The G4 has two cards with me only using one.Booting into Linux single then running Xorg -configure gives me the output on both monitors from both cards.Rebooting after this setup the mouse does not work. A hard reboot and a phigh reset the display previous defaults.Do I need to edit the xorg.conf.new or the xorg.conf?
xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
[code]...
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
xrandr --output VGA1 --mode 1920x1200 --pos 3840x0 --rotate normal
xrandr: Configure crtc 2 failed
xrandr --output VGA1 --mode 1920x1200 --rotate normal --right-of LVDS1
xrandr: Configure crtc 2 failed
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 143521
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 5817108
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ....
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
Suppose i'm this guy right there:[URL]..And all i'm used to seeing is this:[URL]..And clearly NOT this:[URL].. And my technical expertise dates back to early eighties, a few lines of x86 assembly and a few lines of C. And i haven't written a single line ever since (got bloody rich since win 3.1 shipped).
How can i get my gorgeous (20" portrait 30" 20" portrait) setup workin'? Just like in ol' good win xp - each monitor is handled like a separate entity not merged together in one big screen? A step-by-step guide would be perfect!
Both v-cards are ATI, supposedly working from the same drivers. I don't mind using a different linux distribution, if it makes matters any easier.
I have 3 monitors from left to right:1: dvi2: vga3: usb displaylinkBy default, the main ubunut screen shows up on the left #1 monitor.I tired swapping these around, ie going 213 but that messes it up. Is there a way to change the main listing|+menus to screen 2, which ius my middle screen? In Windows, this would be called the primary desktop.Secondly, how do I get screen 3 to work. Does it need a displaylink adapter for Linux?
View 5 Replies View RelatedI recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies View RelatedI'm currently running a three-monitor setup, two of the monitors being connected to an NVIDIA card, and the third being connected to the motherboard's onboard ATI adapter. This works, and it actually works quite well, but after installing the nvidia-current drivers (using the GNOME dialog), I am unable to get any video acceleration going. The GLX module doesn't seem to want to load, and while I'm actually quite impressed with the video performance I'm getting with the open-source drivers, I'd really like to have the OpenGL capability, as it does make things look prettier.
Relevant configs and logs are below.
I should clarify - I don't care about the 3rd monitor on the ATI adapter; I'm only concerned with getting OpenGL working on the two on the NVIDIA - if that's possible, which it may not be...
System:
Code:
xorg.conf:
Code:
I have a Radeon HD 5830, running 3 monitors on 10.10 64bit with the 10.6 video driver. The three monitors ( from left to right ) :
DFP1 : 1152x2048
DFP2 : 1920x1200
CRT1 : 1360x768
The problem I'm having is getting the middle monitor to be the primary one.
Running
xrandr --output DFP2 --primary
puts the panel on the middle screen but my docky and icons stay on the left screen. Flash videos also open up on the portrait left monitor which looks awful. Ideally I would like the icons on DFP1, docky on P2 and flash videos to open on P2. But I would definitely settle for everyone to be on the middle screen and drag it around as I please.
[Code]...
I've played around with a second monitor, but so far I haven't found a satisfying solution. I am using a laptop with a GeForce 9600M GS graphics card. I have managed to set up twinview, but my monitors don't have the same height so I'd rather have something like the "seperate x screen" option. Or how I imagine that option would be like. After some problems with the nvidia configuration tool (I couldn't change the xorg.conf, until I read this: [URL] I now have two separate screens, but the second one is all empty, with black background and X-shaped mouse cursor.
There seems to be no window manager running, I can start programs there with -display :0.1 , but they don't get any frame decoration and, which is worse, no keyboard focus. I'd be fine with a fullscreen konsole there, so I don't really need a window manager, but I do need access from the keyboard. I'd prefer a setup that would allow me to easily (without editing xorg.conf) switch between using both monitors and using only one, because I don't always use the laptop at home.
I am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies View RelatedMy laptop has a dual boot Debian + Ubuntu installation.
In particular I am using Debian 8.0 with stock kernel 3.16.0-4 (or equally 4.1.10 custom compiled, I tested it and it does not make any difference for the subject of this post).
Ubuntu is 14.10, with stock kernel 3.19.0-15.
In both installations I have nvidia nouveau drivers and intel integrated graphics drivers installed and loaded. This is the default for both installations.
In both installations I have xorg automatically configured (no xorg.conf file present in /etc/X11). In both systems the content of /usr/share/X11/xorg.conf.d is the same for what moitors are concerned (differences in mice and trackpad entries).
Unfortunately, the video configuration in Ubuntu 14.10 works out of the box. In particular I can plug in an external monitor/projector and it will fire-up the nvidia card (nouveau drivers) to power that monitor.
Debian 8.0 on the other hand does not even detect the external monitor.
I don't know where to start to solve the problems.
The hardware is as follows: the laptop (lenovo W530) features both an Intel integrated graphics card and an Nvidia K1000M. The VGA port is connected only to the Nvidia card (this is according to my online research, as I don't know how to check this).
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
Just got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
View 2 Replies View RelatedI'm a newcomer to Linux and so I apologize in advance for my question (that may be a newbie's question indeed).I've just changed my system from Lenny and installed the newest version of Squeeze ( X.Org X Server 1.7.7, Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian).When adding a second monitor (smaller with different specs) I get the same resolution on both screens--that of the smaller one.
View 3 Replies View RelatedHow could xorg be set-up such that different monitors work with different DPI but still compose the same extended display?
I have a 15 inch laptop display extending to the right the main display which is 23 inch. The resolutions are comparable, but the difference in pixel size is very large. Thus, either the external display has too large fonts and UI, or the laptop one has them very small. Moving them at different distances is not entirely possible.
xrandr info:
eDP1 connected primary 1920x1080+2048+0 (normal left inverted right x axis y axis) 344mm x 194mm
VGA1 connected 2048x1152+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
I heard that Windows has a hack (which I can't check) for extending displays with different pixels sizes: it computes in which of the displays a window has most of it's surface and sets the DPI for that window based on that. Thus a window will change DPI when crossing monitors, (and will look too small/large on one of the monitors if it is in the middle).
I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
View 1 Replies View RelatedI don't know how to stop this monitor standby thing. When I'm not using the computer, the screensaver will start after a few minutes, what I want. But after a few minutes then, it'll go black. How can I stop this from happening?
View 12 Replies View RelatedI recently installed GNOME on my debian machine. I want to try using that as a second monitor for my windows 8 computer. I can't seem to find instructions on google, I want to try doing this wirelessy; is there freeware that lets me do this?
View 3 Replies View RelatedIn Debian Jessie Gnome with two screens, I would like to execute
xrandr --output HDMI1 --primary --right-of eDP1
xrandr --output eDP1 --rotate left
prior to showing the GNOME user logon screen. Unfortunately, all information I seem to be able to find on this appears to be relevant for pre-systemd Linux only.
The situation is that I have two monitors: One small tilted monitor on the left with 1024 x 768 which should be secondary and one larger landscape monitor on the right with 1920 x 1080 which should be secondary. Everything works persistently AFTER a user has logged on. However, after booting the system or after changing users, the small monitor becomes primary so (a) the user needs to logon using that monitor and (b) as the monitor is physically tilted, one needs to tilt the head to read it wihtout the xrandr commands.
If I can get beyond this issue, there is a second issue: While one can pick the primary and secondary monitor in Gnome, monitor numbers 1 and 2 seem to be fixed. This becomes a problem when using freeRDP to connect to a Windows server with dual monitors. Then, the smaller, secondary monitor is number 1 and thus, it is the Windows logon and primary screen. Is there a way to switch numbers 1 and 2 in Linux, for example somewhere in the grub configuration?
I have a laptop connected via HDMI port to different external displays throughout the day. I have configured the displays (Settings > Displays) to turn off the laptop display and set the external display as primary. However, this setting only takes effect after login. Thus, I am unable to see the login screen greeter on my external display because I close the laptop lid, so I am logging in blindly to a gray login screen background.
he issue I am facing is that when I start the laptop with an external display connected, the greeter only appears on the laptop display. The gray login screen background image spans both laptop and external displays and my mouse pointer appears on both displays, so I know both displays are detected and configured as dual displays. But, I am guessing, the laptop display is set as primary while the external as secondary.
I would like to know if there is a way to dynamically switch the greeter between the two displays, regardless of which one is set as primary and secondary. Or, is there a way to configure the system such that if there is an external display connected via HDMI, then it is set as primary, and if no external display is connected, then the laptop display is set as primary?
I have searched all over the net and this forum to no avail. I read a post which required copying the user's ~/.config/monitors.xml file over to /var/lib/gdm/.config/ but this caused my laptop monitor to be turned off at login even when there was no external display connected.
Hardware: Acer Aspire 8730G, Core 2 Duo T9900, 8GB RAM, Nvidia Geforce 9600M GT.
Software: Debian 8.4 Jessie, Gnome 3.14.1, Gallium 0.4 on NV96 (I am assuming this is the Nouveau driver)
Contents of the /etc/X11/xorg.conf file which I generated with the command "Xorg -configure" as root in console mode:
Code: Select allSection "ServerLayout"
  Identifier   "X.org Configured"
  Screen   0 "Screen0" 0 0
  InputDevice  "Mouse0" "CorePointer"
  InputDevice  "Keyboard0" "CoreKeyboard"
EndSection
[Code] ...
I suppose I will continue to login without seeing the greeter on my external display.
I managed to install Jessie on my new Lenovo Ideapad 100 and have been trying to put the finishing touches on it. I downloaded FDPowermonitor and the icon showed up right away. Then after a few minutes it went away and hasn't shown back up.
I think I need to modify /etc/xdg/lxsession/LXDE/autostart to include @fdpowermon but I cannot figure out how to have the permission and use a editor I understand.
I just log into LXDE with root... but there has got to be a better way yes? But that didn't work anyway...
I recently got a new external monitor for my laptop, and connected them by VGA. This is what 'xrandr' tells me:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.0 +
1600x1200 60.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9*
1280x960 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
However when I try to change to some of the higher resolutions, such as 1920x1080, all I get is a corrupted and flickering image. As indicated above, I am currently on 1440x900@59.9h,z but for some reason 1440x900@75hz doesn't work. The same seems to be true for 1280x1024. The three resolutions above that all cannot be selected properly. I tried setting the resolution to maximum in Windows XP and it worked, and my video games console can set it to 1080p, so I don't think there is anything wrong with the monitor. Is there anything I can do or is this some kind of bug or limitation of the graphics driver or something? The graphics chipset of the laptop is an Intel 945GM, which I believe should be capable of displaying 1920x1080. I am running debian unstable with what seems to be the most up to date version of xserver-xorg-video-intel.
Where the script is for Gnome 3. When I plug the HDMI cable, the desktop expands to include both, but disables the backlight on the laptop monitor. I have to restart gdm3 or the laptop for the brightness control to bring it back up. First, why would it turn brightness to 0, and how do I change the default of that so it stops. I plug and unplug the HDMI regualarly while I wait for a new desktop and the laptop has to pull double duty.
I just switched from Ubuntu 14.10. It never blacked out a screen on plug in or removing. That means that there must be some way to do it, however, it used Unity and this is Gnome 3.
I installed KDE. It works as well. I will use it for now, but would like to get Gnome 3 to work. My default is gdm but I think I saw I can switch it to kdm.
I've a high resolution monitor(2560x1440) on my laptop running Debian testing and would like to change the font size in X. I manage to change most of the fonts to a readable size through the openbox configuration manager. But the font in my login window and for example in apps like vlc is still very tiny. How this could be changed ....
View 2 Replies View RelatedI just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
View 1 Replies View RelatedI am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
I have a Dell XPS M1330, which has a GeForce 8400M GS GPU. The binary (sigh) nVidia driver installed is version 190.53 (installed by sgfxi). This is working well: glxgears gives me about 2600 FPS and compiz is happy.An old Philips 170B is attached by VGA cable. I was looking to set up a method of switching resolution upon connecting to the monitor when working at the desk, since I don't like the 1280x800 resolution of the laptop.
nfortunately, I can't get any output on the external monitor. It does work under Ubuntu, which installed the 180 series binary driver. (Going to an earlier driver is an option, but I want to understand the problem.) Bottom line, I want to work under Debian.As far as I know, nVidia's proprietary driver doesn't support xrandr. At any rate, with he external 170B monitor attached and turned on, I get the following:$ xrandr -qScreen 0: minimum 320 x 175, current 1280 x 800, maximum 1280 x 800default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0*
1024x768 51.0 52.0
960x540 53.0
[code]...