My Totem can play any mkv files just only with an internal sound card. When i connected an external speaker (Bose USB Audio), the sound of the playing mkv file suddenly muteThen i used Rhythmbox to check sound for the external speaker, it plays well.(Also for any other video formats e.g. AVI)My laptop has two sound cards as following
Code:
amadeus@amadeus-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
I seem to be getting some issues with the sound in .mkv files.I hear the sound, but certain sounds are missing. Example:Fight Club .mkv movie, I cannot hear the dialog but I can hear everything else perfectly.Doesn't work with the default movie player, or VLC.
View 7 Replies View RelatedI've just done a fresh install of ubuntu 10.10 and it works great, but I was feeling adventurous one day and mess up my sound experimenting with different drivers.What I am asking is what would be all the programs I could reinstall to get it back to the original install?I've all ready tried Code:sudo apt-get --purge --reinstall install libasound2What other programs could I try?
View 8 Replies View RelatedI've an inbuilt sound card on my mother board which is ASUS P5N73AM. I get proper sound in win XP, however in Ubuntu it's very very slow. I just installed VLC , the movies are playing fine, however the sound is very slow, hardly i can hear it at full volume.
View 8 Replies View RelatedI got a problem with gnome-subtitles when I try to sync an srt file with an mkv file: no sound available, whereas in the case of an avi file no problem of course. Did you experiment the same problem and find a workaround?
View 1 Replies View RelatedI've had no trouble with it until attempting to add new music to my banshee music library and ipod. I've copied the music into my music folder and tried to convert to MP3 with sound converter but it keeps popping up with the warning "Cannot overwrite source files". I tried to convert the files to MP3 directly from the cd but that didn't work either.
View 6 Replies View RelatedUbuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
Whenever I start rhythmbox, it starts scanning my external HDD for sound files. There are 450,000+ sound files at least, and it won't import my music collection while it's doing this. Is there a way to stop this? Disconnecting or hiding the drive isn't an option as my music collection is in a folder on that drive, and there isn't enough space on my local HDD to store it.
View 6 Replies View RelatedI just installed openSUSE 11.2. When I had installed it, I could play music from ..... and others, but no mp3-files. Because of that I followed the steps described in this thread: Multi-media and Restricted Format Installation Guide - openSUSE Forums When I finished that, I still couldn't play my mp3-files and couldn't even play music from ..... anymore.
View 9 Replies View RelatedI was having problems playing videos at all (here: Video files won't play and Dolphin keeps closing.openSUSE Forums) but now videos will play but without sound.I'm using vlc and smplayer, on a laptop running KDE 11.2, and VLC gives me this error:SMplayer acts like nothing is amiss.I've gone through the restricted media guide, and the first few steps of the audio troubleshooting guide that is linked in another thread and neither have helped.I tried installing alsa firmware which installed something but did nothing, then I tried a soundtest and all I could get back was this.:~> speaker-test -Dplug:front -c2 -l5 -twavIf 'speaker-test' is not a typo you can use command-not-found to lookup the package that contains it,like this:cnf speaker-test and I've just tried the yast step but can't work out how to delete and re-add my card.
View 3 Replies View RelatedThere is no sound when playing avi files in XBMC.The videos play fine & there is sounds in menu.When i switch to Root the movies have sound,so whats wrong here?
View 9 Replies View RelatedWhen I try watching HD or avi files with totem the sound and video skips then equalizes on its own, when I try in vlc same thing but I play with the sound until video and sound sync but there is slowness in video.mplayer won't start. I installed the gmplayer front end and I just get that but no video or sound, video won't play.
View 4 Replies View RelatedI have distorted sound when viewing SWF files on browsers. Tried both chrome and iceweasel. I have a Dell XPS with debian testing (64 bit), alsa is 1.0.23. Sound is working properly when playing formats other than swf.
View 1 Replies View RelatedI am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
I have a: debian squeeze(with last updates),sound system(Bose companion 5 USB) and Alsa Version 1.0.21. Sound system is work(good work) in:Ubuntu 9.10,Suse 11 and Windows But in Debian i have a starange problem:periodic sound is disappear(simply so or when i'm switch differents video files). It's not a problem with video players. /etc/init.d/alsa-utils restart(stop|start) not help. Remain only restart all system, but it's not always help.Sometime it's help only 3 or 5 restart time. Mother board audio card is disabled(in BIOS). Detailed about strangeness:
1 Variant: sound is disappear when i'm swich differents video files(simply video or online video).
2 Varian:When Debian is starting:sound eat in logins form(sound a drop),but at once sound is disappear.
[Code]....
there is any way (via terminal or gediting a file) to use .flac files instead of .ogg in a sound theme file? I am creating a sound theme (several truthfully) and I would like to use the FLAC format if possible.
View 5 Replies View RelatedInstalled Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages: