Ubuntu Multimedia :: Can't Change Primary Display With Ati Ccc Or Xorg.config?
Apr 8, 2011
I have google'd the crap out of this and have yet to find a "solved" forum. I currently have 2 sapphire ati 5770's in xfire. I also have two monitors. My (preferred) primary display has a dvi input and my other display is hdmi. I have them both plugged into only one of the cards. For some reason it keeps setting the hdmi display as the primary. And I want them in extended view. The ATI CCC suite does not support changing the primary monitor and I have tinkered with the xconfig but I do not really know what I am doing, so I have ultimately not been successful. here is my xorg.config file.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code]...
View 1 Replies
ADVERTISEMENT
Mar 3, 2010
Now that I have system-config-display installed I tried to create a new xorg.conf so I can have 3D acceleration, etc using the correct driver. But the xorg.conf file generated does not work. It locks up the laptop (Toshiba Satellite A45-S250). I don't understand why this happens because the Fedora 12 Live CD (for i686) works find on boot.
I tried looking for the xorg.conf file after booting the live CD but it doesn't exist. I don't understand what is happening here. Also, when I used an older version of Fedora (8 I think) the X driver was i810 which worked fine. It gave me all the 3D acceleration, etc. When I installed F11 it gave me a dumbed down install using the VESA driver. What happened to the i810 driver? Why does the intel driver not work? Why does the Live CD work great but an installed system not?
Necessary info: Toshiba Satellite A45-S25 Fedora 12 (preupgraded from F11)
View 1 Replies
View Related
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
Jul 6, 2011
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
View 3 Replies
View Related
Feb 14, 2010
I have connected my computer to my LCD-TV (HDMI-cable) to enjoy my movies and such, on a big screen. I have nVidia GeForce 7050 so in nvidia-settings I've been using the TwinView configuration which allows me to see both the monitor and the TV.
There was a bit of trouble-shooting but it worked just fine until yesterday when I changed my monitor to a new one and on the way probably messed up in nvidia-settings. I thought it would be easy to fix it but the configuration (in nvidia-settings) is stuck on "separete x-screen" and doesn't allow any changes at all. When I hit the "Detect display" nothing happens although I have the TV connected!
Maybe my xorg.config could tell somebody what is wrong. I've been messing around with the file and made lots of changes acc to different advices but I really don't understand the options and settings so I'm afraid I'll soon do something inreperable.
[Code]...
View 5 Replies
View Related
Mar 9, 2011
So i was searching around my big desktop was working fine by default but I couldn't figure out how to switch my primary monitor and all the threads on this topic where real old and the fglrx drivers kept messing me up
so I went to my profile and showed hidden files and found a cool .xml file called monitors under .config
opend it up and chooses the primary monitor I wanted
very Nice Yes
View 1 Replies
View Related
Feb 28, 2010
I just bought a new desktop with integrated intel graphics and built in HDMI. I don't have a monitor, only a 42 inch LCD TV. Now, when I plugged in the HDMI cable, when ubuntu loaded, it was oversized(overscanned) cutting off both panels(think zoomed in a bit). After failing to fix, I bought an ATI HD4350. When using the open source ati drivers(default on reboot), the screen looked perfect and fit perfectly when using the DVI to HDMI cable to the TV, was a bit UNDERsized when using a regular HDMI cable to the HDMI port on the new video card. Now, when I installed Catalyst...same problem as before. Entire image was overscanned using either port. Decided to get a better video card anyways, so returned ATI for Nvidia 9500. When booting again into a clean install, with nv drivers and using DVI-> HDMI cable(9500 doesn't have HDMI out), the image again fit perfectly on the TV. When installing the Nvidia proprietary driver, image goes back to being overscanned(Exactly same proportion as intel HDMI out and ATI with catalyst). Thankfully Nvidia gives an overscan correction tool that I scaled the picture down with, but it's ever so slightly off center or our of proportion(that is, it leaves small black strip on either side when height is adjusted perfectly).
In a nutshell, the open source drivers display perfectly. Proprietary and intel drivers are overscanned. Now, to confuse you anymore, with Lucid, even the open source ATI driver is overscanned by default. I'm trying to track this problem down and have no idea where to start.
View 2 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
Jan 8, 2010
My viewsonic monitor will only go to 800x600 resolution on ubuntu..I had a similar problem with centos but went in an manually configured as root the display GUI and increased the resolution. Is there any way to do this with ubuntu? 800x600 is annoying on a 17" high end monitor
View 6 Replies
View Related
Aug 4, 2010
I want to change color depth, but there's no xorg.conf file to edit... what to do? btw, shouldn't there be a simple gui for that? Like for changing resolution
View 5 Replies
View Related
Jul 10, 2011
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
View 3 Replies
View Related
Jun 29, 2010
I did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
View 14 Replies
View Related
Aug 18, 2010
I was trying to disable touchpad click, added a section to /etc/X11/xorg.config, and now the OS never starts up, the laptop just runs... This is my second day with the machine, I've done a ton of setup but haven't yet setup a backup utility... is there any way for me to just go in and change the file back to the way it was?
View 3 Replies
View Related
Jun 12, 2010
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
View 1 Replies
View Related
Jun 2, 2010
I am on Lucid 10.04 with Nvidia 9600m (v195.36.24) My TV is 1280x720, my Laptop is 1600x900 (Closest setting to the TV is 1360x768 ). I plug my laptop to my tv via an HDMI cable. I press F1 to get into my presentation mode, and the tv shows most of the desktop, but not all of it. Is there any way to conveniently make it so it automatically sets it to 1280x720?
View 1 Replies
View Related
Sep 9, 2010
Noticed that gdm 3 updated to new version (2.30.5-1) which displays nice avatar for each user on the login prompt. Now there seems to be only placeholder pic for every user on this computer, but of course I want to have real picture there to greet the users. So the question is, where can I change the pictures?
View 4 Replies
View Related
Dec 9, 2010
I searched the forums for a long time and could not found any relevant informationI am new to ubuntu (10.10 64bit) and I just want to know if it is possible, like it is in win7 (sorry!), if I can plug in my hdmi cord and have the laptop speakers and display disable, and have the external display and its spears enabled.
View 2 Replies
View Related
Aug 15, 2011
How do I edit this file to include 1680x1050 resolution?
View 9 Replies
View Related
May 21, 2010
I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.
I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.
View 9 Replies
View Related
Dec 4, 2010
Was trying to play some new games, so was trying to install the ati drivers for my x15xx or something card.
anyway i am using ubuntu 10.10, so was having to try force them, using 9.10 config or something.
anyway got it installed, restarted and I get black screen have been trying to go back to "vesa" drivers or something. but been having no luck
I do not have a "/etc/X11/xorg.conf". and I cannot seam to make 1 using stuff like aticonifig --initial --input=/etc/X11/xorg.cong or anything like that
I am really stuck, even using dpkg-reconfigure or something didnt make the X11 conf
View 7 Replies
View Related
Apr 15, 2010
Normally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. [URL]
I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: [URL]
This is a laptop, to which I connect an external hdmi display when I get to work. dipser -e extends the desktop for me, but the laptop remains the primary desktop (holding the panels etc). nvidia-settings can set primary monitor for me, but I want to use the cli.
View 4 Replies
View Related
Apr 21, 2010
When trying to conigure via nvidia-setting using root (sudo) and then saving to config file I get the ' Unable to open X config file '/etc/X11/xorg.conf' for writing.' in a message box - below is what i get on terminal:
Code:
Traceback (most recent call last):
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 75, in <module>
operation_status = main(options)
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 51, in main
[Code]...
View 7 Replies
View Related
Mar 29, 2010
I am trying to set up a permanent resolution in the xorg.conf file. At the moment whenever I reboot the machine the resolution defaults to auto. How I can change that to be constantly at 1600x1200?
Here is my xorg.conf file.
Code: # nvidia-xconfig: version 1.0 (buildmeister@builder62)
Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "stylus" "SendCoreEvents" # Added
InputDevice "eraser" "SendCoreEvents" # Added
InputDevice "cursor" "SendCoreEvents" # Added
InputDevice "pad" "SendCoreEvents"
EndSection .....
View 2 Replies
View Related
Jun 19, 2010
I've just built a new system, the motherboard has an inbuilt ATI 4290 video (part of AMD GX890) and I'm using it with a Dell 2405 monitor. I've installed the latest Catalyst driver (10.6) from the AMD site, I can build the driver and X starts OK. The control panel for Catalyst says it will support 1920x1200 for a DVI connected screen - which mine is. When I start X it's always 1600x1200 and if I set the resolution via the Catalyst control panel, I get a display that has a black edge on the right of the monitor - about 1/4 of the screen.
At this point, I haven't tried setting any Modelines in xorg.conf as the fglrx driver is getting the information from the monitor via DDC and I'm assuming (probably a bad idea) that this data is correct.
Can anyone make any suggestions regarding this? Should I be setting Modelines regardless of what the driver gets from the monitor? Log files available if requested. Other that the 1600x1200 limitation, the system (AMD X6 1090t) runs very well.
View 3 Replies
View Related
Nov 22, 2010
Is there a method of changing the Primary DNS other than system-config-network?When using system-config-network the new settings are always over written with the original settings after re-boot.
View 3 Replies
View Related
Aug 5, 2009
What config file do you change to change default run level???
View 3 Replies
View Related
Mar 16, 2011
I've been fighting with this nearly for three hours, but nothing seems to be working. I have one Gigabit Realtek chip integrated on my Mainboard (which I use for internet connection), and one aditional 100Mbit in PCI slot. So, I basically want to use this 100Mbit for testing purposes, but when I connect something to this 100Mbit NIC adapter, it becomes default and I can not access internet. So, I want to set my eth0 (gigabit integrated adapter) as default adapter.
P.S. I've tried to edit /etc/network/interfaces and iftab, but nothing worked.
View 8 Replies
View Related
May 9, 2011
I have first installed Windows7 to sda2 (sda1 being the MBR). Then I installed Ubuntu as follows: sda3 /boot, sda5 swap (sda4 being the Extended partition), sda6 /, sda7 /home. So far so good. Windows and Ubuntu worked fine. I also planned to create another partition for data and two more partitions for Arch Linux. And here is the problem.I just assumed that the Extended partitions were created logical but actually they are also primary. So, as things stand, all my 7 partitions are primary and I cannot create any more partitions.I must've erred somewhere during the Ubuntu installation. Is it possible ti change the Extended partitions into logical, without affecting all the stuff within? Any ideas? Otherwise I will have to delete everything after Windows and install Ubuntu again, making sure that I create logical partitions in the Extended part
View 9 Replies
View Related
