I've just installed the proprietary ATI drivers from the AMD website and that all went fine. After that I restarted my pc and executed the following in the terminal:
Code:
atiode -P60 -H localhost:0; echo $?
However, that returns 2 which means that a render error occurred. Also, OpenGL reports that shaders are not supported.
I just upgraded from FC8 (32-bit) to FC11 (64-bit). In doing so, I backed up my entire World of Warcraft folder so I could try to avoid having to download and install it all over again. However, I've now reinstalled wine (64-bit now), and the nvidia drivers from the rpmfusion repos (also 64-bit), and when I try to start WoW, it says it cannot load OpenGL. I'm wondering if anyone knows what's up, and if there's a solution that doesn't involve reinstalling WoW.
View 7 Replies View Relatedanyone know about a driver to the hp scanjet 4890. i am running ubuntu 10.4 lts. i have heard that there is no driver for linux for that scanner, but those posts were old.
View 1 Replies View RelatedI just upgraded to 10.04 on my Dell optiplex GX280 and now OpenGL isn't working (xbmc and cairo dock won't start). Here are the (i think) relevant lines from lspci:
[code]....
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
I was configuring mythtv and when I was in the video settings I set it up to use OpenGL. Now I can no longer see video and I can't get back to the settings screen to disable OpenGL. Is there a config file that I can edit to disable OpenGL or someway to revert everything back to default. I tried completely removing the frontend and reinstalling it but that didn't do anything.
View 2 Replies View RelatedI have a tightvnc server running on my computer and have my IPAD using a vnc client to connect to it. Everything works fine except for apps that require openGL (eg: minetest,steam). I was wondering how I could use said apps over vnc.
View 11 Replies View RelatedI'm trying to span my desktop across my 2 displays. I tried to edit xorg.conf-vesa to no avail.
Here is xrandr:
bash-3.1$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1600
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0*+
1680x1050 59.9
[code]....
I have attached a portion of xorg.conf-vesa and xrandr --verbose.
n OpenGL not working with fglrx drivers?
View 1 Replies View RelatedI'm trying to work with the robocup simulator (SIMSPARK), but it doesn't work. Really i don't know why.
The terminal show me the following error and i think that the problem is from UBUNTU and OPENGL :
Anyone know a good screen recorder than can record OpenGL games with little or no lag? All the ones I've come across are old and won't compile on newer versions of Ubuntu.
View 1 Replies View RelatedI'm using currently ubuntu 10.10. Having a nvidia gt220 with the proprietary drivers. I used compiz for a while. It works quite well, with vsync on and so on. But one thing bothers me all the time: In any opengl program (like a game or the unigen benchmarks) or on video playback (no matter if its the default video player, xbmc or what ever) I see some kind of stutter. About every second or so it jumps one frame forward and then two back. Till the next second it plays fluid.
To be able to observe this easily you need a video (or a opengl scene) where the whole screen scrolls in a medium speed but smooth. Than you can observ how it "jumps" every second. If the scrolling is too slow you wont observe it. Now, if I turn composite off this disapears. All play fluid. Ofcourse I get tearing as long as I do not also disable the composite extension in the xorg.conf, but this is another story. Is there a possibility to fix this stuttering with compiz active? Cause I use this pc to watch movies quite often so this would render compiz unusable.
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
I'm running Debian Lenny with GNOME on a ThinkPad T43. Some OpenGL apps like the game Trigger run great, while others like Stellarium crash my system beyond recovery. I get a black screen, I can see the mouse cursor and move it at a very slow speed, but nothing else. I can't switch to a different terminal or restart X with ctrl-alt-bksp.
I assume that the problematic apps do not like the laptop's integrated graphics chip? Is there a way to know ahead of time what apps might be troublesome, before actually running them? I hate hard resets.
When using the very nice opengl screensavers, rss-glx, etc. the screensavers are very choppy.I tried modifying my xorg.conf but still no go.Anyway to get the rss-glx screensavers to run at normal speed?I read online that Intel disable the hardware acceleration.This is a work laptop but I just wanted to see if I could get it going.
View 11 Replies View RelatedIt stretches the parts of the 3d object to the sides of the viewing area. This makes Google Earth almost impossible to use. I have a video of Google Earth's problem here: [URL] Here's a screenshot of it in GLChess: screenshot_001.jpg I am running Ubuntu 10.06 Lucid Lynx on an old HP dv5000 laptop. It has ATI Radeon graphics.
View 2 Replies View RelatedI installed XMBC and i keep getting this message "Error XBMC needs hardware accelerated OpenGL rendering. Install an appropirate graphic driver" i have a radeon 5750 hd graphics card. i updated the drive thru the website. but i keep getting this message.
View 4 Replies View RelatedNew here so please go easy. I am trying to get OpenGL running on Ubuntu 10.04 (64 bit). The hardware is a Dell box with a NVidia Quadro 600 graphics card; I am also running under VMware.
I tried using "apt-get install nvidia-current", followed by "nvidia-xconfig", which told me a new xorg.conf file had been written. I then rebooted. A dialog appeared saying Ubuntu is running in low-graphics mode and that it had failed to load module "nvidia" and no drivers available.
As I didn't seem to get very far this way, I tried downloading the NVidia 64 bit linux driver version 275.09.07 and ran this from the console. Firstly it told me that I do not appear to have a NVidia GPU supported by this version of the driver (yet NVidia's description of the driver says it does support this gpu). I went ahead and let it try to build the kernel module but then it failed with the message "failed to load kernel module 'nvidia.ko" I'm not clear how to proceed on this one. Has anyone else got a Quadro 600 card to work? If so, how?
I have openGL working fine on my system.The only problem is that when I try to run the executable file, nothing appears unless the full scene has been rendered.In fact, it appears in parts, i.e. updates after a second, then after another second etc...However, earlier, the rendering used to be continuous and I could see each pixel getting rendered in a continuous fashion.
View 3 Replies View RelatedWhenever I try to start an OpenGL app in the terminal, I get a message to the point of "could not create GL context." It was working until around the last update. I know it's not a hardware problem because my windows partition works as well as ever.
I'm using Hardy Heron with the closed Nvidia driver with a Geforce 9800gt
'glxinfo | grep OpenGL' gives
Code:
Error: glXCreateContext failed
I'm trying to run a program called Alice 3.0. When I load the program, it crashes at the splash screen. I ran it in terminal, and this is the error message I received:
UNABLE TO LOAD OPENGL The most common reason for this is an incorrectly set Java library path. Please update your VM arguments. The text below has been copied to the clipboard for your convenience. Linux-i386
all properties
--- ----------
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
[code]...
I'm trying to install Kicad from source but cmake gives me an error:"- Check for installed OpenGL -- not foundCMake Error at CMakeModules/CheckFindPackageResult.cmake:6 (message): OpenGL was not found - it is required to build Kicad "I have an Nvidia video card with the proprietary drivers installed.I also have glut, (glutg3) installed.I don't understand why cmake can't find OpenGL.
View 9 Replies View RelatedOpenGL is not working on my installation. I'm completely new to Linux and have been trying to get it to work for hours, but whatever I try, it just doesn't work. When I try to load java applets which use OpenGL, the applet crashes with this error:
Quote:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xb7895424, pid=3239, tid=1586695024
# JRE version: 6.0_22-b04
# Java VM: Java HotSpot(TM) Server VM (17.1-b03 mixed mode linux-x86 )
# Problematic frame:
[Code]...
I was trying to get a game to work (scorched 3d) but I kept getting a resolution error. So I did some looking around and found that I had to do something with xorg.conf in /usr/bin/x11 (if I remember). Well I didn't have that file, so I installed a program that had it (and for the life of me, I don't remember what it was). Long story short, I tried to run a different game (foobillard) and it wouldnt run. So I ran from terminal and got an error saying that x11 is not configured with opengl. Now I am mad cuz that was my favorite game. Is there a way to reset x11 and opengl without losing everything?
View 2 Replies View RelatedI play RuneScape most of the time i'm on the computer and i always keep an eye on the performance. Yesterday and the days before, everything was going good, cpu usage it was causing was between 30 and 60%, now it wont go below 70%. It's always 70-99% for some reason :s i have set settings for graphics to OpenGL (they were like that before too with no problem) and it started causing high cpu usage. If i set it to Safe Mode in graphics settings it gets 100%, I never tweaked the drivers, i have a NVIDIA GeForce 9600 GT, i have the opengl thingies installed along with my nvidia driver. Ubuntu 10.10 32bit.
View 1 Replies View RelatedI need a driver for 10.04 that supports OpenGL, cause in my games i'm unable to do anything with opengl, it just swaps me to d3d..
View 4 Replies View RelatedI'm trying to find a 64 bit version of OpenGL for Linux. I tried driver from Nvidia, but it turned out that it required a specific graphics card, (which either I don't have, or VMware has trouble noticing that I do. I have a laptop with some Nvidia, Geforce with Cuda card.
In any case, I just need to find 64bit OpenGL for Ubuntu 10.04. I keep finding 32 bit versions, or other versions that don't apply to me.
I'm still kind of new and it's possible that I haven't been looking the most effective places. I tried google and sourceforge, but I couldn't quite find it.
If anyone knows where I can get it, or knows of a better place to look, I would be very grateful.
P.S. I also tried the package manager and the OpenGL site.
I have been using EnvyNG for my nvidia 9600 for a few ubuntu versions now, but cant find envy after doing a clean install of lucid. When I installed lucid and added the sources, Envy is not there. Does this mean envy no longer used, or is not updated for lucid?
Is my only option for OpenGl to use restricted drivers? I think the restricted drivers are causing me some grief with compiz & emerald. I frequently lose emerald, & have to reload the windows manager. I rarely saw these issues with karmic or jaunty.
I used sudo apt-get build-dep wine1.2 to get the dependencies for the lastest Wine, but when compiling it, I get:
configure: WARNING: No OpenGL library found on this system. OpenGL and Direct3D won't be supported.
I thought it gave me all the dependencies I needed.
I'm trying to compile wine from source, with a patch to make it work for Worms Armageddon. I've applied the patch and go to run
Code:
$ ./configure
It then pumps out rows of text and at the end reads:
Code:
configure: WARNING: No OpenGL library found on this system.
OpenGL and Direct3D won't be supported. I went ahead and finished compiling it but it doesn't run worms, so I've come back to this opengl issue.