I'm trying to span my desktop across my 2 displays. I tried to edit xorg.conf-vesa to no avail.
Here is xrandr:
bash-3.1$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1600
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0*+
1680x1050 59.9
[code]....
I have attached a portion of xorg.conf-vesa and xrandr --verbose.
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
I'm having trouble with Debian 8 and using my dual monitor setup. Whenever I install a desktop that uses lightdm as a display manager (XFCE, MATE, Cinnamon) the login screen is cloning the two monitors rather then extending the desktop. I don't have the issue with gnome 3 (gdm) or kde (kdm). I tried installing Slim as well, but that has the same cloning issue.
I had a similar issue with g the XFCE environment, but I was able to resolve it by installing arandr and configuring the monitor layout. Upgrading from Stable to Testing also fixed the XFCE issue with the newest version of XFCE. Unfortunately I still have the display manager issue (lightdm/slim) in Testing as well. I would prefer to use XFCE but I'm willing to move to Gnome 3/KDE if need be to resolve the issue with the login screen.
I upgraded my HP Elitebook 6930p from 9.04 to 9.10. When X starts the display shows random lines. I can boot into "recover" mode from GRUB and get the command prompt. 9.04 worked fine so I'm pretty sure it's not the video card. The video card is ATI Radeon HD 3400.
View 4 Replies View RelatedThe last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
I am using Dell studio 1537. I tried to install propitiatory driver for my ati radeon hd3400. After installation and reboot, I got no display and my system rebooted. Now I had just reinstalled fedora11. Any Way to install ATI driver safely?
View 1 Replies View RelatedI just finished building my new machine. I've got windows 7 running just fine on it, but I wanted to dual boot Ubuntu 10.04. I downloaded the 64 bit iso and tried installing it from both a live cd and a usb drive. When I boot from either (cd or usb), I see the Ubuntu loading/boot screen, but after the data is loaded, my display goes black and seems not to be able to find a signal. I assumed initially that it was probably due to the fact that I was connecting to my tv by HDMI cable. I guessed that Ubuntu did not have HDMI drivers for my video card, ATI Radeon HD 5750, by default. Then today, my new monitor arrived and I switched to the DVI output on my video card. I assumed that this would allow me to boot and install. I was wrong. I experienced the same symptoms on my monitor via DVI as I did on my TV via HDMI. why my monitor drops the signal as soon as it leaves the loading/boot screen?
View 9 Replies View RelatedInstalled Natty a few days ago and everything was working fine. I have a dual head setup with the left monitor rotated Clockwise 90 degrees (AKA rotate left). When I setup the the displays properly, instead of just cloning, I noticed a problem, making Unity unusable. When I apply the rotation either in the xorg.conf fle or using xrandr, the display shows a corrupt looking image. When I turn compiz off and use metacity instead it works perfectly fine.
Display Adapter:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Cedar PRO [Radeon HD 5450]
xorg.conf:
Code:
Section "ServerLayout"
Identifier "Desktop"
Screen "RightScreen"
Screen "LeftScreen" LeftOf "RightScreen"
[code]....
anyone know about a driver to the hp scanjet 4890. i am running ubuntu 10.4 lts. i have heard that there is no driver for linux for that scanner, but those posts were old.
View 1 Replies View RelatedI want to get Debian stable working on an iMac 11,2 (previous model):
1/ Same problem as this one, but I solved it by installing the fglrx-driver
2/ New problem: magic mouse and wireless keyboard don't work - solution: install .38-kernel from backports
3/ New problem: fglrx for .38 requires linux-headers.38 requires linux-kbuild.38...
So again stuck with the vesa-driver. I'm quite happy with the wireless mouse and keyboard working, so I'd rather stay with linux-image.38.
Two possibilities:
1/ I get the radeon-driver working
2/ I get the fglrx-driver working
I'd prefer the first method, but as you can see in the log (infra), there's a version mismatch between the kernel and the radeon-module. Any ideas how to get around this?
Using the radeon-driver gives me the following EE's in xorg.0.log.old:
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
(EE) RADEON(0): Acceleration initialization failed
(EE) RADEON(0): clock recovery failed
(EE) RADEON(0): channel eq failed
(EE) GLX error: Can not get required symbols.
The las error is also shown as the only error when I use the VESA-driver; so clearly that is not the problem. I have tried without an xorg.conf, and the following xorg.conf won't work either:
Section "Module"
Load "glx"
Load "dri"
EndSection .....
I also tried the radeonhd-driver, but that doesn't change anything.
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies View RelatedI've just installed the proprietary ATI drivers from the AMD website and that all went fine. After that I restarted my pc and executed the following in the terminal:
Code:
atiode -P60 -H localhost:0; echo $?
However, that returns 2 which means that a render error occurred. Also, OpenGL reports that shaders are not supported.
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies View RelatedI just put in an ATI Radeon x600 on my OpenSuse system I loaded last week. The Xorg log shows that it is using the Radeon module (driver). I am seeing colored/static rectangles covering the green wallpaper and when scrolling in Firefox. Does anyone know how to resolve this issue, and is this the driver I should be using?
View 3 Replies View Relatedjust wondering has anyone gone through ATI Radeon HD 4830 with Slackware 13 64bit, can it be recognized correctly by HAL with built-in open source radeon drivers or it should be installed with fglrx.
View 14 Replies View RelatedIm planning to get ati radeon hd 6970. Wonder if theres available xf86-video driver support for it rather than official ati catalyst driver? and what are your expirience with it?
View 3 Replies View RelatedI decided to put a Radeon 8500DV card in my Slackware box. Works fine with the Vesa driver. Problem is, I'm using a widescreen monitor, and Vesa doesn't support my default resolution (1366x768). So I thought I'd do a little editing in my xorg.conf file and fix it right up.
I logged on as root, and did "X -configure", then I went in and edited the file it made me and put in the appropriate values for my monitor and resolution. And then it copied it over my xorg.conf file, and typed startx. Voila! Looked great, and I checked the settings to be sure I was in 1366x768. It worked fine!
Once.
Then I logged out and tried "startx" with my user account. As soon as I do, my monitor displays "No Signal"... weird - cause it just worked. So I rebooted, and logged on as root, and tried startx again. "No Signal"
So why would it work just once and not again. I tried repeating my steps exactly, and still can't get it to come up.
Here is the xorg.conf I used when it did work:
Quote:
Originally Posted by xorg.conf
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
[Code].....
I tried removing the Card1 and Screen1 sections (since they are invalid), but that made no difference.
I am running Slackware-current 13.37.0 (kernal 2.6.37.6) on my desktop with ATI Radeon X300 video card. I have downloaded the latest driver and installed it successfully with the commands:
But the `aticonfig --initial' fails with the message:
I have already read the "Slackware: ATI SlackBuild (ENG)" from cchtml.com and some of the posts on this forum but couldn't fix the problem.
In 2.6.37rc and later, there began an issue with regard to resuming my bttv card after suspend. The problem is that the tuner device is no longer seen upon resume after suspend. Luckily, I have found that the issue appears only when both bttv & radeon are loaded prior to suspend. So I am able to resolve/avoid the issue if
1) bttv loaded & radeon unloaded
2) bttv unloaded & radeon loaded
While I may revisit bisecting, I would like to have a pretty good idea on what to focus on. I have already tried to slim down the kernel to the key drivers during bisect, but I want to look more how the interaction of the two drivers plays into it. What I need is some background on suspend, some hardware specs, or some type of suspend debugger/hints where to look. Since the tuner is a dead simple device, it is hard to see where it could go wrong. So perhaps it is the PCI bus. The radeon card is PCI-X, and the tuner card is PCI. But it could also be I2C or SMBUS? Also note that in the prior kernel, 2.6.36, it is perfectly fine.
I have noticed that recently, cannot tell after which update, my mplayer does not scale to full screen. It just shows the movie in the center of the screen with black frame around it.I do not know how tightly it may be related, but xine-check says my X server does not support YV12 overlays (twice, BTW, so there must be a bug in its message file) and has no XVideo support.Is it normal in current for now? The card is X1200 (R690)
View 4 Replies View RelatedI have a problem with the radeon driver and running 3d applications (namely glxgears and google-earth). Basically the 3d application is competing to stay on top of other windows. The problem is present with all windows and balloon pop ups such as those that pop up when I click on icons in google earth; The globe will just try to get on top again and I won't be able to see what I clicked on (like the panoramio pictures).
I have had this problem with kernels huge-smp of slackware13.1, custom on 2.6.33.4 kernel, and custom 26.35.4 and 2.6.35.7 kernels. My kernel config stuff (related to radeon) are:
[Code]....
My Nvidia card broke down recently, I replaced it with Ati Radeon 2600HD Pro.
Now I have no compositing, everything freezes or it's just dead slow.
As for now I'm using fglrx drivers, but I've tried xorg drivers before, without success either.
My xorg.conf
Code:
I am setting up a system that I was recently given and am having some problems with the ATI card configuration/driver (I think).
THE SYSTEM
System is P4 3.0Ghz, 1GB RAM, 200GB SATA with new full install of Slackware 13, Fluxbox WM/DE.
Code:
lspci lines:01:00.0 VGA compatible controller: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] (Secondary)
I have read a lot of things that seem confusing to me, but I have set it up mostly with info from slackwiki.org, and after reading various threads here at LQ.
I am using an xorg.conf created with Xorg -configure, with the radeon driver and have added the DRI section and enabled options per the above URL.
THE SYMPTOMS
First, X starts and I can run glxgears and get a frame rate of 3100+.
But glxinfo seems incorrect:
Code:
glxinfo |grep -i render
GL_RENDERER: Mesa DRI R300 20060815 x86/MMX/SSE2 TCL
I see no "direct rendering: yes" as seems to be required (am I missing something?).
Most things seem to work such as video playback from DVD and Flash.
At boot the vesa modes do not work and I have to use vga=normal, which is no big problem, although a better framebuffer mode would be nice if possible.
But the first big problem I hit is running Blender. When it starts my screen goes blank with just the mouse cursor visible and moving. To get out of this I can kill X or ctl-alt-Fx to get a new login and kill the blender process. Oddly, I found I can also alt-F2 (Open a Run dialog in Fluxbox) which opens with a running Blender behind it - but any attempt to interact with the blender window reverts to the blank screen with mouse cursor.
I believe this to be due to the lack of DRI mostly because of a similar problem once encountered on another system - but am open to other suggestions.
But I think I need to better understand and configure the drivers for this video card before troubleshooting any applications.
So, I guess my questions would be:
1. Is the radeon driver the best choice for this card?
2. Are there advantages/disadvantages to using the ATI driver instead? (Is there a slackbuild for the proprietary driver?)
3. Can someone point me to any better sources of info for ATI cards/drivers used under Slackware?
I try to connect my graphic card with my TV. I have ATI Radeon 4850 card with 7 pins S-video output and I want to connect it my TV using s-video to RCA cable (the RCA output is yelow, red and white, I assume the 7 pins has audio signal as well).
My card doesn't have problem when connect it wit my monitor via DVI, but the S-video out is not detected. How can I enable it? Can I configure the card from KDE? If so, how?
I'm using the driver from Slackware package and I'm using Slackware 13 stable 64.
I've got an older HP Pavilion dv8000 laptop with ATI Radeon XPRESS 200M 5955 video. This worked fine out-of-the-box with 13.1. With 13.37 I can't get KDE desktop effects to work, glxgears reports about 50 fps, and the system can suspend but not resume. I have no xorg.conf at all. Here is the glxinfo and current Xorg log. Just to note, this is with Slackware64 13.37 with the multilib stuff installed.
View 4 Replies View RelatedI've upgraded (reinstalled) from Slackware 13.1 to 13.37 on an old iMac and have problems with slow graphics.
lspci says this about the graphics card:
Code:
With Slackware 13.1 I had no KMS enabled and graphics speed was okay. It wasn't very good, but okay for everyday work. Now with 13.37 it's extremely slow. glxgears runs with only around 38 fps, no matter what I do. And every now and then when logging off, I get a black screen and no new kdm-login. But I can ssh into that machine and restart X by issuing 'init 3;init 4'.
KMS is enabled (I've also tried disabling it, but then KDE crashes right after logging in) and it's a fresh installation of 13.37 with a 2.6.37.6 kernel.
What can I do?
I have to admin I don't know this video and X stuff very well and I used to have machines with NVIDIA cards.
If there's anything else than the usual Xorg.0.log needed.
To me the log doesn't look like there's any problem whatsoever:
Code:
64 13.1 it's patched to the very latest.I need my terminals. I use them. They do work until X is started.How do I get them to not go away when X is started?radeon 5450I added an append in lilo.conf ofvideo=radeonfbAnd I load the radeon module before I startx/sbin/modprobe radeonBut all of the tty(2 through 6) still disappear as soon as X is started.By "disappear", I mean that there's no cursor or text on the screen -- appears as if is in sleep mode but neither the mouse nor the keyboard -- IOW tty login remains not available.
View 2 Replies View RelatedI have been using slackware for a few years now and just made a jump from 12.1 to 13.0 recently on my Dell Inspiron 6400 laptop. Everything seems to be working great except for the video players. When I try to start xine I get the following error:
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 135 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 1977
[Code].....
I am having problems getting xrandr to work on my Thinkpad Z60m.I've tried different xorg configurations, but xrandr does not activate
dual screen mode to where I would have one large desktop. My clean xorg.conf after running xorgsetup is the following:
[code]...
i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
[code]...
