Ubuntu Networking :: Installation Of Cisco Linksys E1000 In 10.04?
Jun 2, 2011
I can't install/configure this router. I have my PC connected to it via ethernet cable, and Ubuntu sees the connection, but I can't connect to the internet and I can't access 192.168.1.1. I've searched the forum, and I know there are a lot of threads on this, but neither were helpful and since the CD has only win drivers, I couldn't install anything.
I can access the internet through a phone using WiFi though, so theoretically everything is working, I just can't use it with the PC.
View 5 Replies
ADVERTISEMENT
Aug 21, 2010
Okay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
View 2 Replies
View Related
Jan 13, 2010
I'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.
Ubuntu distribution : Hardy Heron (updated)
Desktop Environment : wmii
lsusb :
Code:
Bus 007 Device 006: ID 1737:0077
Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
[Code]....
Tried startup with device connected, no success.
Read some threads which generally correspond to version 2 of the device.
It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.
View 2 Replies
View Related
Mar 31, 2010
I don't why this is but we have WiFi working on our computer. The only problem is that when I search for LinkSys folder or Cisco folder nothing shows up. Is there something I need to do for that? I have tried to search for it in the folders themselves by doing a search but nothing comes up.
View 7 Replies
View Related
Feb 28, 2011
Installed CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies
View Related
Jul 16, 2010
I just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
View 9 Replies
View Related
Jan 12, 2011
I am using ubuntu 10.10 and facing problem with cisco VPN connection. VPN connection is getting successful but not able to connect to destination servers.I also tried to add default gw to the the IP which is assigned to my VPN connection but still access to VPN machines not working.
View 1 Replies
View Related
Feb 28, 2011
I use VPNC to connect to a Cisco VPN. I am able to connect, but some issues exist when I use SSH. For example, I login through SSH to a computer in the VPN and I execute ls => it works. If I execute ls -la => connection stalls. I think it stalls every time it is supposed to return more content (top, ls /etc).
If I do scp from my end to server => works. If I do scp from server to my end => connection stalls.
View 1 Replies
View Related
May 7, 2011
I'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.
View 9 Replies
View Related
Feb 11, 2010
Put all Cisco drivers and firmware for wireless in a new ubuntu 10.04. I love ubuntu and I have a big problem with a mini pci wireless Cisco Airo MPI 350...
View 9 Replies
View Related
Dec 3, 2010
When I try to connect to my company's VPN using the Cisco VPN client, I get a kernel panic. Please don't suggest I should Cisco's client, it only works with Kernels older than 2.6.24 (I have 2.6.35).
So I use vpnc. The error message is:
Quote:
$ sudo vpnc
[sudo] password for phirt:
Enter password for user@group@fubar.net:
received notice of type (ISAKMP_N_NO_PROPOSAL_CHOSEN)(14), giving up
vpnc: quick mode response rejected: (ISAKMP_N_INVALID_MESSAGE_ID)(9)
this means the concentrator did not like what we had to offer.
Possible reasons are:
[Code]...
View 3 Replies
View Related
Jan 21, 2011
When I connect to my company's VPN (it's a Cisco), it connects just fine and displays the broadcast message, but once connected I can't ping anything or ssh anywhere. Not on the private network, not on the Internet [URL], nothing. I can still browse the web without difficulties when connected to the VPN, but no ssh or ping. With ping, it properly resolves the host name, but I get 100% packet loss.
Once I disconnect from the VPN, a ping of [URL] works exactly as expected.
I don't have any firewalls set up on this host that I'm aware of (unless something is installed and configured by default).
I'm using Ubuntu 10.10, amd64 build.
View 5 Replies
View Related
Jul 8, 2011
I have just installed Ubuntu 11.04 and the Cisco VPN client with :
apt-get install network-manager-vpnc
I have imported the PCF provided by my employer into the GUI. The group password also seems ok, when I login to the VPN server, I am provided with the "VPN Login message". (On Windoze, I get an Ok/Cancel popup with the same message). In Ubuntu, I don't get to click "Ok" but it looks like I'm connected properly. The /var/log/syslog file contains numerous static routes added, 30 or so. After the Login Message, I see the couple of line:
Jul 8 12:40:51 ubuntu02 vpnc[1613]: can't open pidfile /var/run/vpnc/pid for writing
Jul 8 12:40:52 ubuntu02 NetworkManager[630]: <info> VPN connection 'VPN to my network' (IP Config Get) complete.
I get an IP from the external network correctly as well:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:172.16.10.170 P-t-P:172.16.10.170 Mask:255.255.255.0
However, I cannot ping any of the machine on the remote network. None of the network services seems to be accessible. Why the machines on the VPN are not accessible?
View 2 Replies
View Related
Jul 20, 2011
I'm using Ubuntu 11.04. I'm trying to get a Cisco Valet Connector AM10 to work. It's one of those ZeroCD USB devices that is both storage and modem. Using this link:
[URL]
I filled out usb_modeswitch like this:
Code:
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
[code]....
View 9 Replies
View Related
Feb 23, 2010
I've tried to solve this off and on for a few months, but I just can't.I am a windows engineer but wanted to expand my knowledge to Linux.I deperately have tried to get WIFI working but it just wont connect.I am using Ubuntu 9.04 as 9.10 was a problem with video driver.Initially after build I could see my network on the list, but it was greyed out.After trying a few things on the forum I have now installed a windows driver using ndisgtk which now means I can choose my wireless network from the list.Although it does seem to try with the connecting message and asks for the password, it just doesn't connect on.
Things that may be of use am using WPA/WPA2 hardware of machine is IBM Thinkpad T30 (not one of there better models)I work from home and my work machine is working fine, along with all the other wireless kit in the house, it's just this machine.
View 9 Replies
View Related
May 2, 2010
i got the new Ubuntu 10.04 and manage to get my cisco aironet wireless adapter 340 series working on my wireless dlink modem , but the problem is when i have the wep security on the modem the cisco wont connect
View 1 Replies
View Related
Aug 23, 2010
I installed Cisco Anyconnect VPN client from the university website, to connect to the VNP. On Windows Vista everything worked fine without problem, while on Kubuntu 10.04 the installation has been OK, but when the client connects, my internet connection drops, so I'm not able to do anything!How should I fix this?I'm currently using an adsl, connecting through pppoeconf.
View 3 Replies
View Related
Sep 17, 2010
There was quite a bit of threads about this card, and getting it to work mostly boils down to downloading Ralink's propitiatory driver. The card uses RT2870 chipset, and Ubuntu comes with two drivers that are supposed to support it, neither of which seems to work with WUSB600N. One of the drivers included with Ubuntu detects networks operating on 2.4GHz but fails to connect to them, but does not detect 5GHz networks at all.
I was wondering if anybody knows what is so special with this card that it doesn't work with drivers that are shipped with Ubuntu? The card works nicely with Ralink's driver, but it's a bit annoying to have to recompile it on every kernel update (would be much nicer if it worked with stock drivers).
View 3 Replies
View Related
Mar 31, 2010
I did a forum search and too much came up that was not the answer I was looking for. I have only Linux devices at work and I was wondering how do Linux Administrators connect to Cisco devices via serial console cable. Cisco recommends 'Hyper Terminal' which was a Windows add-on applications licensed to XP. I think Vista and 7 no longer have the license to use Hyper Terminal. Regardless I don't have any versions of Windows and would like to use a serial cable from Com port 1 to the console port on the device. I can't use SSH since some devices don't support SSH and or I have to do a password recovery.
View 4 Replies
View Related
Jul 21, 2011
I'm setting up my first Linux laptop with Ubuntu 11.04 and my CB21ag wireless card works, but won't achieve speeds over 11Mbps (maybe not "doing 802.11g rates for some reason?) I guess this cardbus card is manufactured by Atheros for Cisco so I maybe that's why I'm seeing two wireless connections - the one with the "airo" driver gives me 11mbps, the other with the ATH driver would only get me 1mbps so I deleted that. The card seems to disconnect/reconnect periodically too - messages pop up frmo the wireless icon ...
lsmod says "airo" and "ath5k" are loaded
So to get 54Mbps (802.11g speed) I'm wondering if theres maybe a different driver module for the CB21ag card or some configuration I need to tweak. More info - security is static WEP, lshw -C network returns some "wierdness" about network 0 ?
-laptop:~$ lshw -C network
WARNING: you should run this program as super-user.
*-network:0 DISABLED
description: Wireless interface
product: Cisco Aironet Wireless 802.11b
[code]....
View 7 Replies
View Related
Aug 23, 2010
I have loaded Suse 10.3 on a system that has 4 Ethernet ports, all Intel chipsets. 2 ports have the 82571 chipset, 1 port has the 82573 chipset and the last one has the 82567. The 82567 chipset can use the e1000 driver and the 8257x chipsets require the e1000e driver. We are only actually using the 82571 ports.
When the system is booted, the 82567 seems to get bound to the e1000 driver and the 82573 gets bound to the e1000e driver. Doing an "lsmod" I see both drivers loaded. It appears the 82571 drivers are getting bound to the e1000 driver which is a major problem. They work for a while but eventually they lock up with enormous error counts according to "ifconfig". How I know the e1000 driver is bound to the 82571 ports is that when I remove it(modprobe -r e1000) and then try to use one of them, I get a "network unreachable". When e1000 is loaded these ports seem to work fine. I tried modding the file in /etc/sysconfig/hardware that corresponds to the PCI address of these ports(i.e., hwcfg-bus-pci-0000:08:00.0) to force the module to e1000e, but no luck there either.
View 1 Replies
View Related
Mar 11, 2009
Is using Cisco AnyConnect for ssl remote access, i loged on on my company vpn.abcd.com , using a username and a password, requested a certificate which was added to Firefox certificates, then installed the AnyConnect client. now i can just start the AnyConnect client to connect without the need to access to my company vpn.abcd.comWhat i want to do is to add a vpn connection to the network manager so its always connected once i powered my computer on, and dont need to start the AnyConnect client to get connected each time.
There were three options Password/SecurID, Certificate(TLS), Certificate(TLS) with TPM.I tried the first one, got a message "Unknown certificate from VPN server "vpn.abcd.com". Do you want to accept it?" , accepted entered my password ---> login failedThe other two options need a certificate files which i dont know how to get, is it the firefoxcertificate, or what ?.
View 2 Replies
View Related
May 9, 2009
Just wanted to ask a small question... I've set up a VPN connection to my university and i installed and configured everything ok, cause I can connect without any problems...
Now that I'm connected I want my browser to run through the VPN tunnel created by the connection so i can access certain sites that are else inaccessible, but how do i force my browser (I'm using firefox atm) to do that?
When I'm on MAC of Windows OS, as soon as i connect with a VPN, all connection run through them. Fedora seems to ignore the VPN connection and just continues to use my home-network to connect to the internet.
So the basic question is: how do i use the VPN connection.
Iuse FC10, kernel 2.6.27.21-170.2.56.fc10.i686, fully updated system
View 4 Replies
View Related
Jun 18, 2009
Probably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
View 14 Replies
View Related
Jun 30, 2010
cisco vpn client 4.8.5 I have no problem to connect it, but got disconnected every minute after I opened a terminal and ssh to company's server. Not sure what's causing the problem. There's no problem to connect to windows.
View 2 Replies
View Related
Mar 7, 2011
Problem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:
"/usr/sbin/vpnc: no response from target"
No problem when connecting with ubuntu or windows.
View 1 Replies
View Related
Jul 27, 2011
I have router based on CentOS system with DHCP server. In one eth I have fiber converter attached in second one I have Cisco Catalyst switch connected. From the switch rest of ports are used to provide internet traffic to rest of network. I wanted to divide each segment of network (based on switch ports) that they don't see each other (it'll be good for me if someone will connect his wireless router to the network not to WAN by LAN port and start be a second DHCP server). So my network configuration:
CentOS:
DHCP with range 10.0.0.1/8 network
Switch ports
1 - CentOS DHCP
2 - second server
[code]....
Parts of networks I've assigned IPs 10.network_part.subnet_part.client_ip so I have addresses for clients: 10.1.1.2/8, 10.2.1.3/8, 10.3.0.4/8, etc ...
I've decided to give each port it's own VLAN like below:
Port / VLAN
1 / trunk
[code]....
I've configured switch ports by using:
(config)# interface Gi0/Port_Number
(config-if)# switchport access vlan VLAN_NUMBER
[code]....
And after doing that whole network stopped working. I think that cisco part of configuration is OK (at least customer ports, I don't know if there is any additional info needed for trunk port). On CentOS router I didn't setup anything regarding VLANs ...
View 4 Replies
View Related
Mar 1, 2011
I was given a Cisco IP Phone (model 7962) and CyberGuard Firewall/VPN (model SG300) from my company. So that I can work from home. But I've been struggling for the past couple of days trying to get it to work. The phone successfully configures it's ip; but it hangs on "Registering".
The setup is such:Cisco phone plugs into the CyberGuard and gets assigned a private IP address; 192.168.48.34; from the CyberGuard.
CyberGuard plugs into my Slackware (12.1) box and gets assigned a private IP address; 10.0.0.191; from the dhcpd server on my Slackware box.
Slackware box then masquerades that 10.0.0.191 into my static public address on the internet.
Port 1723 (PPTP) is open in the iptables firewall on my Slackware box. I've also tried disabling the firewall (ie opening all ports) on my Slackware box.
On my Slackware box; via iptraf; I can see traffic between my Slackware box, the CyberGuard, and my company's server.
Traffic such as:
Code:
And on the company's server; the following is observed:
Code:
My company just keeps saying "open port 1723 + 47". But as I stated above; I have opened them. And Internet searches have revealed absolutely nothing. At this point; I am completely lost as to what may be wrong.
View 5 Replies
View Related
Feb 4, 2010
I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
View 1 Replies
View Related
May 31, 2011
I bought a Cisco 1841 to study for a cisco certs. In iptables terms filtered packets are -j REJECT instead of -j DROP. To make things worse telnet and ping replies are on by default.
View 5 Replies
View Related
