Ubuntu Multimedia :: How To Use External Monitor As Primary Screen
Feb 21, 2010
I am running Ubuntu 8.04 on a laptop. I have a 19" Acer monitor and in the past have successfully configured my xorg.conf to handle dual monitor setup with 1024x768 on the laptop and 1600x900 on the Acer monitor. What I have done now is run the laptop through a KVM switch. Due to this, I would like to set the Acer monitor as the primary monitor and just shut the laptop. How can I project my laptop screen to my Acer monitor so that I can use the 1600x900 resolution available rather than just cloning my laptop and using 1024x768?
View 1 Replies
ADVERTISEMENT
Apr 13, 2011
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
Jun 12, 2010
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
View 1 Replies
View Related
Sep 14, 2010
The monitor on my laptop has become a bit sketchy and money is tight at the moment. I am currently connected to an Acer flat screen monitor. I have the ubuntu settings for using only the external monitor. This works fine once I"m in Ubuntu. Is there any way to force the display to the external monitor prior to ubuntu starting? This may or may not be a linux-related question. It was be very helpful if I could see my Grub menu on the external screen. I could not find any setting in my bios. The keyboard shortcut sometimes works but not on the grub menu.
Ubuntu Lucid
Dell Precision M20 laptop
ATI video card
Dual boot with XP Pro.
View 1 Replies
View Related
Apr 27, 2011
I have a Toshiba Satellite Pro L500 laptop on which I installed the beta of Ubuntu 11.04. Things seems to work smoothly at the moment, but with one niggle. I have an external monitor connected to my laptop, and can manage to have a dual-screen configuration, and I am able to move the mouse from one screen to another correctly; however, the menus, status bars and window icons remain stubbornly only on the laptop screen. This is happening with Unity as well as Gnome.
If I disable the laptop screen with grandr (the Gnome GUI for xrandr) they do migrate on the external screen, but they swoosh back to the laptop if I reactivate it. Trying to alter the layout with grandr or using xrandr with the --right-of option from the command line do not change anything good. I randomly get the laptop screen to become half black.Incidentally, something like it used to happen with Fedora 12 (I think) some months ago.
View 3 Replies
View Related
Jan 16, 2010
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
View 2 Replies
View Related
Sep 11, 2010
I run a dual-screen setup, and the installation detected both screens without troubleowever I want to change primary screen, so the panels and menus will be located in the biggest monitor.I am not able to do this in the System -> Preferences -> Monitors interface. Where can I do this simple operation
View 2 Replies
View Related
May 27, 2010
I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show login screen always on primary monitor with resolution 1280x1024? I use Ubuntu 10.04.Now I'm ready to modify gdm sources if there is no such option in configuration files.
View 1 Replies
View Related
Feb 9, 2010
I have openSUSE 11.2 KDE with NVIDIA drivers. I have a TV on the left and a monitor on the right. In the Nvidia drivers this has also been setup as stated. The TV is on position 0:0 and the monitor is in position 1920:0. The monitor has been ticked in the drivers as the primary screen.
My problem is that all application open on the secondary screen and not the primary screen (monitor) as I expect. How to the OS/drivers that will ensure that application always open on the monitor situated on the right are welcome.
View 5 Replies
View Related
Feb 21, 2010
My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode.
However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu).
View 3 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Mar 9, 2011
So i was searching around my big desktop was working fine by default but I couldn't figure out how to switch my primary monitor and all the threads on this topic where real old and the fglrx drivers kept messing me up
so I went to my profile and showed hidden files and found a cool .xml file called monitors under .config
opend it up and chooses the primary monitor I wanted
very Nice Yes
View 1 Replies
View Related
Jun 25, 2010
I'm using a laptop and running a secondary monitor to my TV. My laptop has ATI HD 3400 video card. The TV has a higher resolution than the laptop's monitor. When the video is full screened on the TV, the actual video uses the resolution of the primary monitor and not the second.
View 2 Replies
View Related
Jul 6, 2011
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
View 3 Replies
View Related
Mar 18, 2010
i'm using a monitor and a lcd tv. how can i set my monitor as my primary screen? for example if i open a videos video in fullscreen mode it always plays on my monitor, but i want it to play it on the lcd tv.
my xorg.conf
html code:
section "serverlayout"
identifier "amdcccle layout"
screen 0 "aticonfig-screen[0]-0" 0 0
endsection
[code]...
View 1 Replies
View Related
Feb 13, 2010
I am a recent convert to Ubuntu 9.10. I have installed it on my by travel laptop, which is docked when at home with a 22' ViewSonic screen.
Under Windows all is good, I just plug it in and whamo, I can close the laptop lid and use the Viewsonic as my primary screen.
Under Ubuntu, it appears the above is impossible. I seek your guidance as below.
Q. Is it possible dock my 22" screen as my primary screen with my laptop?
Q If it is possible, how do I do it?
View 2 Replies
View Related
Jul 3, 2010
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies
View Related
Aug 28, 2009
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
View 9 Replies
View Related
Jul 2, 2010
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies
View Related
May 14, 2010
I use Ubuntu Netbook Remix, and I've installed Lucid over Karmic. (Not an upgrade process, because I didn't have enough space on my primary drive.) I have an Acer AL1511 LCD screen attached as a second screen - ie dual head. All that works fine. However....
I rely on xcalib from Stefan Doehla to invert my screen gamma ramps, ie turn them to white text on black backgrounds. This worked perfectly, just using
xcalib -i -alter
but now, xcalib only inverts the netbook screen. The second screen remains stubbornly unaffected.
Since xcalib has not changed, and it works on one screen, maybe something changed between Karmic and Lucid.
View 2 Replies
View Related
May 4, 2010
I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right.
If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?
View 2 Replies
View Related
Feb 19, 2010
I'm using dual-screen output with KDE 4.4 on my laptop. Is it possible to have the KDE panel on the external monitor if attached and back on the laptop's LCD panel as soon as the monitor is disconnected?
It seems that Plasma prefers the built-in LCD even if an external monitor is connected. I tried various settings with xrandr and also in the System Settings but none of them helped. The only way to move the KDE panel to the external screen is to disable the built-in LCD.
What I would basically like to do is to use the external monitor as primary in the office and the laptop LCD next to it as a second screen. When I'm traveling I'd like to use only the laptop LCD.
Is there also a nice way to switch between the screens? On the Internet I found a script for the "screen switch" key for IBM Thinkpad and modified it to work on my Dell. But it would be nice to have this also automatic: autodetect the monitor attachment/removal and perform a configured action. The KRandr doesn't seem to have such a feature. Is there anything I could use?
My system is: Kubuntu 9.10 with KDE 4.4 upgrade. Hardware: Dell Inspiron 1545 with Intel GM45 card.
View 3 Replies
View Related
Apr 3, 2011
Just did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
View 4 Replies
View Related
Mar 28, 2016
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
View 1 Replies
View Related
May 10, 2011
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies
View Related
Sep 22, 2010
I have a mac book pro 5,3 with the nvidia gforce 9600m. After getting Ubuntu installed as a dual boot, I wish to use an external monitor while using Ubuntu. (it doesn't have the problem with OS-X) The external monitor is a samsung syncmaster 192 n. when I connect the other monitor and press 'detect display' both go grey creens(the external already is of course). My lapton screen will not recover until restart either. I need this monitor to run a numerical mesh 3d mesh creator that will not fit on my screen alone. Wouldnt be a problem if the creators were software engineers but the program window cannot rescale, and is beyond the resolution capabilities of my 15'' screen alone.
View 1 Replies
View Related
Sep 24, 2010
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
View 8 Replies
View Related
Oct 16, 2010
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
View 1 Replies
View Related
May 24, 2011
I have an EeePC 1005HA with Intel 945G chipset and graphics. I've got a 21" no-name touchscreen attached to the laptop with the intention of hiding the laptop away behind it and simply using the tactile widescreen with virtual keyboard (onboard). By the way, the Touch screen is working great OOTB in Ub 11.04, although will have to tweak some more to get multi-touch working.On it's own the netbook runs 1024x600 (16:9) automatically. As soon as I plug in the larger monitor and mirror the images it auto-defaults both to 800x600 60hz and I have no options to select a higher res. I want to be able to run the large screen in something like 1024x600 or better, as long as its 16:9. At the moment everything is stretched out on the larger screen and on the netbook I have a 800x600 with black margins left & right.
Can't seem to work it out. The Monitor Config doesn't give me any higher options than 800x600 when mirrored. Below is the output of xrandr, if it's any help. Also my xorg.conf file is practically empty.
View 9 Replies
View Related
