Ubuntu :: Edit Xorg.config File For 1680x1050 Monitor
Aug 15, 2011How do I edit this file to include 1680x1050 resolution?
View 9 Replies
ADVERTISEMENT
Fedora Installation :: FC12 4 Monitor Video - Edit The Config File And Make To Other Two Work
Feb 9, 2010I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedFedora :: NVidia GeForce FX 5500 - Resolution Degraded To 640x320 - Cannot Edit Xorg.config
Feb 11, 2009There I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.
View 6 Replies View RelatedUbuntu :: Get 1680x1050 With Nvidia On HP Monitor?
Sep 15, 2010I'm trying to help my brother get his monitor to display the correct 1680x1050 resolution. He just installed Ubuntu because he was getting a blue screen with windows. If I can't help him fix this I'm sure he'll decide Ubuntu sucks and go right back to windows
View 2 Replies View RelatedUbuntu :: Edit The Xorg File In Kubuntu?
Apr 18, 2010I want to edit it so I can do this: [URL]
View 2 Replies View RelatedFedora :: Edit Sudo Config File
Mar 3, 2011edit the sudo config file to allow my account to use some commands as a root.so can someone advise me how should i do it.
View 3 Replies View RelatedGeneral :: Edit The Config File Of An Application?
Aug 20, 2010I want to edit the config file of an application I have installed and the documentation says that the config file is per-user and therefore stored in "~/". Which folder is that? The app itself is installed in "/usr/local/bin/".
View 5 Replies View RelatedGeneral :: Edit The Config File To Show All IP's And Host?
Jul 19, 2010Having a problem in my awstats, I'm a little lost to were to edit the config file to show all IP's and host so far its only showing up my IP and the PC's on my network and nothing else.
View 5 Replies View RelatedRed Hat / Fedora :: Setting Up Permanent Resolution In Xorg Config File
Mar 29, 2010I am trying to set up a permanent resolution in the xorg.conf file. At the moment whenever I reboot the machine the resolution defaults to auto. How I can change that to be constantly at 1600x1200?
Here is my xorg.conf file.
Code: # nvidia-xconfig: version 1.0 (buildmeister@builder62)
Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "stylus" "SendCoreEvents" # Added
InputDevice "eraser" "SendCoreEvents" # Added
InputDevice "cursor" "SendCoreEvents" # Added
InputDevice "pad" "SendCoreEvents"
EndSection .....
Ubuntu Installation :: Unable To Open X Config File '/etc/X11/xorg.conf' For Writing?
Apr 21, 2010When trying to conigure via nvidia-setting using root (sudo) and then saving to config file I get the ' Unable to open X config file '/etc/X11/xorg.conf' for writing.' in a message box - below is what i get on terminal:
Code:
Traceback (most recent call last):
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 75, in <module>
operation_status = main(options)
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 51, in main
[Code]...
Fedora Installation :: 2 HDs And Dual Boot - How To Edit Grub Config File
May 18, 2011I have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
Hardware :: Monitor Dual Head Top Down Display Config File Settings?
Jan 13, 2010I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies View RelatedUbuntu Multimedia :: Generic Vesa Driver Xorg.conf File That Will Work With Most Any 1024x768 Monitor
Feb 12, 2010I am looking for a generic vesa driver xorg.conf file that will work with most any 1024x768 monitor.
This is for a network appliance and our field people have many different type of monitors.
This product will mostly be used "headless" but sometimes our field people will plug in a monitor.
The intel driver will not even start x without a monitor plugged in so I found it necessary to go to the vesa driver.
Code:
Ubuntu :: Xorg Doesn't Detect Monitor / Won't Display Higher Than 800x600 On A 1400x900 Monitor
Apr 3, 2010I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
Ubuntu :: Edit File Inside It, Open It, Edit A File, Then Remake The Bin File?
Mar 3, 2011I have a linux.img image for ubuntu.I want to edit file inside it, how can open it, edit a file, then remake the bin file?
View 7 Replies View RelatedHardware :: Dual Monitor - 2nd Monitor Not Coming Up - Xorg.conf Missing Something?
Oct 19, 2009This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
CentOS 5 Hardware :: Centos 5.4 Hardware - Display Driver Not Support And Also Missing Xorg.config File?
Jun 15, 2011I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
Ubuntu :: Modified /etc/X11/xorg.config - Now No GUI
Aug 18, 2010I was trying to disable touchpad click, added a section to /etc/X11/xorg.config, and now the OS never starts up, the laptop just runs... This is my second day with the machine, I've done a ton of setup but haven't yet setup a backup utility... is there any way for me to just go in and change the file back to the way it was?
View 3 Replies View RelatedFedora :: How To Edit Xorg.conf
Sep 2, 2010Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies View RelatedUbuntu :: Unable To Edit Either Fstab Or Xorg.conf
Feb 13, 2010I am running Ubuntu 9.04 on an Acer Aspire laptop and have broken my display system while trying to use the restricted drivers for the nvidia graphics card.
Basically I downloaded and activated the restricted driver. I rebooted and now ubuntu freezes on startup.
I can get access to the command line but am unable to edit either fstab or xorg.conf because ubuntu has mounted the filesystem in read only mode.
I have read and tried all the options given in this posting [URL] but because I cant read or write any of the files I cant seem to affect any change to the system
Fedora :: How Edit Xorg.conf In Terminal
Aug 13, 2010What is the command I use to edit the xorg.conf in fedora?
Achieve using the following command:
Ubuntu Networking :: Network Config - Edit Connections
Jun 14, 2011Using xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies View RelatedFedora Installation :: How To Edit Config.sh
Nov 11, 2010I am configuring a third party repo (Project fog).Actually i need to know ,How to edit config.sh
The error i am getting is > Checking package: php-gettext...Failed!
The manual say that .
It is a part of the base PHP package. You will need to edit /lib/redhat/config.sh & remove php-gettext from the packages list on line 22 .
Ubuntu Multimedia :: Can't Detect TV In NVidia-settings With Xorg-config
Feb 14, 2010I have connected my computer to my LCD-TV (HDMI-cable) to enjoy my movies and such, on a big screen. I have nVidia GeForce 7050 so in nvidia-settings I've been using the TwinView configuration which allows me to see both the monitor and the TV.
There was a bit of trouble-shooting but it worked just fine until yesterday when I changed my monitor to a new one and on the way probably messed up in nvidia-settings. I thought it would be easy to fix it but the configuration (in nvidia-settings) is stuck on "separete x-screen" and doesn't allow any changes at all. When I hit the "Detect display" nothing happens although I have the TV connected!
Maybe my xorg.config could tell somebody what is wrong. I've been messing around with the file and made lots of changes acc to different advices but I really don't understand the options and settings so I'm afraid I'll soon do something inreperable.
[Code]...
Ubuntu Multimedia :: Can't Change Primary Display With Ati Ccc Or Xorg.config?
Apr 8, 2011I have google'd the crap out of this and have yet to find a "solved" forum. I currently have 2 sapphire ati 5770's in xfire. I also have two monitors. My (preferred) primary display has a dvi input and my other display is hdmi. I have them both plugged into only one of the cards. For some reason it keeps setting the hdmi display as the primary. And I want them in extended view. The ATI CCC suite does not support changing the primary monitor and I have tinkered with the xconfig but I do not really know what I am doing, so I have ultimately not been successful. here is my xorg.config file.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code]...
General :: Big Fonts After Xorg.conf Edit - Slackware 12.2
Mar 9, 2010After i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]
View 2 Replies View RelatedGeneral :: Lilo.config Edit Did't Take New Settings?
Feb 22, 2010I have edited /etc/lilo.conf file and changed timeout setting to 30 (in tenth of seconds so 3 seconds) but when I reboot old value - 2 minutes is displayed.Is anything else I need to change?
View 1 Replies View RelatedUbuntu :: Ati Drivers Black Screen - Back To Vesa But No Xorg Config?
Dec 4, 2010Was trying to play some new games, so was trying to install the ati drivers for my x15xx or something card.
anyway i am using ubuntu 10.10, so was having to try force them, using 9.10 config or something.
anyway got it installed, restarted and I get black screen have been trying to go back to "vesa" drivers or something. but been having no luck
I do not have a "/etc/X11/xorg.conf". and I cannot seam to make 1 using stuff like aticonifig --initial --input=/etc/X11/xorg.cong or anything like that
I am really stuck, even using dpkg-reconfigure or something didnt make the X11 conf
General :: Cannot Edit Xorg.conf To Fix - Input Unsupported - Message
Jul 10, 2011I am trying to install debian as a DC but on reboot I get the "Input not supported " error. I switched to virtual input and login to try to edit the xorg.conf file but created a new file instead because the xorg.conf file is open by the installation. How do I close it so I can edit it and continue. I am afraid to start a new file as I am not sure what is in the ools one.
View 2 Replies View RelatedSlackware :: Use Either Iwconfig Or Wpa_supplicant And Edit The Corresponding Config Files?
Jun 3, 2010My brother is thinking of installing Slackware64 13.1 on his laptop. He was wondering though how to configure his wireless card. How would he do this? He is using an Intel wireless card, but I am unsure of the exact model. Another question is would Wicd do this automatically or do you still have to use either iwconfig or wpa_supplicant and edit the corresponding config files?
View 4 Replies View Related