Ubuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
I'm unable to install any package on my Ubuntu, apt-get terminates with following error message. I'm using Ubuntu Intrepid 8.10
Code:
baipaneni@Baipaneni:~$ sudo apt-get install python-tagpy
[sudo] password for baipaneni:
Reading package lists... Done
Building dependency tree
[Code]....
I just recently installed 10.10 and now I'm trying to install boxee from a .deb file the following is the result.
dave@dave-laptop:~/Desktop$ sudo dpkg --install boxee-0.9.22.13692.x86_64.deb
(Reading database ... 170826 files and directories currently installed.)
Preparing to replace boxee 0.9.22.13692 (using boxee-0.9.22.13692.x86_64.deb) ...
[code]....
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies View RelatedI had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I updated my Xubuntu 10.04 yesterday and some packages had errors on install. I think I have tracked it down to python2.6 install. I ran apt-get install mousepad just to see the errors and this is part of what it returned:
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
15 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up update-manager-core (1:0.134.10) ...
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeApport.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAptCdrom.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAufs.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeCache.py ...
file does not exist: /usr/lib/python2.6/dist-packages/computerjanitor/plugin_tests.py
pycentral: pycentral pkginstall: error byte-compiling files (49)
pycentral pkginstall: error byte-compiling files (49)
dpkg: error processing update-manager-core (--configure):
subprocess installed post-installation script returned error exit status 1 ...
Errors were encountered while processing:
update-manager-core
gdebi-core
gdebi
gdebi-kde
jockey-common
jockey-gtk
python-aptdaemon
aptdaemon
python-aptdaemon-gtk
software-center
update-manager
update-manager-kde
packagekit-backend-apt
packagekit
kpackagekit
E: Sub-process /usr/bin/dpkg returned an error code (1)
Then, I checked where it said the missing files were and found several broken symlinks like this:
lrwxrwxrwx 1 root root 33 2010-08-09 20:34 xapian.py -> ../../../share/pyshared/xapian.py
All of the broken symlinks need another ../ on the front. I was considering creating a script that will read the broken symlinks, add another ../ on the front of the target and then change the symlink target to that address.
When I try to update the computer, like with the automatic updates, every time after it's done I get an error message stating that a number of the updates were unable to actually update:
"Errors were encountered while processing:
What can I do to get those updates to actually update?
I just reformatted my PC and installed Natty 11.04; my work files are all backed up in a separate /home directory that resides on another partition separately. That partition is not formated nor erased. I tried installing git through apt-get:
[code]...
I even followed the troubleshooting procedures for PackageManager here but to the same man-db postprocessing error. Any other logs I should look at?
im trying to upgrade the kernal
Code:
Setting up linux-image-2.6.38-10-generic (2.6.38-10.46) ...
Running depmod.[code]......
Errors were encountered while processing:
linux-image-2.6.38-10-generic
linux-image-generic
linux-generic
Code:
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info# dpkg --configure -a
Setting up libdebconfclient0 (0.147) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebconfclient0 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomecanvasmm-2.6-1c2a (2.26.0-1build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomecanvasmm-2.6-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libdebian-installer4 (0.68ubuntu3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebian-installer4 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libglademm-2.4-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgconfmm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomemm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomemm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
libdebconfclient0
libgnomecanvasmm-2.6-1c2a
libdebian-installer4
libglademm-2.4-1c2a
libgconfmm-2.6-1c2
libgnomemm-2.6-1c2
So from a previous problem, I goto:
Code:
cd /var/lib/dpkg/info
but find anything todo with libgnome-vfsmm-2.6-1c2a
has 0 bytes, ok problem found (the electric went off durring an upgrade)
It won't reinstall, as it can't uninstall.
Ubuntu Lucid Beta2
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
Code:
root@enterprise:~# apt-get update && apt-get upgrade
Hit [URL] sarge Release.gpg
Ign [URL] sarge/contrib Translation-en
Hit [URL] sarge Release
Ign [URL] amd64 Packages
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing: linux-image-2.6.32-5-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also did an apt-get clean to drop the cache but that didn't help either.
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies View RelatedI have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies View Relatedso i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
Doing "ls -a" provides a listing of the hidden files.To process all the .bak files you can do *.bak for:
that.bak
this.bak
But how do you process all the hidden files like:
.that.bak
.this.bak
What is the equivalent of *.bak for only the hidden files?
I am looking for some suggestions if possible, regarding processing the files using perl script. Scenario is I have a location where new files will be added always. I need to process these files for some validation. I wrote a perl script to do this and I thought I can rename the files once they are processed in that way I dont process the same files again. But now I can't rename the files due to some restrictions. Second thought, to process them based on date stamp but as my perlscript is being automated and runs every one hour to process the files I can't go by date stamp.
View 5 Replies View RelatedI'm running apache2 and I installed php5 with yast. httpd2 -M states that php5 is loaded. /etc/apache2/conf.d/php5.conf is being included in httpd.conf and it contains:
Code:
<IfModule mod_php5.c>
AddHandler application/x-php .php
AddHandler application/x-httpd-php .php4
AddHandler application/x-httpd-php .php5
[Code]....
The first line was added by me since that's what mime.types actually contains.
php.ini is in /etc/php5/apache2 and since I was not sure apache/php was finding it I added a PHPIniDir "directive" into httpd.conf. I have not changed it.
Test file is the typical /srv/www/htdocs/info.php with <?php infophp(); ?>
Normal index.htm is working fine. php -a is working fine.
I spent a long afternoon around this configuration and I looked in plenty of pages for solutions. I only do occasional system administration so I might have easily overlooked something trivial, but I run out of ideas.
There is a thread in this web site with a similar problem but no solution:
Php5 not recognized in SUSE 10.2 Apache2
What could be missing/wrong if php5 is loaded and the addhandler is defined? How can I further test?
I seem to be getting some issues with the sound in .mkv files.I hear the sound, but certain sounds are missing. Example:Fight Club .mkv movie, I cannot hear the dialog but I can hear everything else perfectly.Doesn't work with the default movie player, or VLC.
View 7 Replies View RelatedMy Totem can play any mkv files just only with an internal sound card. When i connected an external speaker (Bose USB Audio), the sound of the playing mkv file suddenly muteThen i used Rhythmbox to check sound for the external speaker, it plays well.(Also for any other video formats e.g. AVI)My laptop has two sound cards as following
Code:
amadeus@amadeus-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies View RelatedI'm trying to automate the transfer and processing of files between two systems to help test and compare a new server installation. The workflow is a bit complex but I'm basically modifying a script on server 'A' to push a file to server 'B' as standard input to another script.
[Code]...
But no luck. I've tried it without the port in the server_args parameter, without the '-l' option; I've tried having the server parameter set to 'tcpd' and the call to '/bin/nc' in the server_args too. But no success. Can anyone point out what I'm doing wrong with the config? PS. I've restarted xinetd and server B is listening on port 1112 and accepting connections - but nothing gets piped into the script on server B.
I've just done a fresh install of ubuntu 10.10 and it works great, but I was feeling adventurous one day and mess up my sound experimenting with different drivers.What I am asking is what would be all the programs I could reinstall to get it back to the original install?I've all ready tried Code:sudo apt-get --purge --reinstall install libasound2What other programs could I try?
View 8 Replies View RelatedI've an inbuilt sound card on my mother board which is ASUS P5N73AM. I get proper sound in win XP, however in Ubuntu it's very very slow. I just installed VLC , the movies are playing fine, however the sound is very slow, hardly i can hear it at full volume.
View 8 Replies View RelatedI got a problem with gnome-subtitles when I try to sync an srt file with an mkv file: no sound available, whereas in the case of an avi file no problem of course. Did you experiment the same problem and find a workaround?
View 1 Replies View RelatedI've had no trouble with it until attempting to add new music to my banshee music library and ipod. I've copied the music into my music folder and tried to convert to MP3 with sound converter but it keeps popping up with the warning "Cannot overwrite source files". I tried to convert the files to MP3 directly from the cd but that didn't work either.
View 6 Replies View RelatedUp until now I've kept Windows XP on my system because of a couple of programs that I need for video editing and processing. Just this past week I got a new computer with an AMD 2.8 GHz quadcore processor and I'm just wondering if with this machine I might be able to run XP in Virtualbox and not set aside an XP partition. With 4 GB of RAM, I should be able to give the Virtualbox adequate memory. Oh, yeah, I have a new 500 GB SATA hard drive, too.
View 1 Replies View RelatedI have a problem regarding speech recording and i couldn't find a way around it. I want to record voice while at the same time processing it. Let me explain some more, what i want to do is to keep on speaking and it should be recorded in a file which i can process at the same time. If somebody knows of any such program or way to do this(like some code in C which can auto direct the recorder to keep on recording and saving).
View 1 Replies View RelatedI'm starting to use Ubuntu 10.04 LTS and want to install a Java based language, Processing which uses OpenCv library to perform video issues. [URL]. I'm not familiar with the terminal but willing to be. I'm also not familiar with the file system, I mean I don't exactly know where the archives downloaded are and where they should be to be executed.
View 6 Replies View Related