Ubuntu Installation :: Webadmin Dkpg: Error "no Such File Or Directory Errors Were Encountered While Processing Webadmin_1.520_all.deb"
Nov 17, 2010
I have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies
ADVERTISEMENT
May 10, 2011
I just reformatted my PC and installed Natty 11.04; my work files are all backed up in a separate /home directory that resides on another partition separately. That partition is not formated nor erased. I tried installing git through apt-get:
[code]...
I even followed the troubleshooting procedures for PackageManager here but to the same man-db postprocessing error. Any other logs I should look at?
View 9 Replies
View Related
Nov 5, 2010
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
View 1 Replies
View Related
Nov 7, 2010
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies
View Related
Mar 22, 2011
I had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
View 7 Replies
View Related
Mar 3, 2011
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 12 Replies
View Related
Jan 20, 2010
I'm unable to install any package on my Ubuntu, apt-get terminates with following error message. I'm using Ubuntu Intrepid 8.10
Code:
baipaneni@Baipaneni:~$ sudo apt-get install python-tagpy
[sudo] password for baipaneni:
Reading package lists... Done
Building dependency tree
[Code]....
View 3 Replies
View Related
Sep 9, 2010
I updated my Xubuntu 10.04 yesterday and some packages had errors on install. I think I have tracked it down to python2.6 install. I ran apt-get install mousepad just to see the errors and this is part of what it returned:
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
15 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up update-manager-core (1:0.134.10) ...
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeApport.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAptCdrom.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAufs.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeCache.py ...
file does not exist: /usr/lib/python2.6/dist-packages/computerjanitor/plugin_tests.py
pycentral: pycentral pkginstall: error byte-compiling files (49)
pycentral pkginstall: error byte-compiling files (49)
dpkg: error processing update-manager-core (--configure):
subprocess installed post-installation script returned error exit status 1 ...
Errors were encountered while processing:
update-manager-core
gdebi-core
gdebi
gdebi-kde
jockey-common
jockey-gtk
python-aptdaemon
aptdaemon
python-aptdaemon-gtk
software-center
update-manager
update-manager-kde
packagekit-backend-apt
packagekit
kpackagekit
E: Sub-process /usr/bin/dpkg returned an error code (1)
Then, I checked where it said the missing files were and found several broken symlinks like this:
lrwxrwxrwx 1 root root 33 2010-08-09 20:34 xapian.py -> ../../../share/pyshared/xapian.py
All of the broken symlinks need another ../ on the front. I was considering creating a script that will read the broken symlinks, add another ../ on the front of the target and then change the symlink target to that address.
View 5 Replies
View Related
Nov 2, 2010
When I try to update the computer, like with the automatic updates, every time after it's done I get an error message stating that a number of the updates were unable to actually update:
"Errors were encountered while processing:
What can I do to get those updates to actually update?
View 9 Replies
View Related
Jul 17, 2011
im trying to upgrade the kernal
Code:
Setting up linux-image-2.6.38-10-generic (2.6.38-10.46) ...
Running depmod.[code]......
Errors were encountered while processing:
linux-image-2.6.38-10-generic
linux-image-generic
linux-generic
View 2 Replies
View Related
Apr 14, 2010
Code:
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info# dpkg --configure -a
Setting up libdebconfclient0 (0.147) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebconfclient0 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomecanvasmm-2.6-1c2a (2.26.0-1build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomecanvasmm-2.6-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libdebian-installer4 (0.68ubuntu3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebian-installer4 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libglademm-2.4-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgconfmm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomemm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomemm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
libdebconfclient0
libgnomecanvasmm-2.6-1c2a
libdebian-installer4
libglademm-2.4-1c2a
libgconfmm-2.6-1c2
libgnomemm-2.6-1c2
So from a previous problem, I goto:
Code:
cd /var/lib/dpkg/info
but find anything todo with libgnome-vfsmm-2.6-1c2a
has 0 bytes, ok problem found (the electric went off durring an upgrade)
It won't reinstall, as it can't uninstall.
Ubuntu Lucid Beta2
View 3 Replies
View Related
Mar 21, 2011
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
Code:
root@enterprise:~# apt-get update && apt-get upgrade
Hit [URL] sarge Release.gpg
Ign [URL] sarge/contrib Translation-en
Hit [URL] sarge Release
Ign [URL] amd64 Packages
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing: linux-image-2.6.32-5-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also did an apt-get clean to drop the cache but that didn't help either.
View 9 Replies
View Related
Nov 4, 2010
Everytime I try to install, or unistall anything, I get an error:
Errors were encountered while processing: man-db
There are a few different ones, but they all have that.
View 3 Replies
View Related
May 7, 2011
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details.
"sudo apt-get dist-upgrade".
I will always get an error pop-up and a error message in terminal saying
"errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" &
"E:sub-process /usr/bin/dpkg returned an error code (1)"
And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
View 2 Replies
View Related
Apr 23, 2010
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies
View Related
Mar 19, 2009
I'm trying to install Adobe Reader 8 and the command #dpkg -1 AdobeReader_enu-8.1.3-1.i386.deb comes up with the message error processing AdobeReader Cannot access archive. No such file or directory. Error was encountered while processing.
View 9 Replies
View Related
Nov 17, 2010
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
View 6 Replies
View Related
Aug 21, 2009
I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
View 1 Replies
View Related
Apr 28, 2010
I'm installing a NVIDIA driver and encountered some error message. Please see below the sequence (I've set runlevel to init 3);
linux:~/SuSe # rpm -ivh NVIDIA_GLX-1.0-4191.suse81:i586.rpm Preparing... ############################ [100%])file /usr/X11R6/lib/modules/drivers/nvidia-drv.o from install of NVIDIA_GLX-1.0-4191 conflicts with file from package XFree86-server-4.3.0.1-21
View 3 Replies
View Related
Aug 8, 2010
When I first got Ubuntu a few weeks ago, and got the older version of Wine from the Software Center, and it could run pretty much any game I wanted. Albeit really slowly. Well, I upgraded to 1.2 using the instructions on the wine website, and now a couple of my low-power games (like Bootfighter Windom XP) run totally perfectly, but a lot of mainstream games like Mirror's Edge and Mass Effect 2 just crash when I attempt to open them, and all they all have the same message where the main .exe file has "encountered a serious error." Here's what the terminal gives me:
Code:
Backtrace:
=>0 0x68286bbe in libc.so.6 (+0x110bbe) (0x033bd9c0)
1 0x693815a1 in winhttp (+0x115a0) (0x033bea20)
2 0x69381aa1 WinHttpQueryDataAvailable+0x60() in winhttp (0x033bea70)
0x68286bbe: fmull 0x488bdc4a(%ecx) .....
View 7 Replies
View Related
Oct 28, 2010
I encountered these errors after i run make:
View 2 Replies
View Related
Apr 23, 2010
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
These errors with USB stick:
View 9 Replies
View Related
Aug 4, 2010
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
View 5 Replies
View Related
May 27, 2011
I'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows:
ACER TRAVELMATE 290
256 RAM (240 usable)
Intel Pentium M processor 1500 MHz 599 MHz
Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller
Sound card: Realtek AC97 Audio
View 2 Replies
View Related
Oct 11, 2010
I just recently installed 10.10 and now I'm trying to install boxee from a .deb file the following is the result.
dave@dave-laptop:~/Desktop$ sudo dpkg --install boxee-0.9.22.13692.x86_64.deb
(Reading database ... 170826 files and directories currently installed.)
Preparing to replace boxee 0.9.22.13692 (using boxee-0.9.22.13692.x86_64.deb) ...
[code]....
View 1 Replies
View Related
May 1, 2010
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
View 9 Replies
View Related
Jul 26, 2010
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
View 2 Replies
View Related
Jun 2, 2011
I have an Asus eee 1000. Was running Ubuntu 10.04 netbook remix quite happily for some months until recently when I had some problems and decided to reinstall. Unfortunately that is when my real problems began. I have tried using various CD.s with Ubuntu 10.04 desktop and Ubuntu 10.04 Netbook remix.
Both give the same error - The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I tried using an SD card to install - that also gave errors. I tried installing Windows as much as I hate it and, annoyingly, that installed without any problems whatsoever. Then I tried using the Alternate Install disc. That gave me a different error - did everything and apparently installed a "basic" system but failed to install software. Struggled to find an answer to that. How I can get Ubuntu 10.04 back on my netbook. As it stands at the moment I am rapidly coming to the conclusion that I will have to install Windows or buy a new netbook - this seems preposterous!
I have seen that many people have this error and so it seems like some sort of bug. The only clue I had is that I did succeed in installing Ubuntu on my second 32 GB SD (the netbook has two (an 8 GB and a 32 GB). Unfortunately this SD appears much slower than the first so I erased it and went back to trying to get it on the 8 GB as before. Now it won't install on either - gives the same error. I do not believe that both my SD.s can be faulty and so I can only assume that somehow they both need erasing or formatting or something before I can reinstall.
View 1 Replies
View Related
Aug 12, 2011
I installed g++ using package manager and support libraries using sudo apt-get install build-essential cmd, but I'm not able to compile a socket code. It gives me the following error:
server.cpp:1:26: error: ServerSocket.h: No such file or directory
server.cpp:2:29: error: SocketException.h: No such file or directory
View 1 Replies
View Related
Apr 12, 2011
Ubuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
View 1 Replies
View Related