Debian Multimedia :: Extended Display With Different DPI On Each Monitor
Dec 14, 2014
How could xorg be set-up such that different monitors work with different DPI but still compose the same extended display?
I have a 15 inch laptop display extending to the right the main display which is 23 inch. The resolutions are comparable, but the difference in pixel size is very large. Thus, either the external display has too large fonts and UI, or the laptop one has them very small. Moving them at different distances is not entirely possible.
xrandr info:
eDP1 connected primary 1920x1080+2048+0 (normal left inverted right x axis y axis) 344mm x 194mm
VGA1 connected 2048x1152+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
I heard that Windows has a hack (which I can't check) for extending displays with different pixels sizes: it computes in which of the displays a window has most of it's surface and sets the DPI for that window based on that. Thus a window will change DPI when crossing monitors, (and will look too small/large on one of the monitors if it is in the middle).
View 0 Replies
ADVERTISEMENT
Mar 9, 2010
I am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
View 2 Replies
View Related
Jun 4, 2015
I'm having trouble with Debian 8 and using my dual monitor setup. Whenever I install a desktop that uses lightdm as a display manager (XFCE, MATE, Cinnamon) the login screen is cloning the two monitors rather then extending the desktop. I don't have the issue with gnome 3 (gdm) or kde (kdm). I tried installing Slim as well, but that has the same cloning issue.
I had a similar issue with g the XFCE environment, but I was able to resolve it by installing arandr and configuring the monitor layout. Upgrading from Stable to Testing also fixed the XFCE issue with the newest version of XFCE. Unfortunately I still have the display manager issue (lightdm/slim) in Testing as well. I would prefer to use XFCE but I'm willing to move to Gnome 3/KDE if need be to resolve the issue with the login screen.
View 3 Replies
View Related
Apr 13, 2011
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Feb 4, 2010
All of a sudden today there was no display on my Ubuntu PC. It seems to be powering on - I get the LG screen when the monitor is switched on - but it goes into "Power Saving Mode". How do I diagnose this? I already unplugged and plugged. Monitor is connected to a graphics card - no change when I switched to VGA.
View 2 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
Jul 6, 2011
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
View 3 Replies
View Related
Aug 7, 2009
I am somewhat new to CentOS, but I have read a lot of web pages and tried a good number of things trying to solve my own problem. I have made it worse a few times, but never better. I have an envision 1440x900 LCD monitor and a S3 Savage video chip on the motherboard. In System->Administration->Display->Hardware I am using generic LCD Panel 1440x900 and the video card is listed as "S3 Inc. VT8375 [ProSavage KM266/KL266]. I believe both of these to be correct. I have added the mode to my xorg.conf
The problem is, under System->Preferences->Screen Resolution, the mode 1440x900 does not appear. The highest resolution is 1280x768. Does the S3 Savage just not have the ability to produce 1440x900?
[Code]...
View 7 Replies
View Related
Jul 18, 2010
My current set up in OS X has an external monitor (Acer H243H) and my MBP 13" screen as an extension. The only way for me to currently get the menus and panes on the external monitor is to turn the Macbook display off. is there any way for me to change this?
View 1 Replies
View Related
Apr 11, 2011
I asked this question in the installation forum and got as far as possible with the advice there. I'm using a 32" Insignia TV as my sole monitor. I'm using the HDMI from the integrated video on my ASUS E35M1-M motherboard. I have it running at 1920x1080. When it boots up the monitor says the BIOS is running at 1080p, but as soon as Ubuntu loads the TV switches to 1080i. When I was setting the computer up the other day it was running 1024x768 and the text looked beautiful, now similar size text is blue/black and scraggly/shadowy looking. I followed some instructions for xrandr, but ran into problems and the person giving me advice admitted he was too unfamiliar with xrandr to get me any further. Here's as far as I get:
Code:
erik@erik-System-Product-Name-System-Product-Name:~$ cvt -r 1920 1080 60
# 1920x1080 59.93 Hz (CVT 2.07M9-R) hsync: 66.59 kHz; pclk: 138.50 MHz
Modeline "1920x1080R" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync
erik@erik-System-Product-Name-System-Product-Name:~$ xrandr --newmode "1920x1080R" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync
[Code]...
View 9 Replies
View Related
Mar 17, 2010
I have extended desktop working on my netbook (finally, by turning off compiz), but now Gnome prefers my netbook's main screen as the main display (with the panel and such) instead of my external monitor.How can I switch this? I don't see any setting for it in the Display dialog.
View 3 Replies
View Related
Mar 22, 2010
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
View 1 Replies
View Related
Apr 16, 2011
I have XFX ATI-HD5670 and use proprietary catalyst 11.2-1 in 64-bit Fedora 14.
I am not sure when this started, or if it ever did work before, but when I started noticing that the screensaver will not turn off the monitor, I set the gnome power manager to make the monitor sleep after an hour.
Now, the display will not turn back on after it has been in sleep mode. I know the system is still running fine as I can ssh from another PC and see that everything seems to be normal, no error message in dmesg, /var/log/Xorg.0.log, etc.
/var/log/Xorg.0.log shows that monitor DPMS is not detected but still enables DPMS:
Is this a problem with catalyst driver? I know it's not the PC or the monitor, because I have a 2nd PC with the same video driver with the same problem, but others without this driver don't (ati open source, nvidia, etc. all work fine.)
I'm wondering if the problem always existed before, but I just didn't notice it because the display sleep mode was never set? If that's the case, my hunch is that it looked like it worked because the monitor was smart enough to turn itself off when the screensaver kicked in and just showed a blank screen, and the video driver was never involved with sleep mode until I set it in gnome power manager, at which point it started showing this problem of not waking up? And because the screensaver was no longer set to blank the screen, but to show some animation, that's why the monitor will never sleep anymore?
View 2 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Jan 14, 2011
Recently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com
Initially twin view ( same desktop viewed on both monitors ) worked no problem
Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.
Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...
If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..
View 1 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Feb 24, 2011
I'm running ubuntu lucid on a home-built computer with an ATI Radeon R300 NE [Radeon 9500 pro] video card and a cheap-o (Norcent) flat panel. Within the last week I've had a problem where the display gets horizontal and vertical stripes when I "wake it up" with the mouse. I can almost see what is supposed to be on the screen and I can use the mouse (the cursor is a big blocky area) enough to shut the computer down. Oddly, opening a new terminal (TTY1?) using Ctrl-Shift-F1 doesn't fix the monitor problem. Also, you can see the display problem when using xvnc4viewer from another computer.
I have found a number of similar issues in the forums, but haven't found a solution (nor can I find xorg.conf in lucid...). It just happened, so I wonder if it is something that broke in an update. There is nothing recorded in the logs that seem to apply to video problems.
View 2 Replies
View Related
Feb 18, 2010
Just got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
View 2 Replies
View Related
Jul 17, 2011
I'm a newcomer to Linux and so I apologize in advance for my question (that may be a newbie's question indeed).I've just changed my system from Lenny and installed the newest version of Squeeze ( X.Org X Server 1.7.7, Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian).When adding a second monitor (smaller with different specs) I get the same resolution on both screens--that of the smaller one.
View 3 Replies
View Related
Aug 19, 2015
I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
View 1 Replies
View Related
Jul 10, 2010
I don't know how to stop this monitor standby thing. When I'm not using the computer, the screensaver will start after a few minutes, what I want. But after a few minutes then, it'll go black. How can I stop this from happening?
View 12 Replies
View Related
Oct 1, 2010
The G4 has two cards with me only using one.Booting into Linux single then running Xorg -configure gives me the output on both monitors from both cards.Rebooting after this setup the mouse does not work. A hard reboot and a phigh reset the display previous defaults.Do I need to edit the xorg.conf.new or the xorg.conf?
xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
[code]...
View 4 Replies
View Related
Mar 7, 2015
I am using xfce4 and in this image
The top bar only shows the bottom half. the bottom bar only shows the top half. i also can't see anything after the r in centre on the right. part of the initial picture on the left also does not display.
My thought is that the tv it has a resolution of 1920x1080 and this is causing the issue. i have this in my xorg.conf:
Code: Select allSection "Screen"
  Identifier   "Screen0"
  Device     "Device0"
  Monitor    "Monitor0"
  DefaultDepth  24
  Option     "metamodes" "nvidia-auto-select +0+0; 1920x1080_60 +0+0"
[Code] ....
The graphics card is
Code: Select all02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8300] (rev a2)
Changing metamodes to 19200x1200 doesn't change anything.
View 4 Replies
View Related
Sep 29, 2010
I've been dual booting Lenny and Squeeze but after replacing Lenny with a fresh Squeeze using ext4, the video display has been strange. The effect is similar to running a live CD, where a click does nothing for a few seconds while the CD winds up and gets to the application, but slower than that. Sometimes the display has patches of several windows all mixed up, zig zag patterns like a TV that is too far from a transmitter to receive a good signal and sometimes the mouse freezes in moving around. When I boot and don't start X, everything works perfectly, no delays, no messed up windows.
My video is ATI x1300 with Radeon driver. What is the best way to get the system to use only vesa, to see if that works, instead of ati or radeon? is possible to use grub.cfg or /etc/defaults/grub or /etc/grub.d/ ? I couldn't find any reports of problems with Xorg used by Squeeze, so it seems to be the ATi driver or the radeon driver.
View 3 Replies
View Related
May 20, 2011
I have an ATI Radeon 5850 card with 2 17" monitors, plus a 46" TV via HDMI (disabled, except for BD plaback under windows) under Debian 6.0/Squeeze. When I first installed this system, it worked fine with all 3 screens (only 2 enabled at a time). Sometime in the past few weeks though, it's decided to revert to a single-display setup. I can't find any errors in the logfiles, and it works perfectly fine when I re-enabled the secondary display via the ATI Catalyst Control center.
The auto-generated xorg.conf isn't configured to use the second display (even after re-generating one using "aticonfig -initial=dual-head"), and it is not being modified when I change settings in the Catalyst Control Center.Updating display settings after every boot is just a bit annoying.
View 2 Replies
View Related
Jun 19, 2011
Is it possible to display a thumbnail for the *.png image in Nautilus ?It works fine for *.jpeg, *.tiff,... What are the requirements to do that ? (librairies...)
View 4 Replies
View Related
Aug 11, 2011
sshd is openssh-server 1:5.5p1-6.
I'm getting "Can't open display" all the time when I log in the server through ssh.
penguin@theblue:~$ xeyes
Error: Can't open display: laptop:0.0
penguin@theblue:~$ export DISPLAY=192.168.1.101:0.0
penguin@theblue:~$ echo $DISPLAY
[Code].....
The problem I found is sshd server set DISPLAY to localhost all the time.
View 3 Replies
View Related
Apr 29, 2015
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
xrandr --output VGA1 --mode 1920x1200 --pos 3840x0 --rotate normal
xrandr: Configure crtc 2 failed
xrandr --output VGA1 --mode 1920x1200 --rotate normal --right-of LVDS1
xrandr: Configure crtc 2 failed
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 143521
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 5817108
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ....
View 2 Replies
View Related
Sep 9, 2015
I recently installed GNOME on my debian machine. I want to try using that as a second monitor for my windows 8 computer. I can't seem to find instructions on google, I want to try doing this wirelessy; is there freeware that lets me do this?
View 3 Replies
View Related
