Ubuntu Multimedia :: Can't Detect TV In NVidia-settings With Xorg-config
Feb 14, 2010
I have connected my computer to my LCD-TV (HDMI-cable) to enjoy my movies and such, on a big screen. I have nVidia GeForce 7050 so in nvidia-settings I've been using the TwinView configuration which allows me to see both the monitor and the TV.
There was a bit of trouble-shooting but it worked just fine until yesterday when I changed my monitor to a new one and on the way probably messed up in nvidia-settings. I thought it would be easy to fix it but the configuration (in nvidia-settings) is stuck on "separete x-screen" and doesn't allow any changes at all. When I hit the "Detect display" nothing happens although I have the TV connected!
Maybe my xorg.config could tell somebody what is wrong. I've been messing around with the file and made lots of changes acc to different advices but I really don't understand the options and settings so I'm afraid I'll soon do something inreperable.
[Code]...
View 5 Replies
ADVERTISEMENT
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Feb 11, 2009
There I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.
View 6 Replies
View Related
Feb 3, 2011
I just bought an LG E2250V Monitor that I'm connecting to my laptop with the VGA port, my laptop is equipped with the cardCode:01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)However nvidia-setting is able to detect resolution only up to 1024x768, I can't get higher than that, and it doesn't even display the monitors name.Information:
Operating System: Linux 2.6.35.10-74.fc14.x86_64
NVIDIA Driver Version: 260.19.29
Server Version Number: 11.0
[code]....
View 4 Replies
View Related
Oct 16, 2010
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
View 1 Replies
View Related
Apr 8, 2011
I have google'd the crap out of this and have yet to find a "solved" forum. I currently have 2 sapphire ati 5770's in xfire. I also have two monitors. My (preferred) primary display has a dvi input and my other display is hdmi. I have them both plugged into only one of the cards. For some reason it keeps setting the hdmi display as the primary. And I want them in extended view. The ATI CCC suite does not support changing the primary monitor and I have tinkered with the xconfig but I do not really know what I am doing, so I have ultimately not been successful. here is my xorg.config file.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code]...
View 1 Replies
View Related
Jan 19, 2010
A few months ago my monitor broke and began using an old one that does not have EDID.Since then i havent been able to configure my computer with a stable video configuration.I`ve tried a thousand times to edit xorg.conf and i actually got it let me use resolutions higher then 800x600, but when i reboot my computer my usuall setting 1024x768 gets switched back to a lower one - its a pain... my icons get scrambled, the gnome panels, etc.Do I need to edit any other file then xorg.conf?
And another thing I noticed today is that the gnome display manager does not recognise the higher resolution of nvidia-settings. Does it have a seperate settings file?
View 1 Replies
View Related
Jun 19, 2011
I'm running debian 2.6.32-5-amd64 and have spent an interesting day trying to get nvidia-glx running...What appears to be happening, is that installing nvidia-glx uninstalls X.I've tried various installation methods (Synaptic, apt-get, module-assistant) and the final result seems to always be /usr/bin/X not found.Re-installing X blows away nvidia-glx.The symptoms look a lot like this post: viewtopic.php?f=7&t=45188Is it possible that this problem has returned?
View 10 Replies
View Related
Jul 26, 2011
i updated my nvidia driver im running ultimate gamers edition 2.6 and now it only boots as far as terminal 1. i am a newbie and am completely lost. of course i have searched google high and low and seems to be a common problem however i have tried editing the xconf/xorg cnt remeber the name iv tried using the restore mode which is second on the boot list and have tried using the live cd to boot into graphics mode none seem to do the trick through using the live cd or something as the commands for the terminal are a pain for me also i would put up the xconf file up but i only no how to view it through the cd i dnt no how to copy it to usb to place on here
View 5 Replies
View Related
Aug 7, 2015
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
Code: Select alldaniel@Daniel-PC:~$ glxinfo | grep rendering
direct rendering: Yes
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_buffer_object, GL_NV_polygon_mode,
xorg.log: [URL] ....
dmesg: [URL] ....
system:
nvidia gtx 760
intel xeon e3-1230v3
View 1 Replies
View Related
Jun 30, 2010
I'm running dual-screen. On 24" at 1920x1080 and one 19" at 1440x900. After installing Mint 9 I can't set the resolution any higher than 640x480 in nvidia-settings. I've installed the "recommended" nvidia-driver that Mint suggests.
[Code]...
What could be the problem? Why can't I set the res higher than 640 in nvidia-settings? Everything worked in Mint 8 (10.04). During installation the res was higher than 640.
View 4 Replies
View Related
Jan 31, 2011
I have 2 monitors, a 22 inch samsung as my main and an acer as my alt. I am trying to get the samsung monitor to display, but is is disabled. So I enable it as a separate x display, then save, but when I restart x, the settings didn't save. I save the config under under /etc/X11/xorg.conf. What am I doing wrong?
View 4 Replies
View Related
Feb 5, 2011
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies
View Related
Jun 19, 2011
Yesterday I played a little with a Bitcoin miner and discovered today that I must have scambled my 3D settings. My Intel graphics card doesn't seem to work, instead I must have added a nVidia Settings Manager to my menu.
I already removed the package I mistakenly installed (something concerning OpenCL) but nothing happens. The xorg.conf file seems to be okay.
Gnome now only starts in 2D mode and Unity refuses to work at all. how I might get my Intel card back working?
View 1 Replies
View Related
Jan 21, 2010
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
View 6 Replies
View Related
Feb 23, 2010
I have a Dell E6500 laptop (1280x800 screen), which I frequently dock.The dock as two Dell 1908FP 20" monitors connected by DVI. I can move between the laptop display and the twins by manually changing display configuration in NVIDIA X Server settings, but this is a pain requiring about 15 clicks each time.
I have tried using the "Save to X Configuration File" option in the Nvidia server settings, but this seems to screw everything up. I need to dynamically change between the setups... anyone have advice on getting that done?Can the xorg.conf file be configured to do it?My xorg.conf looks like this:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24[code]......
View 5 Replies
View Related
Dec 11, 2010
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
View 6 Replies
View Related
Mar 8, 2011
My screen displays everything in a very wide but also very short way. When i click on (X Server Display Configuration) NVIDIA X Server Settings
I get this:
View 1 Replies
View Related
Jan 24, 2011
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies
View Related
Apr 16, 2010
I run Ubuntu 9.04 on with proprietary NVidia driver 180.44.When I change anything in the nvidia-settings, e.g. screen resolution, brightness, second screen etc, everything works fine - except for the fact that I can't play any video files in any player. Sound is there, players don't display any error messages, but the image is black. Flash video within browsers is fine, though.Things go back to normal with the new settings kept after restarting X. However, having to restart X and lose my desktop set up every time when I just want to connect my laptop to my office screen is highly inconvenient.Is this a bug or expected behaviour that I have to live with?
View 3 Replies
View Related
Jan 22, 2010
I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
View 1 Replies
View Related
Dec 12, 2015
I had some issues with nvidia drivers, and removed all of the packages using
Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*
Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....
Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
As a result, my nvidia preferences aren't saved across reboot.
Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main
[Code] ....
System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2
View 6 Replies
View Related
Aug 21, 2010
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies
View Related
Aug 18, 2010
I was trying to disable touchpad click, added a section to /etc/X11/xorg.config, and now the OS never starts up, the laptop just runs... This is my second day with the machine, I've done a ton of setup but haven't yet setup a backup utility... is there any way for me to just go in and change the file back to the way it was?
View 3 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Feb 6, 2010
I have upgraded from 5.2 to 5.4....I now have no mouse xorg can't detect it. Strange how the mouse works on all my other PC and in 5.2 but now it doesen't
mice: PS/2 mouse device common for all mice
logips2pp: Detected unknown logitech mouse model 1
I have created a generic file /etc/sysconfig/mouse
FULLNAME="Generic - 2 Button Mouse (PS/2)"
MOUSETYPE="ps/2"
XEMU3="yes"
XMOUSETYPE="PS/2"
View 1 Replies
View Related
Sep 16, 2010
In nvidia-settings I see, alongwith Disabled and TwinView settings, "Separate X Server". I tried choosing the option for my LCD (connected via HDMI), but I get a blank screen, presumably since the LCD's X server has nothing to render.
How do I direct any application (say vlc) to use that X Server instead of the Monitor's X server?
View 1 Replies
View Related
Aug 15, 2011
How do I edit this file to include 1680x1050 resolution?
View 9 Replies
View Related
Oct 8, 2009
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
I have followed the guide to install ATI proprietary drivers using RPM Fusion.
View 3 Replies
View Related
Jan 25, 2010
First off my monitor is a 720p plasma, native resolution is 1024x768 and yes it's 16:9. Video is onboard ATI 4200 (AMD780G). and I've tried the fglrx, ati, and radeon drivers. So I would like my dpi settings to reflect that the pixels are longer horizontally (that there are less of them)
So i've been changing DisplaySize, and tweaking X with other options like [Option "NoDDC" "true"] etc. Nothing seems to change the display.
So then I check xdpyinfo and it reports what I have in X and it's what i've configured.. So I try wiping out X and seeing what it picks up and what do you know, it's auto-detecting everything fine.
Code:
screen #0:
dimensions: 1024x768 pixels (160x90 millimeters)
resolution: 53x95 dots per inch
So the problem, it's not using these settings. I can change the DisplaySize to 1000 10 or 10 1000 and the display does not change, but xdpyinfo does correctly report what I've entered.
View 3 Replies
View Related
