Ubuntu :: Broken Update And Errors Encountered While Processing
Sep 9, 2010
I updated my Xubuntu 10.04 yesterday and some packages had errors on install. I think I have tracked it down to python2.6 install. I ran apt-get install mousepad just to see the errors and this is part of what it returned:
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
15 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up update-manager-core (1:0.134.10) ...
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeApport.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAptCdrom.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAufs.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeCache.py ...
file does not exist: /usr/lib/python2.6/dist-packages/computerjanitor/plugin_tests.py
pycentral: pycentral pkginstall: error byte-compiling files (49)
pycentral pkginstall: error byte-compiling files (49)
dpkg: error processing update-manager-core (--configure):
subprocess installed post-installation script returned error exit status 1 ...
Errors were encountered while processing:
update-manager-core
gdebi-core
gdebi
gdebi-kde
jockey-common
jockey-gtk
python-aptdaemon
aptdaemon
python-aptdaemon-gtk
software-center
update-manager
update-manager-kde
packagekit-backend-apt
packagekit
kpackagekit
E: Sub-process /usr/bin/dpkg returned an error code (1)
Then, I checked where it said the missing files were and found several broken symlinks like this:
lrwxrwxrwx 1 root root 33 2010-08-09 20:34 xapian.py -> ../../../share/pyshared/xapian.py
All of the broken symlinks need another ../ on the front. I was considering creating a script that will read the broken symlinks, add another ../ on the front of the target and then change the symlink target to that address.
View 5 Replies
ADVERTISEMENT
Nov 2, 2010
When I try to update the computer, like with the automatic updates, every time after it's done I get an error message stating that a number of the updates were unable to actually update:
"Errors were encountered while processing:
What can I do to get those updates to actually update?
View 9 Replies
View Related
Apr 23, 2010
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies
View Related
Nov 7, 2010
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies
View Related
Mar 22, 2011
I had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
View 7 Replies
View Related
Mar 3, 2011
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 12 Replies
View Related
Jan 20, 2010
I'm unable to install any package on my Ubuntu, apt-get terminates with following error message. I'm using Ubuntu Intrepid 8.10
Code:
baipaneni@Baipaneni:~$ sudo apt-get install python-tagpy
[sudo] password for baipaneni:
Reading package lists... Done
Building dependency tree
[Code]....
View 3 Replies
View Related
May 10, 2011
I just reformatted my PC and installed Natty 11.04; my work files are all backed up in a separate /home directory that resides on another partition separately. That partition is not formated nor erased. I tried installing git through apt-get:
[code]...
I even followed the troubleshooting procedures for PackageManager here but to the same man-db postprocessing error. Any other logs I should look at?
View 9 Replies
View Related
Jul 17, 2011
im trying to upgrade the kernal
Code:
Setting up linux-image-2.6.38-10-generic (2.6.38-10.46) ...
Running depmod.[code]......
Errors were encountered while processing:
linux-image-2.6.38-10-generic
linux-image-generic
linux-generic
View 2 Replies
View Related
Apr 14, 2010
Code:
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info# dpkg --configure -a
Setting up libdebconfclient0 (0.147) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebconfclient0 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomecanvasmm-2.6-1c2a (2.26.0-1build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomecanvasmm-2.6-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libdebian-installer4 (0.68ubuntu3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebian-installer4 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libglademm-2.4-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgconfmm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomemm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomemm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
libdebconfclient0
libgnomecanvasmm-2.6-1c2a
libdebian-installer4
libglademm-2.4-1c2a
libgconfmm-2.6-1c2
libgnomemm-2.6-1c2
So from a previous problem, I goto:
Code:
cd /var/lib/dpkg/info
but find anything todo with libgnome-vfsmm-2.6-1c2a
has 0 bytes, ok problem found (the electric went off durring an upgrade)
It won't reinstall, as it can't uninstall.
Ubuntu Lucid Beta2
View 3 Replies
View Related
Nov 5, 2010
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
View 1 Replies
View Related
Mar 21, 2011
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
Code:
root@enterprise:~# apt-get update && apt-get upgrade
Hit [URL] sarge Release.gpg
Ign [URL] sarge/contrib Translation-en
Hit [URL] sarge Release
Ign [URL] amd64 Packages
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing: linux-image-2.6.32-5-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also did an apt-get clean to drop the cache but that didn't help either.
View 9 Replies
View Related
Nov 17, 2010
I have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies
View Related
Jun 5, 2010
I'm running UNR 10.04 on a Samsung NC10.Every thing has been working great for the last few weeks since I downloaded and installed - almost everything worked great out of the box! Only 'problem' I was having was pants flash performance but that's a bit of a given I guess.However, this afternoon I did an update + upgrade, then did the required restart.Booted fine to login screen, but it then took a looong time for any thing to happen - before any panels/UNR interface appear, I get 3 errors, one after another.They are:
1. Could not update ICEauthority file /home/matt/.ICEauthority
2. Problem with configuration server /usr/lib/libgconf-sanity-check-2 exited with status 256
3. Nautilus could not create the following required folders /home/matt/Desktop, /home/matt/.nautilus
(I think the third one asked me to create the folders myself and then give it correct permission but not certain)I tried loging into standard Gnome desktop, same errors, same problem. Same with the gnome safe thing.After a while however, I do get one panel, in the top left corner - rather than stretching full width, it's about 2 inches across. On it are some buttons (mail, sound, chat, power, time) but not some that should be (guake, wireless etc)I brought up the run dialogue (Alt + F2) and tried a variety of programs but nothing happened with any (tried firefox, chromium, xchat, terminal)
View 1 Replies
View Related
Nov 4, 2010
Everytime I try to install, or unistall anything, I get an error:
Errors were encountered while processing: man-db
There are a few different ones, but they all have that.
View 3 Replies
View Related
May 7, 2011
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details.
"sudo apt-get dist-upgrade".
I will always get an error pop-up and a error message in terminal saying
"errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" &
"E:sub-process /usr/bin/dpkg returned an error code (1)"
And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
View 2 Replies
View Related
Mar 12, 2011
I have a computer with 128 ko of RAM (a very old one). I installed yesterday ubuntu 8 because ubuntu 9 requires 512 ko of RAM and was very slow. Now, I have problems to update packages and to install every thing. I changed the sources.list because it seems that links are no more available according to the error messages. (I have put many adresses for ubuntu 9 because I think the kernel is the same not as the kernel for ubuntu 10). But new problems have occurred like "broken dependencies". Now I want to correct, and I don't know how? I'm still a beginner with this OS.
View 2 Replies
View Related
Oct 28, 2010
I encountered these errors after i run make:
View 2 Replies
View Related
Oct 11, 2010
I just recently installed 10.10 and now I'm trying to install boxee from a .deb file the following is the result.
dave@dave-laptop:~/Desktop$ sudo dpkg --install boxee-0.9.22.13692.x86_64.deb
(Reading database ... 170826 files and directories currently installed.)
Preparing to replace boxee 0.9.22.13692 (using boxee-0.9.22.13692.x86_64.deb) ...
[code]....
View 1 Replies
View Related
Apr 12, 2011
Ubuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
View 1 Replies
View Related
Nov 17, 2010
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
View 6 Replies
View Related
Aug 22, 2009
While doing 'yum update' an error message was issued during clean up phase:
Code:
Cleanup : elfutils-libelf-0.141-1.fc11.i586 110/180
ERROR: Module uprobes does not exist in /proc/modules
Cleanup : systemtap-0.9.9-2.fc11.i586 111/180
Does this represent some kind of problem or can I just ignore it?
View 3 Replies
View Related
Apr 29, 2011
Code:
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_natty-updates_universe_i18n_Translation-en
E: The package lists or status file could not be parsed or opened.
Get this kind of error while trying to update Natty.
View 5 Replies
View Related
Jun 10, 2011
I cannot get the update or software center to work now that I am running natty. When I try to update manager it says
"E:Encountered a section with no Package:
header, Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages,
E:The package lists or status file could not be parsed or opened"
I assume that the software center has something to do with this too...
View 3 Replies
View Related
Jul 30, 2010
The update manager told me there were several packages to update, and I as usually said 'OK'. Then, it told me that some packages could not be installed. I ran dpkg in a terminal window, and this is what it looks like:
> sudo dpkg --configure -a
Setting up openjdk-6-jre-headless (6b18-1.8-4ubuntu3) ...
update-alternatives: error: alternative link /usr/bin/java is already managed by java~.
dpkg: error processing openjdk-6-jre-headless (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of openjdk-6-jre:
openjdk-6-jre depends on openjdk-6-jre-headless (>= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre-headless is not configured yet.
dpkg: error processing openjdk-6-jre (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of icedtea-6-jre-cacao:
icedtea-6-jre-cacao depends on openjdk-6-jre-headless (= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre-headless is not configured yet.
dpkg: error processing icedtea-6-jre-cacao (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of icedtea6-plugin:
icedtea6-plugin depends on openjdk-6-jre (= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre is not configured yet.
dpkg: error processing icedtea6-plugin (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
openjdk-6-jre-headless
openjdk-6-jre
icedtea-6-jre-cacao
icedtea6-plugin
View 1 Replies
View Related
Aug 8, 2010
My Ubuntu Lucid update-manager recently suggested that I install a group of updates. The following appears in /var/log/messages
Code:
dkms_autoinstaller: tp-smapi (0.40): Installing module on kernel 2.6.32-24-generic-pae.
dkms_autoinstaller: Kernel headers for 2.6.32-24-generic-pae are not installed. Cannot install this module.
dkms_autoinstaller: Try installing linux-headers-2.6.32-24-generic-pae or equivalent.[code]....
View 6 Replies
View Related
May 2, 2010
I started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies
View Related
Nov 30, 2010
im on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
View 9 Replies
View Related
Mar 1, 2010
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies
View Related
Mar 9, 2010
Jaunty Jack - 9.04. Ran update manager last night and ubuntu-one client failed as part of the upgrade. At a loss as to figure out how to fix this. I have removed the ubuntuone-gnome-client and re-installed from the website but now luck.
View 9 Replies
View Related
