ive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
finding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies View RelatedI have been given an Edimax EW7318USG wireless adaptor,no drivers.I download 2008_0506
_RT73_Linux_STA_Drv1.1.0.1.tar.zip from [URL]..onto my Linux computer using an adaptor from another computer.but cannot find out what to do next:. I have just installed Fedora 11 from a Linux Format magazine DVD.
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
Looking for driver for Linksys Wireless Notebook adapter WPC55AG
View 1 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
Does Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies View RelatedI have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
04:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)i can't find the driver for linux, i tried to mask install of a windows version but was unable to get the drive to function correctly. the os is backtrack4 rc2 running 32bit
View 1 Replies View RelatedI bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
I am using ubuntu 9.10. Kernel version is 2.6.31-14-generic. I couldnt find driver for Atheros wireless card which shows in 'lspci' 0c:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
View 9 Replies View RelatedThe Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.
View 4 Replies View RelatedI'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine.
2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both.
3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table
iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.
View 4 Replies View Relateddesktop has been running Ubuntu 10.10 just fine since December. Today, the connections menu shows nothing but "Wireless Networks: disconnected." My laptop is inches away and has a full connection.I'm not sure what diagnostic tools I have at my disposal. The one thing I've been able to do is lspci. The relevant output of sudo lspci -v | less is:
03:05.0 Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: RaLink EW-7108PCg
Flags: bus master, slow devsel, latency 64, IRQ 20
[code]...
Found about this website in vector linux site,you can check before you buy if the wireless adapter works with linux or not, so I think is a good tool to check wireless adapters by manufacturer, interface or chipset, it even have links to the drivers websites,
[URL]
finding a tcl code for cognitive wireless network scene
View 4 Replies View RelatedI need a simple traffic monitor for Linux, that counts the traffic in a specific wireless network because I have volume restrictions on that one.I tried it using the following iptables rule:
[code]...
iptables -m mac -A INPUT -p all --mac-source <mac-address> ! -s 10.0.0.0/8
where <mac-address> is the router's one. 10.0.0.0/8 is the local subnet. What I actually want is something like --routed-through <mac-address>. Also, is there some way to gather iptables's statistics? Or is there maybe another tool that does what I want (reliable)?
I installled Ubuntu 10.4.1 on a brand new computer with a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller on a Foxconn G41MXE motherboard. and I have been unable to connect to wireless network. I have gone through the wireless trouble shooting guide to no avail. When i "check for device recognition" i get the following (note the is no CLAIMED UNCLAIMED ENABLED OR DISABLED)
udo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
[code]...
I have a older Dell desktop running a older version of Ubuntu 9.04. I recently got a Belkin N300 micro wireless usb adaptor so I could use it to connect to the internet. I have a Verizon MiFi 2200 wireless router that I use for internet access. The desktop won't recognize the new hardware. It came with a driver disc, but it's for windows.
Will this adapter even work with linux?
If so, how do I get it to work?
I have a usb wireless adaptor that I sometimes need to remove from the computer, but often it locks up my system upon removal, even after typing "ifconfig rausb0 down" Is there a Linux equivalent to the windows "safely remove hardware" applet for usb devices?
View 1 Replies View RelatedI have two nic's connect to different networks. I would like to use one to pick up my email and connect to skype and the other for general internet access. Is this possible?
View 2 Replies View RelatedI set up an older computer with Ubuntu 9.10 and tried to get my Linksys AE1000 Wireless N adapter to work. My first mistake was not checking in advance to see if this adapter would work, but I have taken the leap and I am intent on making it work. I ran lsusb and it gives me a device number (13b1:002f) so I know it can be seen and I have also installed indisgtk the GUI for Wirless drivers. I have tried some suggestions from other posts to no avail.
View 9 Replies View RelatedI just recently moved somewhere and the internet is wirelessly provided by the whole condo building. It is just a free and open network but I am trying to find a way to hook up my Xbox 360 to the internet. I do not have a wireless adaptor or a spare router, what I do have is my ubuntu laptop. Is there a way I can hook my xbox up to my laptop and bridge the connections so that I can finally connect to xbox live via my laptop?
View 2 Replies View RelatedThe only connection to internet I have is via usb adaptor sitecom WL-352, under windows XP. Now I installed Ubuntu 10.10, and I cannot connect to internet via wireless. How can I do to use this adaptor?
View 4 Replies View RelatedI have configured my PC to run a linux 2.6 kernel in VMware and have no problem loading the image and using the wired network adaptor and the basic functions. I am having trouble finding the wireless network however. My Box has an " Intel(R) Centrino(R) Advanced-N 6250 AGN " wireless network adaptor. From what I can tell, this is supported by this version of linux. I have the adaptor enabled, my image settings as bridged, and the wimax enabled in the removable devices (connected). When I run WiCD manager I get the error message " Could not connect to wicd's D-Bus interface "
View 1 Replies View RelatedI installed CentOS 5.4 on my desktop yesterday after facing crashes from Ubuntu 9.04 Everything worked fine and few didn't which I could resolve, but this problem is absolutely strange to me. I've USB wireless adaptor Belkin F5D7050 v4000 which uses a zydas zd1211 chipset. The problem is that I've not been able to connect to internet or even in the local network. (I've this another Laptop (Windows Vista) which can connect to internet and thus I can post and download stuff.)
I read the CentOS wiki [URL] to setup the wireless network and it asked me to download a firmware for it.. I downloaded and installed the firmware from the specified location but to no respite and I can't connect to network. now the strange thing is the result of iwconfig which was here even before installing the firmware. iwconfig shows
[Code]....
I installed fedora 14 on a server appliance . After that , i decided to change the hardware , but now i have a problem !!! Fedora 14 on new appliance can not recognize network interfaces (eth*).
View 3 Replies View Related