I'm running Joli Cloud 1.2 on my HP dm1z netbook and for some reason, it doesn't seem to recognize my wireless card. Because the HP dm1z has no ethernet port, I had to use a USB adapter to connect to the internet.
View 2 Replies
I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
View 1 Replies View RelatedWindows says I have a intel wifi link 1000 bgn card however lspci list it as a intel wifi link 100 series. I can not get it work right and does not seem to be recognized.
View 2 Replies View RelatedHere are the specs for the computer in question:
Distro: Mint 10 Julia Gnome
Dell Inspiron 1100
2.40 ghz Intel Pentium 4
8 kilobytes primary memory cache
512 kilobytes secondary memory cache
20 GB HDD
1 Gig MB RAM (2 512mb sticks)
Linksys Wireless-G Notebook Adapter WPC54G V3
CDRW/DVD Optical Drive
From the title of this post, you can see that I am having some trouble getting the Linksys Wireless-G broadcom card working. I have been doing some research and have heard that getting a broadcom card to work in Linux can be a real pain.
I have verified that Mint 10 recognized PCMCIA so I am good there. I installed Wifi-Radar to see if maybe it would recognize it but it did not.
When I type iwconfig, it does not show any wireless signals available. When I originally set up the partitions for this laptop, I used PartedMagic and was able to quickly set up the network on that with vertually no problem what so ever.
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies View RelatedI have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies View RelatedDo I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies View RelatedI have an Acer Aspire 5516 and have been running ubuntu for a while. I couldn't resist the upgrade notice to 10.04 so I did it. Unfortunately it doesn't seem to recognize my video card ATI Radeon X1200 and I have to boot in safe graphics mode. I can use my computer but the display is a bit off. I have tried to install the ATI driver but get the following:
ATI Technologies Linux Driver Installer/Packager
Error: ./default_policy.sh does not support version
default:v2: x86_64:lib32::none:2.6.31-14-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.eqUOxU
I have a WUA-2340 USB Adapter manufactured by D-Link. This is my first day using a Linux based cloud OS I need some drivers for my USB Wlan device.
View 4 Replies View RelatedI have recently installed Karmic to a portable hard drive (WD elements 500gb) so that when it is plugged in the grub can boot and i can go into ubuntu 9.10 and when it is out windows 7/vista dual boot screen shows. When in ubuntu, there is no driver for my 'NVIDIA GeForce 9200M GS' graphics card available so i am stuck with the no effects mode and the games are poor.
Previously i had this same setup (but with jaunty) and the graphics card worked well, i could have all the wobbly window effects etc, but now i can't have anything.How could i get a driver for this?BTW, it is running through USB 2.0, although it is very fast.
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
View 2 Replies View RelatedI have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View RelatedSo the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
View 9 Replies View Relatedi bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
View 14 Replies View Relatedmy cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies View RelatedI just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration
View 2 Replies View RelatedI messed with some settings (not exactly sure what I did) while trying to get a USB headset to work, and now I have no sound at all. It's acting like it doesn't recognize any soundcard (I'm using a Thinkpad W510 with integrated sound).
View 5 Replies View Relatedwhen it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies View RelatedI have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.
My laptop is HP nx6110 if that matters.
Here is the situation:
When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.
If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).
In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:
It seems that the card is detected right.
Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.
I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.
No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.
Tried to find (and reinstall) drivers:
Code:
No Matches found
Code:
Here is the output of lspci. The output is the same if the wifi card is connected or not.
Code:
LAN connection is working just fine.
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies View RelatedI cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
As a part of my final project,i am beginner and this is the first one that i have the opportunity to work under linux fedora,my task consist to develop with C a driver of wifi by using the SDIO Wifi card as an interface. This driver will be included in a digital receiver TV.
View 2 Replies View RelatedMy Ubuntu Netbook Remix 9.10 on my Asus EEE PC 1000HE computer does not recognize SD card."sudo fdisk -l" command does not result anything related to SD card even when the card is in the slot.
View 1 Replies View RelatedI'm running Ubuntu 9.10 on an older Compaq Evo D310. When I do a search of my video card I get "01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF", which is the integrated card on the motherboard, but I'm actually using an Nvidia GeForce 2 MX 400. At least that's the card my VGA monitor is connected to. How do I get Ubuntu to recognize the Nvidia card? I'd like to try installing an nvidia legacy driver for it to boost performance. Thanks.
View 2 Replies View RelatedMy Ubuntu 10.04 will not recognize my used cards at all. If it will not recognized them, I cannot format them.
View 5 Replies View RelatedI have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
View 9 Replies View RelatedMoving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Today I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
View 4 Replies View Related
