Ubuntu :: Change Primary Display On Dual Monitor Setup?
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
ADVERTISEMENT
Jul 6, 2011
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
View 3 Replies
View Related
Sep 11, 2010
I run a dual-screen setup, and the installation detected both screens without troubleowever I want to change primary screen, so the panels and menus will be located in the biggest monitor.I am not able to do this in the System -> Preferences -> Monitors interface. Where can I do this simple operation
View 2 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Jun 12, 2010
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
View 1 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
May 21, 2010
I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.
I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.
View 9 Replies
View Related
Mar 9, 2011
So i was searching around my big desktop was working fine by default but I couldn't figure out how to switch my primary monitor and all the threads on this topic where real old and the fglrx drivers kept messing me up
so I went to my profile and showed hidden files and found a cool .xml file called monitors under .config
opend it up and chooses the primary monitor I wanted
very Nice Yes
View 1 Replies
View Related
Apr 8, 2011
I have google'd the crap out of this and have yet to find a "solved" forum. I currently have 2 sapphire ati 5770's in xfire. I also have two monitors. My (preferred) primary display has a dvi input and my other display is hdmi. I have them both plugged into only one of the cards. For some reason it keeps setting the hdmi display as the primary. And I want them in extended view. The ATI CCC suite does not support changing the primary monitor and I have tinkered with the xconfig but I do not really know what I am doing, so I have ultimately not been successful. here is my xorg.config file.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code]...
View 1 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Aug 30, 2010
New machine with an ATI 5770, with a fresh install of Ubuntu 10.04 (lucid, 64-bit). What a mess! As reported elsewhere, the initial install sometimes came up with a black screen, or corrupted displays, different each time. After several retries, I had a display that was corrupted but barely readable. The installed Ubuntu booted, but also had a corrupted display, just barely readable. I was just able to make out the hint that I should use the proprietary drivers, so I booted into safe mode and enabled them. Afterward, the display came up correctly.
This is ok for me, as a long-time Ubuntu user. But it really is like a trip back to the bad-old-days of Linux: you really cannot expect anyone but a geek to get through this. And the is the LTS version of Ubuntu? I use two monitors, to provide a double-wide single desktop. When I log in, the second monitor displays random noise, and is entirely unusable. I have to use System-Preferences-Monitors to switch the second display off, then switch it back on, and then everything works fine.
View 5 Replies
View Related
Jun 19, 2010
I loaded Lucid on my system, dual booting w/ win7. I have two monitors, and i need it to have extended desktop view. How do i enable this?
Here is my LSPCI
Right now my monitor dislay is not want i wanted.
View 1 Replies
View Related
Jun 29, 2011
I'm using the proprietery nvidia drivers on 11.04. I have a dual monitor setup with xinerama. The login screen appears to work fine, I can move my mouse between screens, and only one screen (right) has the login prompt. When I login, both screens show the same thing. While I can move my mouse across, I can only interact when it's on the left side.
I found this: [url], but I cannot start the display settings in the XFCE control center due to "missing randr extentions". Yesterday, I was using Kubuntu 11.04 on this same machine, and the dual monitor setup worked fine.
View 8 Replies
View Related
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Jun 15, 2011
I created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)
I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.
Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?
View 4 Replies
View Related
Jul 22, 2010
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
View 5 Replies
View Related
Mar 11, 2011
I am trying to setup a dual monitor on my system. I have gone through many posts and did the following.Downloaded EnvyNG to download relevant ATI drivers and eventually I got to a point where I can see that ATI is listed under Hardware drivers. But, from here, how do I actually set dual monitors?. I am looking for some interface like Catalyst, but couldn't find one after the drivers got installed. What am I missing here?I went back and forth, but after restarting the PC, the resolution goes to 800X640 and I have no option of setting dual monitors. I reset the options in /etc/X11/xorg.conf to let Ubuntu use the default drivers.
View 2 Replies
View Related
Sep 1, 2011
When ever I install the (recommended) drivers through the "Additional Drivers" interface to run Unity my dual monitor setup does not work. The monitors won't even detect correctly what so ever. Then, when ever I install (more basic?) nVidia drivers through the packet manager, my dual monitors work as planned, but now Unity won't work. What's the deal? Are there any work arounds for this?
View 4 Replies
View Related
Jul 12, 2010
I am Currently attempting to set up a Dual Screen setup at my work but seem to be having some strange results. For some reason the O/S is only recognising one of the monitors, it knows exactly what the Make and model of the monitor is but doesnt appear to know that there is another monitor plugged in. It constantly says that there is 2 screens plugged in but lists the second screen as "CRT-0" even if no DVI cable is plugged into the second screen. This has really troubled me and has really got me thinking. I have set-up other Dual-screen setups with exactly the same hardware previously and it has worked fine? I am using a Lenovo A58 Tower with an Nvidia Quadro FX-380 Graphics card that I know is capable of dual Dual-link DVI output! With 2 x LG W3000-H Monitors running Fedora 12.
View 1 Replies
View Related
Jan 13, 2010
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies
View Related
Feb 18, 2010
I've played around with a second monitor, but so far I haven't found a satisfying solution. I am using a laptop with a GeForce 9600M GS graphics card. I have managed to set up twinview, but my monitors don't have the same height so I'd rather have something like the "seperate x screen" option. Or how I imagine that option would be like. After some problems with the nvidia configuration tool (I couldn't change the xorg.conf, until I read this: [URL] I now have two separate screens, but the second one is all empty, with black background and X-shaped mouse cursor.
There seems to be no window manager running, I can start programs there with -display :0.1 , but they don't get any frame decoration and, which is worse, no keyboard focus. I'd be fine with a fullscreen konsole there, so I don't really need a window manager, but I do need access from the keyboard. I'd prefer a setup that would allow me to easily (without editing xorg.conf) switch between using both monitors and using only one, because I don't always use the laptop at home.
View 3 Replies
View Related
May 1, 2010
It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies
View Related
Mar 23, 2011
Right now, I need to use a dual-monitor setup. Be it for my casual desktop usage, or to my projects and programs presentations with a slideshow. The latter is critical and that's why I'm here.So, after some Intel Drivers update, some programs started to work nicely, faster and beautifully. But it corrupted my Dual-Monitor Setup. I don't know what to say, I'm totally desperate. I had to show one of my programs to my teacher using a projector, but with the dual monitor corruption, I called in sick today. I need to use the netbook screen to make changes on the program and the second monitor/projector to show the program working.
I'll show some pictures, but I'm without a camera right now, so I'll use one china-phone that's hanging around here to take a picture. Sorry for the quality. Both Monitors, you can see on the right of the bigger one the corruption I'm talking about.
[Code]...
View 1 Replies
View Related
Mar 22, 2016
I am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies
View Related
Sep 2, 2015
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
View 0 Replies
View Related
May 20, 2011
I'm trying to get an external monitor hooked up to my laptop with the intention to use both simultaneously using TwinView. Actually, I'm not "trying to make it work": everything works fine, using NVIDIA X Server Settings. However, when I reboot these settings are lost and I have to manually expand my desktop again.
I've found that running NVIDIA X Server Settings as root should allow one to "Save to X Configuration File", in order to let it automatically load the right settings. When I click this option, however, I'm asked to manually provide a file name with my home folder as the default location. I'm confused how to proceed - where should I save this configuration? Or should I be taking a completely different approach in the first place? (note: KDE 'Display and Monitor' doesn't work. Only when I use the NVIDIA-thingy KDE will recognize that my desktop is expanded to a 3600x1080 resolution)
View 9 Replies
View Related
May 6, 2011
I did set up dual monitors few times on few of my boxes, with 3 video cards :
Radeon 9250 AGP (have 2 of them) - with open source ATI driver
Geforce 6200 PCIE - with nouveau driver
In all cases I connect 2 LCDs. one 1440x900 or 1680x1050 to DVI and one 1280x1024 to VGA (all the cards have DVI and VGA out). The LCDs are the same ones tested with all cards :
1440x900 : Benq FP-92W
1680x1050 : Teac T2005L15 (identified as KTC2002 in xorg)
1280x1024 : Proview PQ-721KP
Tried on different boxes runnning Arch linux, different kernel / x / drivers / kde versions
Problem is - in all those setups, one monitor allways randomly blanks for a split second and comes back (incl. switching of the backlight, and displaying the "Source : VGA" or "Source : DVI" title as if it was switched off and on)
This happens randomly, but (more pronounced with the ATI cards) related to me clicking on stuff or the display changing (even if the changes are on the second screen)
With the Radeons only the monitor connected to DVI blanks. And the 2 radeons do it in different frequency, one is more often and one less
With the Geforce only the monitor connected to VGA blanks
When I test with 1 monitor (other one disabled in xorg) : Radeons sometimes still do that to DVI monitor but rare (much less than with VGA connected) (VGA monitor never blanks). Geforce does not do it at all and has problem only when 2 monitors are connected
I first thought its a hardware issue (the cards are from junk), but it happens the same with totally different hardware (exceps using same monitors) so i no longer think it is
There is nothing interesting in Xorg.0.log
View 2 Replies
View Related
Jan 12, 2011
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies
View Related
Aug 17, 2011
having trouble setting up a dual monitor from my Dell xps laptop using an HDMI port. It dual boots onto Ubuntu 10.04. The computer has a Nvidia GeForce GT 555M with Optimus graphics card I need to make sure I have not installed the restricted drivers. So I think what is happening right now is that the graphics are shown off the integrated graphics card. This is my output from <lspci | grep VGA>
Code:
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0dcd (rev a1)
The forum recommends to use this program called Bumblebee but I have had some issues with that in the past. Is there somehow I can setup my dual display while staying on Ubuntu 10.04 and not installing Bumblebee? I have researched into setting up dual display walkthroughs before but they all concentrate on nvidia or ATI configurations.
View 6 Replies
View Related
Feb 6, 2011
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
View 1 Replies
View Related
