I would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
I can't seem to get Japanese input working with scim-anthy. I have scim 1.4.9 installed and the daemon running. I have the scim-anthy 1.3.1 package installed as well. I can open and modify the scim-settings, but I can't get the anthy dialog to appear. Apparently, ctrl-space should bring up the dialog, but nothing happens. I tried following the instructions on this page under "Open a program with japanese input enabled - via command line", but still no dialog. After starting the daemon, I tried:
Code: XMODIFIERS='@im=SCIM' LC_CTYPE=en_US.UTF-8 gvim And no luck. Note that I don't really understand what that command is supposed to do. Should it be something different?
I can't input Japanese charactersn KWriteough the input works in all other applications as far as I know). Does anyone have an idea what the cause might be, or what I should be looking at?The point is not that can't see the characters (but e.g. gibberish instead), but that the characters that I type in the input bar are not transfered into KWrite upon commit.
View 1 Replies View RelatedI finished my installation of Slackware 13.37, but I found I cannot input chinese using pinyin in KDE. Of course, I started "scim input method", I mean I can see the icon of keyboard in the tray bar, but I cannot swith input method into chinese with "Control + Space".
View 14 Replies View RelatedI am running KDE 4.5.1 on Ubuntu and came to Ubuntu from Windows, On Windows they have a very sophisticated Input Method for typing foreign characters especially symbolic ones like Japanese.
I find that while Linux makes a lot of things so much easier than any other system, I have yet to figure out how to get any sort of input method running on Ubuntu (KDE Desktop).
It's important for me to be able to type hiragana, katakana, and kanji as I'm learning the Japanese language. I've browsed forums for about 2 weeks giving examples on Ibus, uuim, and some others but even though Ibus works a little buggy on Gnome I really need an alternative that's works well and with the KDE desktop.
Additionally, I have never seen any method (that did or didn't work) with installing Japanese font, everybody just said it was tricky.
I originally made this post in Linux-General, but only one person was really answering the question and now he hasn't been responding, so I've come here since Scim is also Slackware related.Simply put, I need to be able to use Scim to input the Korean language.Here's the original thread:[URL]
View 14 Replies View RelatedFor years I have been using scim-anthy for Japanese input under Linux. However just moving to ubuntu 10.10 I noticed that the development for scim has ceased and lots of people recommend moving to ibus. So I tried: I got ibus and ibus-anthy installed. I choose ibus as keyboard method input system under System->Adminsitration->Language Support ibus is up and running. I can see the icon. In ibus opreferences I added anthy under Input methods. I restarted X resp. the whole computer. I can choose Japanese-Anthy when clicking on the ibus icon. But nothing happens. I am still writing latin characters, no anthy popped up (like it used with scim), nothing.
View 2 Replies View RelatedYesterday my Japanese input on F11x64 broke horribly. I have been using iBus all along, and didn't think I did any upgrades, but maybe there was a restart that picked up something previous. As soon as I hit the key to turn on the input method to type Japanese there would be a python process using 100% cpu, but no keyboard input. After fiddling about reinstalling python, iBus, scim and anthy and anything I else I could think of, I decided to upgrade to F13 to see if it would fix it. (trying to use scim instead of iBus hung the machine during start-up after login (I'm using KDE too if that makes any difference)). I did an upgrade instead of a fresh install fyi...
F13 is no better, and has the same issues with the python process. I have tried reinstalling everything again, as well as trying to avoid scim altogether, and just running iBus and Anthy. (The only other issue that I can think of (that prompted the initial restart) was that my .xsession-errors file in my home directory became huge -> 1.7gb!) Japanese input is crucial to my work (It doesn't even work if the default language of the system is set to Japanese), so hope someone has some ideas on how to resolve this, or even just knowing tha japanese is working for someone on a x64 KDE install would be encouraging...
I know it is possible, and I have been trying everything I can find, but I can't seem to get it to work. I went to languages in YaST and enabled Japanese as a second language, and I have tried adding japanese as a secondary keyboard layout under configure desktop-> regional and language settings. I have a little flag in the system tray that I can click to change from US to Japanese, but all that does is change what the punctuation buttons do.
View 9 Replies View RelatedI was recently surprised by this SCIM stuff that seems to screw around with my normal text input. I try to be curious and approach my issues with an open mind, so before I try to remove SCIM, I want to know what the hell it's supposed to do.but it's not obvious to me
View 3 Replies View RelatedI've installed 11.4 KDE x86-64,which downloaded last night,a GM version. Things working great except 2 thing : SCIM & wifi.SCIM Chinese input works great when 11.3 KDE,but in 11.4 KDE it ONLY works in Dolphin,not works in Firefox.........
View 5 Replies View RelatedWhile I can find my way around most things, terminals and desktop managers are different than I remember. One of the biggest problems that I am encountering today is that when running a gnome terminal (this is Suse 10.0 enterprise), I'm getting behavior in the window that I don't want. Specifically, when I type, my typing is underlined as if something is trying to spell check my window. Further, it seems as if when running vi or less, my keystrokes are only processed by these apps when I hit 'return'. I.e. if I'm running less and want to go back a page, I'll hit b, but nothing happens until I hit 'return'.
I seem to have tracked this down to the 'input method". Right clicking in the Gnome terminal allows me to set my input method to one of a dozen values. It seems that currently, it's set to "SCIM Input Method". If I then select 'default' or 'X Input Method', apps (i.e. things like less, vi, and even the bash shell) behave as I would expect.
a) what is this SCIM input method
b) how can I make it so that it is not the default?
I've poked around various configuration files in my home directory as well as in /etc, but I can't see to find how this is set.
Anyone knows a good input method for japanese writing in openSuSE 11.2 ? I tried to find something that works well (like microsoft IME) but unfortunately couldn't find anything...
View 3 Replies View RelatedBefore I upgraded to Karmic, I had Japanese text input set up on my system, but since the upgrade it no longer works. I can still read Japanese text, and when I press Ctrl+SPACE I still get the ANTHY box in the bottom right-hand corner, but Japanese is no longer on the list of supported languages. how to get Japanese back?
View 1 Replies View RelatedI've tried installing both ibus-anthy and ibus-mozc in Jessie but I still cannot input Japanese.
By contrast, In Wheezy, when using anthy for example, I can see ibus preferences icon where I can configure ibus and anthy. This doesn't show up in Jessie.
I have a file with two fields of numbers that I want to use as input for another program.
Code:
The above code does not work, as I think it would take the whole first and second fields as the input for one particular instance of the program 'inputbashangle'. What I want is to get the first two numbers from the first line of the file 'outfailtest', execute 'inputbashangle' with them, then move on to the first two numbers of the second line for all the lines of 'outfailtest'.
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
I am learning japanese and I would like to be able to switch between english and japanese input while keeping an english interface. How would I achieve that? I am using KDE, by the way.
In the Kiten documentation I read that pressing Shift+Space would enable japanese input (built-in in Kiten, according to the documentation). But that does not seem to work in my system.
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 Replies View RelatedI have what seems to be an incomplete or incompletely configured configuration of SCIM on my Netbook running Linux Mint(Gloria).To tell the truth, I am not even sure SCIM is the best choice, since I see claims (in LQ forums) that SCIM has been discontinued, and I cannot connect to the SCIM website.So what I want to do is get SOME Japanese Input Method working under this installation of Gloria, for now, I presume SCIM is the right choice for its front end. But I am certainly open to other suggestions.But I must shrink from the idea of installing language support for all languages, which is what Control Center>Language Support seems to threaten to do: it is only a Netbook, I can't afford to waste that much space.
what I see is the above Control Center option, and one other that must be relevant: ControlCenter>SCIM Input MethodSetup. But I don't see any documentation for this, and the menu item names are vaguely suggestive of their functions, not descriptive. So I am quite unsure which of them I need to use to get it working. Is it true, for example, that SCIM itself does not include the Input Methods? I have to download a Japanese IME from somewhere else? Which one? Is that what Control Center>Language Support will do? What DO they mean by "Front end module"? Why does SCIM only recognize an English keyboard layout and a "RAW CODE" (in IM Engine Global Setup)? have Greek and Russian layouts enabled on this machine, too.So now that you have a pretty good idea how disorienting I find the current situation, please point me to something that will clear up the confusion and possibly even give a list of step-by-step directions for getting a Japanese IME working on this machine.
I can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
I Just got the ADS VideoXpress video capture USB thing (Plug composite video and audio into it, and plug it into a computers USB port). Anyway, I've tried to install what came on the CD, with Wine, but still cant view any video. I don't need it to record from it, I just want to view the video live as it passes through. I don't even need audio, just the basic low quality video.
Anyone know where I can find a program to view the raw input?[URL]..
I am using Red Hat Enterprise Version 5. There is a ruby program which use standard input as its input (e.g. the Ruby program process input from standard input). I think standard input should be keyboard, correct?
So, I think other kinds of input (non-standard input) should not work (i.e. the ruby program should not be able to read input from such non-standard input), but actually I have tried using pipe works, I am so confused because I think pipe should be some other kinds of input -- other than standard input, why it could work? i.e. put text "123" in abc.txt with pipe, could achieve the same result as using keyboard as input to type "123" for the ruby program.
cat abc.txt | ~/test/rubysrc/foo.rb
I am creating a 15 integer array which is input from the user and outputted for the.
Ex.
Enter the array values: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Your values are: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Code:
i have to write a program which checks the information inside a text file to make sure it is all integers and then convert the integers to roman Numerals. My program seems to have a bit of a problem and im not sure where exactly the problem is....
Code:
#include<stdlib.h>
#include<string>
[code]....
I started to run a C++ my program in Linux and I don't know how to test my program that works fine with a text file. This is a project for my uni and to explain more clear, My program is a sample database for modify or add and search and it read data from a binary file and also write into a binary file. I have got an input from my lecture and she said after compiling in Linux I must write:
1-to compile:
Code:
g++ (files with cpp)
2-to see the output:
Code:
./a.out
3-to test with input:
Code:
./a.out < input.txt >
My problem is in step three. What I must write in the command part after" step2" to see the output?
i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
[Code]....
I have a machine with 8 cores. I have a directory of input files that I need to process using a non-parallelized program. I would like to write a script that works its way through a list of commands executing 8 commans (i.e., instances of this program; each with specific flags having to do with the current input file) until the list of commands has been exhausted. Is there an easy way to do this?
Code:
hamstrsearch_local-hmmer3.pl -protein -refspec=lotgi_2713 -hmmset=lophotrochozoa_hmmer3 -sequence_file=Aplysia_californica.fas -taxon=ACAL
Title : Author : Price
France : Mark : 40
Persia : John : 50
how i arranged my database. I am trying to write aprogram which does a search either using Title, Author or both.
[Code]....
but i am still unclear on how i am able to make the program check if either on of the input(either $Title or $Author) is not filled up, and if one of it is not filled up, use the other one which is filled to do a search.
basically i have to create a simple program with will continually read input from the user until they enter a blank linei know how to read in certain input but not sure how to get it continually in a loop
View 2 Replies View Related
