I'm using a laptop and running a secondary monitor to my TV. My laptop has ATI HD 3400 video card. The TV has a higher resolution than the laptop's monitor. When the video is full screened on the TV, the actual video uses the resolution of the primary monitor and not the second.
View 2 Replies
I have two video outs on my AGP video card. One is VGA and the other is S-video. I tried connecting the second monitor (Viewsonic) by itself to the VGA port and it works fine and runs at 1280x768 very clearly. I then attached the LG monitor instead to the VGA and attached the Viewsonic to the S-video port. Now it is running at 1024x768 and I have no option to increase the resolution.Is this a limitation based on S-video being worse than component, which is worse than VGA and it simply cannot handle the data density for larger resolutions? Or would it be my video adapter? I swear I had monitor control working fine through the panel, but now when I click on the monitor button it says, "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and that opens an Nvidia X control panel.
Also, using S-video means the computer doesn't recognize the Viewsonic LCD TV properly, it just recognizes it as a TV. Is this because S-video doesn't play nicely with EDID reporting?It would be nice to get a sharp picture on that TV, the way I had when it was connected like a monitor via VGA. I am not sure what's going on anymore, so any help on clearing up driver issues or getting configuration apps installed or anything like that would be helpful.
i have some issues running twinview through my laptop and an additional monitor. i currently have the nvidia settings such that the monitor is the primary screen. however, whenever i click full screen in videos or another application, it maximizes in my laptop screen. also - when i maximize videos videos, the screen fills up, but the actual video size doesn't tend to increase (it doesn't stretch to fit). is this an adobe problem? ubuntu 10.04, nvidia driver v195, dell latitude d630 laptop.
View 2 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedI am running Ubuntu 8.04 on a laptop. I have a 19" Acer monitor and in the past have successfully configured my xorg.conf to handle dual monitor setup with 1024x768 on the laptop and 1600x900 on the Acer monitor. What I have done now is run the laptop through a KVM switch. Due to this, I would like to set the Acer monitor as the primary monitor and just shut the laptop. How can I project my laptop screen to my Acer monitor so that I can use the 1600x900 resolution available rather than just cloning my laptop and using 1024x768?
View 1 Replies View RelatedSo i was searching around my big desktop was working fine by default but I couldn't figure out how to switch my primary monitor and all the threads on this topic where real old and the fglrx drivers kept messing me up
so I went to my profile and showed hidden files and found a cool .xml file called monitors under .config
opend it up and chooses the primary monitor I wanted
very Nice Yes
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies View RelatedI have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies View RelatedopenSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250
Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.
Can I make the blank VGA options permanent?
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies View RelatedI have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
View 9 Replies View RelatedI just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
i'm trying to set the resolution to 1440 x 900 on ubuntu manually since it's not being showed under the options. I've followed this tutorial [URL] The problem is that i don't have the output name to add on this command (as you can see below under the xrandr command.:
xrandr --addmode XXXXX 1440x900
xrandr
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
[Code]....
Since a fresh install of lynx, I've been having problems trying to get my resolution of 1366x768 to fit properly onto my monitor, regardless of what I try, the screen does not fit completely inside the monitor, and I have to pan around to view the entire desktop.
I haven't had problems with this in previous versions of ubuntu. I've tried all the nvidia driver versions in the repository, as well as the latest from nvidia itself and they all do the same thing.
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
I started using Ubuntu 11.04 today.
Everything works fine with my monitor directly connected to the computer. I get a default screen resoluton of 1600 x 1280, which is just fine.
However, when I connect the screen through a video splitter to be able to use a beamer, the screen resolution defaults to 1024x768. Moreover, Ubuntu then detects an unknown monitor.
I recall that I have solved this problem before with an older version of Ubuntu.
Now it seems that there is no xorg.conf anymore so I don't know what to do.
How can I force Ubuntu 11.04 to start with a screen resololution of 1600 x 1280.
I have an EeePC 1005HA with Intel 945G chipset and graphics. I've got a 21" no-name touchscreen attached to the laptop with the intention of hiding the laptop away behind it and simply using the tactile widescreen with virtual keyboard (onboard). By the way, the Touch screen is working great OOTB in Ub 11.04, although will have to tweak some more to get multi-touch working.On it's own the netbook runs 1024x600 (16:9) automatically. As soon as I plug in the larger monitor and mirror the images it auto-defaults both to 800x600 60hz and I have no options to select a higher res. I want to be able to run the large screen in something like 1024x600 or better, as long as its 16:9. At the moment everything is stretched out on the larger screen and on the netbook I have a 800x600 with black margins left & right.
Can't seem to work it out. The Monitor Config doesn't give me any higher options than 800x600 when mirrored. Below is the output of xrandr, if it's any help. Also my xorg.conf file is practically empty.
Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.
View 6 Replies View RelatedI've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.
My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course
I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30 - 75
VertRefresh56 - 61
EndSection
[code]....
With both 1600 x 1200 and 1680 x 1080 I get the resolution but I see lots of shadowing.(The letters are not crisp) Do I need to upgrade any driver ?
~$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
I recently got a computer and installed the ubuntu 10.04 beta on it. I'm having issues getting my monitor to display at the correct resolution. It should be displaying at 1440x900, but the highest resolution I can select from the displays configuration panel is 1366x768, which is not even the correct aspect ratio.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
This is the whole thing, in case it helps.
From what I have read, this is a brand new chipset with the GPU built into the main CPU, as if it were another CPU core. Is there a driver for this yet, or do I have to deal with an improper resolution?
This has been happening with the majority of screens I try to plug into, but the proprietary nvidia driver never detects the correct resolutions -__- the open-source driver works perfectly with a little xrandr magic, but I'd like to have some 3D acceleration going on. I'm using the desktop version of Nvidia ION and ubuntu 10.10, with the current nvidia driver (from the repositories). The native resolution is 1440x900 @60 Hz. Any thoughts on this? Again, the nouveau driver is great but I'd like to have VDPAU and the like working. code...
View 9 Replies View RelatedI have a dell studio hybrid PC which I am hooking up to my TCL brand 40" LCD TV to use as a media center pc. The problem I am having is that I can't get the TV's native 1920x1080 resolution to display properly. The rendered desktop doesn't quite fit in the screen (I think its the top and bottom edges that are cut off) so for example the menu bar at the top is completely off the screen.
1680x1050 works fine in the sense that it fits the full desktop to the screen size, but its not the native res. In the resolution changer utility, it recognizes that my TV is a TCL brand but mentions 36 in the model name (the TV I have has 40 in the model name to denote 40") so I think Ubuntu is recognizing the wrong size TV. How can I finagle the screen settings to make the 1920x1080 fit properly on my monitor? Or get Ubuntu to correctly recognize my TV? My TV is a no-name brand so its hard to find info on it or others setting up linux with it.
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
I have a dual boot system with Windows 7 and Ubuntu 10.10. I want to make my grub menu look good and have set a beautiful background image to it and set the resolution so it fits the screen. Is it any way to resize the actual menu to make it smaller without shrinking the background picture?
View 1 Replies View RelatedI'm looking for something that will graph my internet speeds. Not what I'm currently utilizing for bandwidth on any single machine or group of machines; what my internet is actually capable of.
Reason? I am with a garbage ISP that has overloaded their equipment. During peak times, I run speed tests and they're about .4mbps when I should be getting 6mbps. I'd be content with 4mbps. They keep telling me it's my firewall, but even when I bypass the firewall, I get the same results. They're telling me I'm crazy.
I would like something that will run 1 speedtest an hour and graph the results. I can handle the cron side, but I only know bash, which doesn't appear to be capable of this. Does anyone know of something already made that I could use under Ubuntu and/or CentOS?
This system is basically working fine, but I'd like to change the video resolution. It has defaulted to the monitor's native resolution, which is 1920 x 1024. I'd like to set 1600 x 900. However, it's not in the list. In fact, the other resolutions listed in System => Preferences => Monitors aren't even the same ratio -they're more like the old 4:3.
Background: desktop pc with AMD64, 4GB RAM, etc.video is Nvidia Geforce 8200 or 8400installed debian 6.0 with the default "base" or "basic" or somesuch, plus "graphical environment". It's Gnome 2-series I believe.And it seems to be using the Nouveau driver as far as I can tell.So I Googled, and on various pages people said to edit the file: etc/X11/xorg.conf
However, there is no such file on my system. So I googled more, and posters give the following advice: kill the X server, kill the gdm, and then give command: Xorg -configure and this is supposed to generate the config file. However, for me it did not generate the file. Instead it failed with the error message: "Number of created screens does not match number of detected devices".
