check update manager, and after the install I reboot and then POOF, sound is gone, I checked Alsamixer and got "no such file" did aplay -l and got that there was no soundcard found, which I officially can say is bull, since, I DO have a card, hahaha. I am running a HP G72 and already went through the comprehensive check and kinda got with seeing which driver matched my card*EDIT*
heres some info I forgot to post
Code:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 1484
[code]....
View 9 Replies
View Related
Apr 4, 2011
I have had on and off problems with my sound for quite some time now. Each time it would stop working, I would find a fix which would work for a month or so, then I would go back to having no sound. I have had consistent sound on my Windows partition, so I don't think something is wrong with the hardware. The first fix I used was using "sudo alsa force-reload" to get ALSA working again. The latest fix I used was to add the line "options snd-hda-intel model=toshiba" to alsa-base.conf, which worked up until now. My built-in computer speakers won't make any sound, nor will my external monitors when they are plugged into the headphone jack. I do get sound when I plug in a pair of USB headphones.
I have tried using the Comprehensive Sound Problem Solution Guide [url], but I run into a predicament...
aplay -l (with or without being root) gives...
Code:
Code:
Alsamixer isn't much help either. It shows the name of my card in the top left, but there are no sliders to adjust.
I've tried compiling the modules from source, reinstalling through Synaptic, and plenty of other things, to no avail. Ubuntu 10.04 on a Toshiba Satellite U305-S5107
View 9 Replies
View Related
Jun 1, 2010
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies
View Related
Jun 11, 2010
i recently installed Ubuntu and the USB soundcard worked just fine, but when i changed the "Connector" in Sound Preferences (Output tab) the output stopped working (= no sound). Input still works. Sound did not come back even when i changed the Connector setting back (I hear no sound when its set to Analog Output as well as Analog Headphones, which are the only 2 setting).
View 5 Replies
View Related
May 13, 2015
I have a problem on a fresh install of Jessie with KDE. I have three soundcards. In Wheezy I used pavucontrol once for each application to change the sink from the internal to the external soundcard, and that setting would stick each time I rebooted the system (audio would go on the external soundcard). Now each time I reboot the audio gets routed to the internal soundcard and I have to use pavucontrol each time to route the audio back to the external one. URL...
putting this line in /etc/pulse/default.pa
set-default-sink alsa_output.usb-E-MU_Systems__Inc._E-MU_0404___USB_E-MU-0E-3F04-07D80A14-027A8-STATION_01-00-USB.analog-stereo
as well as this one, and issuing:
pacmd set-default-sink alsa_output.usb-E-MU_Systems__Inc._E-MU_0404___USB_E-MU-0E-3F04-07D80A14-027A8-STATION_01-00-USB.analog-stereo
and none of them has worked. I don't know if it's a related issue, but the settings I choose in the for Phonon in the KDE multimedia settings don't stick either. I select the external soundcard as default device and upon reboot the internal one is on top on the preferences list.
View 2 Replies
View Related
