Ubuntu Multimedia :: Defining Primary Display ( 3 Monitor Setup)?
Jul 6, 2011
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
View 3 Replies
ADVERTISEMENT
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
Jun 12, 2010
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
View 1 Replies
View Related
May 21, 2010
I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.
I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.
View 9 Replies
View Related
Feb 21, 2010
I am running Ubuntu 8.04 on a laptop. I have a 19" Acer monitor and in the past have successfully configured my xorg.conf to handle dual monitor setup with 1024x768 on the laptop and 1600x900 on the Acer monitor. What I have done now is run the laptop through a KVM switch. Due to this, I would like to set the Acer monitor as the primary monitor and just shut the laptop. How can I project my laptop screen to my Acer monitor so that I can use the 1600x900 resolution available rather than just cloning my laptop and using 1024x768?
View 1 Replies
View Related
Mar 9, 2011
So i was searching around my big desktop was working fine by default but I couldn't figure out how to switch my primary monitor and all the threads on this topic where real old and the fglrx drivers kept messing me up
so I went to my profile and showed hidden files and found a cool .xml file called monitors under .config
opend it up and chooses the primary monitor I wanted
very Nice Yes
View 1 Replies
View Related
Jun 25, 2010
I'm using a laptop and running a secondary monitor to my TV. My laptop has ATI HD 3400 video card. The TV has a higher resolution than the laptop's monitor. When the video is full screened on the TV, the actual video uses the resolution of the primary monitor and not the second.
View 2 Replies
View Related
Apr 8, 2011
I have google'd the crap out of this and have yet to find a "solved" forum. I currently have 2 sapphire ati 5770's in xfire. I also have two monitors. My (preferred) primary display has a dvi input and my other display is hdmi. I have them both plugged into only one of the cards. For some reason it keeps setting the hdmi display as the primary. And I want them in extended view. The ATI CCC suite does not support changing the primary monitor and I have tinkered with the xconfig but I do not really know what I am doing, so I have ultimately not been successful. here is my xorg.config file.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code]...
View 1 Replies
View Related
Apr 13, 2011
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Nov 21, 2010
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
View 2 Replies
View Related
Dec 14, 2014
How could xorg be set-up such that different monitors work with different DPI but still compose the same extended display?
I have a 15 inch laptop display extending to the right the main display which is 23 inch. The resolutions are comparable, but the difference in pixel size is very large. Thus, either the external display has too large fonts and UI, or the laptop one has them very small. Moving them at different distances is not entirely possible.
xrandr info:
eDP1 connected primary 1920x1080+2048+0 (normal left inverted right x axis y axis) 344mm x 194mm
VGA1 connected 2048x1152+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
I heard that Windows has a hack (which I can't check) for extending displays with different pixels sizes: it computes in which of the displays a window has most of it's surface and sets the DPI for that window based on that. Thus a window will change DPI when crossing monitors, (and will look too small/large on one of the monitors if it is in the middle).
View 0 Replies
View Related
Feb 4, 2010
All of a sudden today there was no display on my Ubuntu PC. It seems to be powering on - I get the LG screen when the monitor is switched on - but it goes into "Power Saving Mode". How do I diagnose this? I already unplugged and plugged. Monitor is connected to a graphics card - no change when I switched to VGA.
View 2 Replies
View Related
Mar 30, 2010
Suppose i'm this guy right there:[URL]..And all i'm used to seeing is this:[URL]..And clearly NOT this:[URL].. And my technical expertise dates back to early eighties, a few lines of x86 assembly and a few lines of C. And i haven't written a single line ever since (got bloody rich since win 3.1 shipped).
How can i get my gorgeous (20" portrait 30" 20" portrait) setup workin'? Just like in ol' good win xp - each monitor is handled like a separate entity not merged together in one big screen? A step-by-step guide would be perfect!
Both v-cards are ATI, supposedly working from the same drivers. I don't mind using a different linux distribution, if it makes matters any easier.
View 9 Replies
View Related
Jan 18, 2011
I have 3 monitors from left to right:1: dvi2: vga3: usb displaylinkBy default, the main ubunut screen shows up on the left #1 monitor.I tired swapping these around, ie going 213 but that messes it up. Is there a way to change the main listing|+menus to screen 2, which ius my middle screen? In Windows, this would be called the primary desktop.Secondly, how do I get screen 3 to work. Does it need a displaylink adapter for Linux?
View 5 Replies
View Related
Apr 11, 2011
I asked this question in the installation forum and got as far as possible with the advice there. I'm using a 32" Insignia TV as my sole monitor. I'm using the HDMI from the integrated video on my ASUS E35M1-M motherboard. I have it running at 1920x1080. When it boots up the monitor says the BIOS is running at 1080p, but as soon as Ubuntu loads the TV switches to 1080i. When I was setting the computer up the other day it was running 1024x768 and the text looked beautiful, now similar size text is blue/black and scraggly/shadowy looking. I followed some instructions for xrandr, but ran into problems and the person giving me advice admitted he was too unfamiliar with xrandr to get me any further. Here's as far as I get:
Code:
erik@erik-System-Product-Name-System-Product-Name:~$ cvt -r 1920 1080 60
# 1920x1080 59.93 Hz (CVT 2.07M9-R) hsync: 66.59 kHz; pclk: 138.50 MHz
Modeline "1920x1080R" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync
erik@erik-System-Product-Name-System-Product-Name:~$ xrandr --newmode "1920x1080R" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync
[Code]...
View 9 Replies
View Related
Oct 1, 2010
The G4 has two cards with me only using one.Booting into Linux single then running Xorg -configure gives me the output on both monitors from both cards.Rebooting after this setup the mouse does not work. A hard reboot and a phigh reset the display previous defaults.Do I need to edit the xorg.conf.new or the xorg.conf?
xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
[code]...
View 4 Replies
View Related
Mar 22, 2010
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
View 1 Replies
View Related
Jul 22, 2010
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
View 5 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Jun 25, 2011
I'm currently running a three-monitor setup, two of the monitors being connected to an NVIDIA card, and the third being connected to the motherboard's onboard ATI adapter. This works, and it actually works quite well, but after installing the nvidia-current drivers (using the GNOME dialog), I am unable to get any video acceleration going. The GLX module doesn't seem to want to load, and while I'm actually quite impressed with the video performance I'm getting with the open-source drivers, I'd really like to have the OpenGL capability, as it does make things look prettier.
Relevant configs and logs are below.
I should clarify - I don't care about the 3rd monitor on the ATI adapter; I'm only concerned with getting OpenGL working on the two on the NVIDIA - if that's possible, which it may not be...
System:
Code:
xorg.conf:
Code:
View 3 Replies
View Related
Apr 29, 2015
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
xrandr --output VGA1 --mode 1920x1200 --pos 3840x0 --rotate normal
xrandr: Configure crtc 2 failed
xrandr --output VGA1 --mode 1920x1200 --rotate normal --right-of LVDS1
xrandr: Configure crtc 2 failed
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 143521
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 5817108
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ....
View 2 Replies
View Related
Feb 18, 2010
I've played around with a second monitor, but so far I haven't found a satisfying solution. I am using a laptop with a GeForce 9600M GS graphics card. I have managed to set up twinview, but my monitors don't have the same height so I'd rather have something like the "seperate x screen" option. Or how I imagine that option would be like. After some problems with the nvidia configuration tool (I couldn't change the xorg.conf, until I read this: [URL] I now have two separate screens, but the second one is all empty, with black background and X-shaped mouse cursor.
There seems to be no window manager running, I can start programs there with -display :0.1 , but they don't get any frame decoration and, which is worse, no keyboard focus. I'd be fine with a fullscreen konsole there, so I don't really need a window manager, but I do need access from the keyboard. I'd prefer a setup that would allow me to easily (without editing xorg.conf) switch between using both monitors and using only one, because I don't always use the laptop at home.
View 3 Replies
View Related
Sep 2, 2015
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
View 0 Replies
View Related
Aug 17, 2011
having trouble setting up a dual monitor from my Dell xps laptop using an HDMI port. It dual boots onto Ubuntu 10.04. The computer has a Nvidia GeForce GT 555M with Optimus graphics card I need to make sure I have not installed the restricted drivers. So I think what is happening right now is that the graphics are shown off the integrated graphics card. This is my output from <lspci | grep VGA>
Code:
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0dcd (rev a1)
The forum recommends to use this program called Bumblebee but I have had some issues with that in the past. Is there somehow I can setup my dual display while staying on Ubuntu 10.04 and not installing Bumblebee? I have researched into setting up dual display walkthroughs before but they all concentrate on nvidia or ATI configurations.
View 6 Replies
View Related
May 29, 2010
I have two monitors, the internal LCD of the laptop, and an external 23". It is working well, but sometimes dialog boxes pop up on the laptop screen inconveniently. The Gnome panel is on the big screen. For example, Firefox is running on the "main" external big screen, I select Edit|Preferences and the dialog box comes up on the laptop screen. 9.04 didn't do this. Is there a primary monitor setting or something to fix this?
View 1 Replies
View Related
Oct 30, 2010
I've been having an issue with switching two of my monitors' status. I've got a 19' Sceptre monitor, and a 24' Samsung SyncMaster P2450.I'm using an ATI Radeon HD 5770 graphics card. I'm using 2 DVI ports to connect the monitors.Currently, all of the icons and menu bars are appearing on the Sceptre monitor. The Sceptre monitor is also to the left of the Samsung monitor. I've looked all through the Catalyst Control Center preferences and can not find anything useful.
View 2 Replies
View Related
Sep 29, 2015
Today I set up the energy settings like that:
10 minutes (screen), 20 minutes for suspension.
After around 30 minutes, I came back and switched back on the pc.
The primary monitor (VGA) was not detected, even after a system reboot.
More info about my pc:
Debian stable 8.2, kernel 3.16.0-4-686-pae.
I have an Nvidia card, but currently I am using nouveau drivers.
Two monitors: VGA (primary) and DVI (secondary).
Later I could get my primary monitor to work by switching tty (ctrl+alt+f3 and typing "startx" in the console).
I guess this is related to Xorg configuration (/etc/X11/xorg.conf is empty), but I am not really sure.
View 2 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
