I've just done a fresh install of ubuntu 10.10 and it works great, but I was feeling adventurous one day and mess up my sound experimenting with different drivers.What I am asking is what would be all the programs I could reinstall to get it back to the original install?I've all ready tried Code:sudo apt-get --purge --reinstall install libasound2What other programs could I try?
View 8 RepliesThe topic that creeps people out. Maybe I'm screwed, but lets hope not. I'm gonna give you as much info as I know is needed. Acer TimeLineX 3820TG. ATI HD 5850 and Realtek Semiconductor Corp. soundcard. Using Ubuntu 10.04 64 bit. When I first installed Ubuntu, the soundcard did not work properly i.e. no sound from jack or the mic didnt work either, I went to this page: [URL].. updated the ALSA as stated in the topic. After this, everything looked good. Everything worked except the flash-sound.
I have:
* Removed flash, firefox and chrome.
* Manualy removed the flashplugin.so, boath in $HOME and in /etc/<something>
* I tried to use this guide: http://ubuntuforums.org/showthread.php?t=204022, but I think I ruined it moore. (Creates some symbolic links)
* Re-installed flash, firefox and chrome. I have tried FLASH-AID plugin in Firefox, I have tried donwloading flash from synaptic.
* Tried to figure somthing out on IRC, without success.
I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.
uname -a
Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
aplay -l
aplay: device_list:223: no soundcards found...[code].........
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
I seem to be getting some issues with the sound in .mkv files.I hear the sound, but certain sounds are missing. Example:Fight Club .mkv movie, I cannot hear the dialog but I can hear everything else perfectly.Doesn't work with the default movie player, or VLC.
View 7 Replies View RelatedMy Totem can play any mkv files just only with an internal sound card. When i connected an external speaker (Bose USB Audio), the sound of the playing mkv file suddenly muteThen i used Rhythmbox to check sound for the external speaker, it plays well.(Also for any other video formats e.g. AVI)My laptop has two sound cards as following
Code:
amadeus@amadeus-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
I've an inbuilt sound card on my mother board which is ASUS P5N73AM. I get proper sound in win XP, however in Ubuntu it's very very slow. I just installed VLC , the movies are playing fine, however the sound is very slow, hardly i can hear it at full volume.
View 8 Replies View RelatedI got a problem with gnome-subtitles when I try to sync an srt file with an mkv file: no sound available, whereas in the case of an avi file no problem of course. Did you experiment the same problem and find a workaround?
View 1 Replies View RelatedI've had no trouble with it until attempting to add new music to my banshee music library and ipod. I've copied the music into my music folder and tried to convert to MP3 with sound converter but it keeps popping up with the warning "Cannot overwrite source files". I tried to convert the files to MP3 directly from the cd but that didn't work either.
View 6 Replies View RelatedUbuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
Whenever I start rhythmbox, it starts scanning my external HDD for sound files. There are 450,000+ sound files at least, and it won't import my music collection while it's doing this. Is there a way to stop this? Disconnecting or hiding the drive isn't an option as my music collection is in a folder on that drive, and there isn't enough space on my local HDD to store it.
View 6 Replies View RelatedI just installed openSUSE 11.2. When I had installed it, I could play music from ..... and others, but no mp3-files. Because of that I followed the steps described in this thread: Multi-media and Restricted Format Installation Guide - openSUSE Forums When I finished that, I still couldn't play my mp3-files and couldn't even play music from ..... anymore.
View 9 Replies View RelatedI was having problems playing videos at all (here: Video files won't play and Dolphin keeps closing.openSUSE Forums) but now videos will play but without sound.I'm using vlc and smplayer, on a laptop running KDE 11.2, and VLC gives me this error:SMplayer acts like nothing is amiss.I've gone through the restricted media guide, and the first few steps of the audio troubleshooting guide that is linked in another thread and neither have helped.I tried installing alsa firmware which installed something but did nothing, then I tried a soundtest and all I could get back was this.:~> speaker-test -Dplug:front -c2 -l5 -twavIf 'speaker-test' is not a typo you can use command-not-found to lookup the package that contains it,like this:cnf speaker-test and I've just tried the yast step but can't work out how to delete and re-add my card.
View 3 Replies View RelatedThere is no sound when playing avi files in XBMC.The videos play fine & there is sounds in menu.When i switch to Root the movies have sound,so whats wrong here?
View 9 Replies View RelatedI've had a persistent problem with the sound under my Debian systems. It doesn't depend on specific hardware, as it has continued even as I changed soundcards, swapped out the motherboard and so on. The problem is that sound produced by flash starts to fail about a day after a flash sound is first used. I tried a variety of things, installing different stuff, pulse audio, etc. Nothing made it work.
That's the bad news. The good news is that I booted Ubuntu off the live cd. I had to install flash, and then I was off and running, and it's been working for several days now. It appears that this Ubuntu doesn't suffer from the problem. Now one solution is that I can ditch Debian, wipe out my existing install and install Ubuntu. (I'm a bit hazy on what distinguishes Ubuntu from Debian if I replace the window manager.) I could also try reinstalling Debian and see if at that point things start to work.
But in recent conversations here, some people have suggested that reinstalling the OS is not the linux way. So I wonder, can I look at the sound installation in the working Ubuntu live cd that I'm running now and figure out what to change so that my nonworking system starts working? I took a look at the alsa.conf, but that didn't differ significantly.
When I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies View RelatedI have distorted sound when viewing SWF files on browsers. Tried both chrome and iceweasel. I have a Dell XPS with debian testing (64 bit), alsa is 1.0.23. Sound is working properly when playing formats other than swf.
View 1 Replies View RelatedI am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
I have a: debian squeeze(with last updates),sound system(Bose companion 5 USB) and Alsa Version 1.0.21. Sound system is work(good work) in:Ubuntu 9.10,Suse 11 and Windows But in Debian i have a starange problem:periodic sound is disappear(simply so or when i'm switch differents video files). It's not a problem with video players. /etc/init.d/alsa-utils restart(stop|start) not help. Remain only restart all system, but it's not always help.Sometime it's help only 3 or 5 restart time. Mother board audio card is disabled(in BIOS). Detailed about strangeness:
1 Variant: sound is disappear when i'm swich differents video files(simply video or online video).
2 Varian:When Debian is starting:sound eat in logins form(sound a drop),but at once sound is disappear.
[Code]....
yesterday I uninstalled evolution - thats where the horror started. Today I had my whole gnome panel on top missing, which makes it practically impossible to work on netbook remix. Then I tried to follow instructions in this post.[URL] hile trying to run that stuff in the terminal that I went into with strg-alt-f1, I think I either created a new user (with the same name???) or something else happened, ANYWAY NOW AFTER RESTARTING ALL FILES IN MY HOME FOLDER ARE GONE, SO ARE ALL MY SETTINGS. the programs are oddly still there, even the additional ones that I installed. but for the rest all settings, passwords and files are like after a fresh ubuntu installation to clean hard disk. btw i run lucid lynx on an eeepc 1008ha.
View 9 Replies View RelatedI ran this line: aptitude purge x11-common and all common files, all the tools I need are gone from my desktop. I have an amd64 with ubuntu +gnome on it.
Is there a way to reverse this --other than installing 1gb of packages one by one?
I set up Kubuntu today because the keyboard input was messed up in GNOME, due to some file being corrupted. Does anybody know how to replace GNOME files in Kubuntu? I'm new to it, trying to find my way around.
View 3 Replies View RelatedWhile learning about Ubuntu, I made an error in a chroot code...
This doesn't work either code...
Does someone know how to solve this?
I built out a headless VMWare v2.0.2 Server. I managed to work all that out but now I'm having some trouble getting my virtual machines on the server. I installed both proftpd and vsftpd but neither server lets me log in. 'Login Failed' is always returned (using the only account on the machine - created during the install).
So I decided to install samba, but samba chokes on large files. I tried over and over again to copy a 10GB VMDK file over samba and it gets to 5% or so and suddenly tells me there is a network problem and dies (which there is no network problem as these machines are all on the same subnet plugged into the same gigabit switch).
So now I'm back to FTP. Unfortunately when I ran apt-get remove proftpd, it didn't remove any of the config files (/etc/proftpd/*) so I manually deleted them. Now when I try to reinstall the FTP servers they won't start because the config files are gone. What's the apt-get syntax to completely uninstall these servers as if they had never been installed so I can start clean? I really don't want to have to do a complete system re-install just to fix 300KB FTP servers.
How do I reinstall Ubuntu without wiping my personal data files?
View 9 Replies View RelatedI am running a recently installed minimal install. I am having some fun building the system up but trying to keep things slim. I have installed the ATI catalyst drivers working from the tutorial here under 'Installing the Restricted Drivers Manually': [URL]... After successfully getting the ATI driver running, I realise I really don't need or want it and am wanting to uninstall it completely and return the config to the way it was. Some of that I can do with the aid of some of the links I have found but installing the ATI drivers no doubt killed some of the packages that were there in the first place (graphics was fine in the first place incidentally). Question: What might these squashed packages be so I can reinstall them and have graphics setup as it was before I installed the ATI drivers and how can I remove all trace of the ATI drivers?
View 8 Replies View Relatedthere is any way (via terminal or gediting a file) to use .flac files instead of .ogg in a sound theme file? I am creating a sound theme (several truthfully) and I would like to use the FLAC format if possible.
View 5 Replies View RelatedI've deleted /etc/apache2 and did run:
Code:
sudo apt-get -o DPkg::Options::="--force-confmiss" --reinstall install apache2.2-common
to get the default config back.
But starting the server via:
Code:
sudo /etc/init.d/apache2
results in:
Code:
Syntax error on line 161 of /etc/apache2/apache2.conf:
Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration
line 160-163 look like this:
Code:
<Files ~ "^.ht">
Order Allow,Deny # line in question
Deny from all
</Files>
The funny thing is that the exact same definition is in a debian lenny server config on another server. So why did this install a not working config?
I just removed apache2 via:
Code:
sudo aptitude remove apache2
sudo rm -r /etc/apache2
and reinstalled it via:
Code:
sudo aptitude install apache2
which also did not fix the config bug?
For testing I installed apache2 on another ubuntu 9.10 and did just copy the folder /etc/apache2 to my local installation - this fixed the problem. Still, why cant I reinstall apache2 with a working config?
First off. I'm not using Ubuntu Server. But I'm trying to get XAMPP set up so I can test Wordpress themes I make. Using 9.10. I got XAMPP installed using the Instructions from Apache Friends. When I went to Localhost I got the language page. Selected English but nothing happened.
Here's my Index.php:
Code:
<?php
if (!empty($_SERVER['HTTPS']) && ('on' == $_SERVER['HTTPS'])) {
$uri = 'https://';
} else {
$uri = 'http://';
}
$uri .= $_SERVER['HTTP_HOST'];
header('Location: '.$uri.'/xampp/');
exit;
?>
Something is wrong with the XAMPP installation :-( I searched and found a couple Index.php files. Deleted one. And now when I go to localhost I get a "Index of" page.I removed the XAMPP folder, Deleted Apache, PHP from Synaptic(They got reinstalled when i reinstalled XAMPP btw). Installed LAMP but it still does it. Maybe reinstall XAPP and copy the index.php files from another Comp?.
I accidentally removed my network manager (gnome) from my system (via synaptic) and hence have not been able to have access to the internet to reinstall the packages. I have experimented with many commands (with help from others) in terminal with little success.
What I now did was downloaded a 'NetworkManager-0.8.0.999.tar.gz' file and a 'NetworkManager-0.8.1.tar.bz2' file (from a different comp) and have placed them onto my desktop. I have read the INSTALL instructions within and it is a tad complex for me as I am new to Linux. I understand I have to extract the files and compile them into a new folder (I think I would choose a file in the /home directory)- how would I go about doing this? Following this, I need to './configure' or 'make' or 'make install' the files