I'm unable to install any package on my Ubuntu, apt-get terminates with following error message. I'm using Ubuntu Intrepid 8.10
Code:
baipaneni@Baipaneni:~$ sudo apt-get install python-tagpy
[sudo] password for baipaneni:
Reading package lists... Done
Building dependency tree
[Code]....
I recently rebuilt my system and did a fresh install of Ubuntu 10.04. Now, everything I try to install returns the following errors. I have tried installing the troubled packages but I get the same errors. Any thoughts?
View 2 Replies View RelatedI had some problem while apt-get upgrade
Here is the output :
Code:
The following packages will be upgraded:
It says , error were encounteredn while processing the faenza-icon-theme.
while start following some tutorials, i face lot of problems only with nvidia-driver.for example, if i try to apt-get install chkconfig, the result will be as below:
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I updated my Xubuntu 10.04 yesterday and some packages had errors on install. I think I have tracked it down to python2.6 install. I ran apt-get install mousepad just to see the errors and this is part of what it returned:
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
15 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up update-manager-core (1:0.134.10) ...
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeApport.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAptCdrom.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeAufs.py
file does not exist: /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeCache.py ...
file does not exist: /usr/lib/python2.6/dist-packages/computerjanitor/plugin_tests.py
pycentral: pycentral pkginstall: error byte-compiling files (49)
pycentral pkginstall: error byte-compiling files (49)
dpkg: error processing update-manager-core (--configure):
subprocess installed post-installation script returned error exit status 1 ...
Errors were encountered while processing:
update-manager-core
gdebi-core
gdebi
gdebi-kde
jockey-common
jockey-gtk
python-aptdaemon
aptdaemon
python-aptdaemon-gtk
software-center
update-manager
update-manager-kde
packagekit-backend-apt
packagekit
kpackagekit
E: Sub-process /usr/bin/dpkg returned an error code (1)
Then, I checked where it said the missing files were and found several broken symlinks like this:
lrwxrwxrwx 1 root root 33 2010-08-09 20:34 xapian.py -> ../../../share/pyshared/xapian.py
All of the broken symlinks need another ../ on the front. I was considering creating a script that will read the broken symlinks, add another ../ on the front of the target and then change the symlink target to that address.
When I try to update the computer, like with the automatic updates, every time after it's done I get an error message stating that a number of the updates were unable to actually update:
"Errors were encountered while processing:
What can I do to get those updates to actually update?
I just reformatted my PC and installed Natty 11.04; my work files are all backed up in a separate /home directory that resides on another partition separately. That partition is not formated nor erased. I tried installing git through apt-get:
[code]...
I even followed the troubleshooting procedures for PackageManager here but to the same man-db postprocessing error. Any other logs I should look at?
im trying to upgrade the kernal
Code:
Setting up linux-image-2.6.38-10-generic (2.6.38-10.46) ...
Running depmod.[code]......
Errors were encountered while processing:
linux-image-2.6.38-10-generic
linux-image-generic
linux-generic
Code:
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info#
root@tux:/var/lib/dpkg/info# dpkg --configure -a
dpkg: status database area is locked by another process
root@tux:/var/lib/dpkg/info# dpkg --configure -a
Setting up libdebconfclient0 (0.147) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebconfclient0 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomecanvasmm-2.6-1c2a (2.26.0-1build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomecanvasmm-2.6-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libdebian-installer4 (0.68ubuntu3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libdebian-installer4 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libglademm-2.4-1c2a (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgconfmm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libgnomemm-2.6-1c2 (2.28.0-1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing libgnomemm-2.6-1c2 (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
libdebconfclient0
libgnomecanvasmm-2.6-1c2a
libdebian-installer4
libglademm-2.4-1c2a
libgconfmm-2.6-1c2
libgnomemm-2.6-1c2
So from a previous problem, I goto:
Code:
cd /var/lib/dpkg/info
but find anything todo with libgnome-vfsmm-2.6-1c2a
has 0 bytes, ok problem found (the electric went off durring an upgrade)
It won't reinstall, as it can't uninstall.
Ubuntu Lucid Beta2
I installed Virtualbox back in 10.04 and now have upgraded to 10.10. I used vbox repo for that:
[Code]....
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
Code:
root@enterprise:~# apt-get update && apt-get upgrade
Hit [URL] sarge Release.gpg
Ign [URL] sarge/contrib Translation-en
Hit [URL] sarge Release
Ign [URL] amd64 Packages
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing: linux-image-2.6.32-5-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
I also did an apt-get clean to drop the cache but that didn't help either.
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies View RelatedI have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies View RelatedUbuntu 10.04 with an HP d530 SFFFrom lspci:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)When trying to do sudo apt-get install -f, I get this:
Errors were encountered while processing:
libdirac-encoder0
libfaac0
[code].....
Everytime I try to install, or unistall anything, I get an error:
Errors were encountered while processing: man-db
There are a few different ones, but they all have that.
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details.
"sudo apt-get dist-upgrade".
I will always get an error pop-up and a error message in terminal saying
"errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" &
"E:sub-process /usr/bin/dpkg returned an error code (1)"
And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
I encountered these errors after i run make:
View 2 Replies View RelatedI just recently installed 10.10 and now I'm trying to install boxee from a .deb file the following is the result.
dave@dave-laptop:~/Desktop$ sudo dpkg --install boxee-0.9.22.13692.x86_64.deb
(Reading database ... 170826 files and directories currently installed.)
Preparing to replace boxee 0.9.22.13692 (using boxee-0.9.22.13692.x86_64.deb) ...
[code]....
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
I have an Asus eee 1000. Was running Ubuntu 10.04 netbook remix quite happily for some months until recently when I had some problems and decided to reinstall. Unfortunately that is when my real problems began. I have tried using various CD.s with Ubuntu 10.04 desktop and Ubuntu 10.04 Netbook remix.
Both give the same error - The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I tried using an SD card to install - that also gave errors. I tried installing Windows as much as I hate it and, annoyingly, that installed without any problems whatsoever. Then I tried using the Alternate Install disc. That gave me a different error - did everything and apparently installed a "basic" system but failed to install software. Struggled to find an answer to that. How I can get Ubuntu 10.04 back on my netbook. As it stands at the moment I am rapidly coming to the conclusion that I will have to install Windows or buy a new netbook - this seems preposterous!
I have seen that many people have this error and so it seems like some sort of bug. The only clue I had is that I did succeed in installing Ubuntu on my second 32 GB SD (the netbook has two (an 8 GB and a 32 GB). Unfortunately this SD appears much slower than the first so I erased it and went back to trying to get it on the 8 GB as before. Now it won't install on either - gives the same error. I do not believe that both my SD.s can be faulty and so I can only assume that somehow they both need erasing or formatting or something before I can reinstall.
I have about 170 Gigabyte free at the last of my hard. I have windows 7 and suse linux installed on the machine. When I try to install ubunto. I start to create the partitions manually because I want to add it as a third operating system on my PC. Anyway I create the 4 partitions /boot - / - /var - /home. Automatically it choose to install the boot on sda not sda 9 as the /boot was sda9. I click install.
It gives me this message "The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment." I burn another cd and do the same ... the same problem.
I try to create the partitions at the end of the hard disk not the beginning although I am sure that there is no error in the hardware but the same message. Lastly I change the boot to be created in sda 9. The same problem, when I do everything. I download Linux mint another operating system and do the same points. The same error message appeared by the way the boot is being damaged after restarting and I have to fix it from suse linux cd.
I have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."
Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?
Each time, different methods, I get this about 3/4 of the way through:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.
Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?
I've recently converted two Ubuntu 10.04 (one 64, one 32bit) machines to LibreOffice. We've used OpenOffice.org since early 2.x The issue is a database file created in OOo and now needing to be accessed in LO. As far as I know, there shouldn't be any issue with file compatibility. On the 64 bit machine, (a Ubuntu server installation - not headless) the file opens with no trouble and is fully accessible. (forms, reports, tables, etc.) However, on the 32 bit machine, trying to access the file over the network on the server via samba (because we also have Windows machines on the network, so I serve it all up via samba) I am able to open the database, but get the following error when trying to access any table, form or report: The connection to the data source "Mattress Prices" could not be
established.
[Code]...
can we find logarithm to base 10 instead of base 2 on shell script??i can do it with bc..like 'l(1000)/l(10)' | bc -l
View 1 Replies View RelatedDoing "ls -a" provides a listing of the hidden files.To process all the .bak files you can do *.bak for:
that.bak
this.bak
But how do you process all the hidden files like:
.that.bak
.this.bak
What is the equivalent of *.bak for only the hidden files?
I am looking for some suggestions if possible, regarding processing the files using perl script. Scenario is I have a location where new files will be added always. I need to process these files for some validation. I wrote a perl script to do this and I thought I can rename the files once they are processed in that way I dont process the same files again. But now I can't rename the files due to some restrictions. Second thought, to process them based on date stamp but as my perlscript is being automated and runs every one hour to process the files I can't go by date stamp.
View 5 Replies View RelatedI'm running apache2 and I installed php5 with yast. httpd2 -M states that php5 is loaded. /etc/apache2/conf.d/php5.conf is being included in httpd.conf and it contains:
Code:
<IfModule mod_php5.c>
AddHandler application/x-php .php
AddHandler application/x-httpd-php .php4
AddHandler application/x-httpd-php .php5
[Code]....
The first line was added by me since that's what mime.types actually contains.
php.ini is in /etc/php5/apache2 and since I was not sure apache/php was finding it I added a PHPIniDir "directive" into httpd.conf. I have not changed it.
Test file is the typical /srv/www/htdocs/info.php with <?php infophp(); ?>
Normal index.htm is working fine. php -a is working fine.
I spent a long afternoon around this configuration and I looked in plenty of pages for solutions. I only do occasional system administration so I might have easily overlooked something trivial, but I run out of ideas.
There is a thread in this web site with a similar problem but no solution:
Php5 not recognized in SUSE 10.2 Apache2
What could be missing/wrong if php5 is loaded and the addhandler is defined? How can I further test?
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies View Related