Debian :: Errors Encountered While Processing AMD64 Packages
Mar 21, 2011
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
Code:
root@enterprise:~# apt-get update && apt-get upgrade
Hit [URL] sarge Release.gpg
Ign [URL] sarge/contrib Translation-en
Hit [URL] sarge Release
Ign [URL] amd64 Packages
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing: linux-image-2.6.32-5-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also did an apt-get clean to drop the cache but that didn't help either.
View 9 Replies
ADVERTISEMENT
Apr 23, 2010
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies
View Related
Mar 3, 2011
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 12 Replies
View Related
Nov 7, 2010
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies
View Related
Mar 22, 2011
I had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
View 7 Replies
View Related
Apr 14, 2010
Code:
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info# dpkg --configure -a
Setting up libdebconfclient0 (0.147) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebconfclient0 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomecanvasmm-2.6-1c2a (2.26.0-1build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomecanvasmm-2.6-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libdebian-installer4 (0.68ubuntu3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebian-installer4 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libglademm-2.4-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgconfmm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomemm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomemm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
libdebconfclient0
libgnomecanvasmm-2.6-1c2a
libdebian-installer4
libglademm-2.4-1c2a
libgconfmm-2.6-1c2
libgnomemm-2.6-1c2
So from a previous problem, I goto:
Code:
cd /var/lib/dpkg/info
but find anything todo with libgnome-vfsmm-2.6-1c2a
has 0 bytes, ok problem found (the electric went off durring an upgrade)
It won't reinstall, as it can't uninstall.
Ubuntu Lucid Beta2
View 3 Replies
View Related
Jan 20, 2010
I'm unable to install any package on my Ubuntu, apt-get terminates with following error message. I'm using Ubuntu Intrepid 8.10
Code:
baipaneni@Baipaneni:~$ sudo apt-get install python-tagpy
[sudo] password for baipaneni:
Reading package lists... Done
Building dependency tree
[Code]....
View 3 Replies
View Related
Sep 9, 2010
I updated my Xubuntu 10.04 yesterday and some packages had errors on install. I think I have tracked it down to python2.6 install. I ran apt-get install mousepad just to see the errors and this is part of what it returned:
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
15 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up update-manager-core (1:0.134.10) ...
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeApport.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAptCdrom.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAufs.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeCache.py ...
file does not exist: /usr/lib/python2.6/dist-packages/computerjanitor/plugin_tests.py
pycentral: pycentral pkginstall: error byte-compiling files (49)
pycentral pkginstall: error byte-compiling files (49)
dpkg: error processing update-manager-core (--configure):
subprocess installed post-installation script returned error exit status 1 ...
Errors were encountered while processing:
update-manager-core
gdebi-core
gdebi
gdebi-kde
jockey-common
jockey-gtk
python-aptdaemon
aptdaemon
python-aptdaemon-gtk
software-center
update-manager
update-manager-kde
packagekit-backend-apt
packagekit
kpackagekit
E: Sub-process /usr/bin/dpkg returned an error code (1)
Then, I checked where it said the missing files were and found several broken symlinks like this:
lrwxrwxrwx 1 root root 33 2010-08-09 20:34 xapian.py -> ../../../share/pyshared/xapian.py
All of the broken symlinks need another ../ on the front. I was considering creating a script that will read the broken symlinks, add another ../ on the front of the target and then change the symlink target to that address.
View 5 Replies
View Related
Nov 2, 2010
When I try to update the computer, like with the automatic updates, every time after it's done I get an error message stating that a number of the updates were unable to actually update:
"Errors were encountered while processing:
What can I do to get those updates to actually update?
View 9 Replies
View Related
May 10, 2011
I just reformatted my PC and installed Natty 11.04; my work files are all backed up in a separate /home directory that resides on another partition separately. That partition is not formated nor erased. I tried installing git through apt-get:
[code]...
I even followed the troubleshooting procedures for PackageManager here but to the same man-db postprocessing error. Any other logs I should look at?
View 9 Replies
View Related
Jul 17, 2011
im trying to upgrade the kernal
Code:
Setting up linux-image-2.6.38-10-generic (2.6.38-10.46) ...
Running depmod.[code]......
Errors were encountered while processing:
linux-image-2.6.38-10-generic
linux-image-generic
linux-generic
View 2 Replies
View Related
Nov 5, 2010
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
View 1 Replies
View Related
Nov 17, 2010
I have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies
View Related
Apr 8, 2015
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
View 1 Replies
View Related
Jun 22, 2011
Installed 6.01a from DVD 1 on a system with 4GB ram. Installer installed amd64 version by default. When I try to install amd64.deb files I get "wrong architecture" error messages from the package manager.
root@Laptop-RalphDeb:/home/ralphq# uname -r
2.6.32-5-amd64
root@Laptop-RalphDeb:/home/ralphq# uname -p
unknown
Why I can install amd64 programs and why I get unknown for the uname -p command?
View 2 Replies
View Related
Nov 4, 2010
Everytime I try to install, or unistall anything, I get an error:
Errors were encountered while processing: man-db
There are a few different ones, but they all have that.
View 3 Replies
View Related
May 7, 2011
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details.
"sudo apt-get dist-upgrade".
I will always get an error pop-up and a error message in terminal saying
"errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" &
"E:sub-process /usr/bin/dpkg returned an error code (1)"
And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
View 2 Replies
View Related
Apr 14, 2011
My new laptop works out of the box except for the video and the ethernet. For this, I have to use a later kernel than the Debian kernel (debian squeeze is currently 2.6.32). Upgrading to the new kernel (without moving to the testing dist itself) was pretty easy. I just installed linux-image-2.6.38-2-amd64 and linux-base from the testing distribution by manually downloading and using dpkg. After that, ethernet and video started working.
However, my virtualbox installation no longer works because the drivers do not match the kernel. I am used to this; whenever debian upgrades the kernel on me, I have to run "/etc/init.d/vboxdrv setup". This rebuilds the drivers. This failed for me, however, because it could not find the headers. So, I installed some more packages:
linux-kbuild-2.6.38
linux-headers-2.6.38-2-common
linux-headers-2.6.38-2-amd64
Now, when I rebuild it, I get this:
# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules:.
Uninstalling old VirtualBox DKMS kernel modules:.
[code]....
View 14 Replies
View Related
Apr 3, 2011
the mcr85+1 packages were built using qt 4.6.3, so will be squeeze-compatible. umplayer is a fork of the abandoned smplayer project which adds skinning, shoutcast stream, and minitube-like videos search, playback, and download capability to the program.
[url]
i did a pull and build from the svn repo, since that is newer than the 0.92 debs on the website and solves some videos issues. debianized sources included so one can build the program on any architecture that supports qt 4 4.6 and mplayer...plus it's a good idea not to trust anybody's binaries off the web, so to be really safe, rebuild the program yourself if you don't know who the heck i am. update 20 april 2011: link to svn 143 builds and sources: [url] update: 25 june 2011: new pull from svn--fixes the returning control bar problem with skins and kde 4 kwin desktop effects enabled:
[url]
squeeze users should use the mcr85 packages, the mcr110 ones need qt 4.7. sources included as usual. it looks like it would be a nice addition to the debian repo...
View 14 Replies
View Related
Oct 30, 2010
I have a computer with internet access with amd64 architecture running Debian stable (Lenny). I have another computer with NO internet access with i386 architecture running Debian stable (Lenny).I want to download some packages for the i386 computer using the amd64 computer. So far, the only way I can see to do this is to use dpkg-architecture to temporarily change to i386 on the internet computer, run aptitude with the download-only option to retrieve the packages I need with all suitable dependencies, then switch the internet computer back over to amd64.
I can't imagine I'm the only person who ever needed to do this, and yet I've had no luck finding any advice. The method I described seems rather awkward - is there a more elegant solution?
I apologize to the membership, I realize now the absurdity of this subject. Having now studied the online repository search functions closer, I see it appears packages are automatically retrieved with all necessary dependencies. As such, it is not necessary to use apt and its various functions to do the job.
View 3 Replies
View Related
Feb 25, 2011
Trying to install Debian Sid in VMWareplayer....
Got image debian-testing-amd64-netinst.iso from : [url]
Following happens :
View 2 Replies
View Related
Oct 28, 2010
I encountered these errors after i run make:
View 2 Replies
View Related
Oct 11, 2010
I just recently installed 10.10 and now I'm trying to install boxee from a .deb file the following is the result.
dave@dave-laptop:~/Desktop$ sudo dpkg --install boxee-0.9.22.13692.x86_64.deb
(Reading database ... 170826 files and directories currently installed.)
Preparing to replace boxee 0.9.22.13692 (using boxee-0.9.22.13692.x86_64.deb) ...
[code]....
View 1 Replies
View Related
Apr 12, 2011
Ubuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
View 1 Replies
View Related
Nov 17, 2010
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
View 6 Replies
View Related
May 3, 2010
videos videos work great, but unfortunately, when i try to access videos on hulu.com, i receive this error message: "we're sorry but we're unable stream this video to your system. this may be due to an adobe software limitation on 64-bit linux systems."
this is strange because hulu videos were working after i installed lynx but mysteriously stopped working. i don't have the swfdec-mozilla package installed nor the mozilla-plugin-gnash nor the flashplugin-installer.
what do i need to do to start clean and install the necessary packages?
View 7 Replies
View Related
Mar 1, 2010
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies
View Related
Sep 7, 2010
I have a post in beginners section but maybe I can find some help here.. If you do not mind,please read the following post about my problem.viewtopic.php?f=30&t=55243&p=320093#p319848
View 1 Replies
View Related
Sep 6, 2010
Today when I did apt-get dist-upgrade I encountered the following error:
apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
[Code]...
View 14 Replies
View Related
Jan 15, 2010
I am new to Fedora (using Constantine). I want to like it and it works nicely with on my Thinpad but there is a problem that would make me swith back to Ubuntu/Mint if I don't find a solution to it: I get dependency errors all the time missing librpm.so.0()(64bit) and librpmio.so.0()(64bit)
First I had this problem installing KDEnline and I thought, this program might be to exotic but the same problem stopped the installation of OpenOffice which is very strange. Is installing programs always such difficult for all the different packages like for Open Office? Is Fedora maybe to difficult for me as a intermediate user?
View 6 Replies
View Related
