i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
[Code]....
i need to write a c code to ping IP addresses which are read from a text file and need to log the response time in another text file.
View 4 Replies View RelatedI have a text file that contains a single word and I want to write a bash script that will read the word from the text file... The following is my incorrect attempt, as it assigns the name of the textfile to the variable as opposed to the word stored within the textfile:(assume I have a text file value.txt that has its contents a single word, say wordone)
Code:
#!/bin/sh
for f in value.txt
do
echo $f
done
so the output of the above script is value.txt, however I want it to be wordone.to summarise: how do I assign the value of the word contained within a textfile to a variable?
basically i have to create a simple program with will continually read input from the user until they enter a blank linei know how to read in certain input but not sure how to get it continually in a loop
View 2 Replies View RelatedI am splitting a file based on the values read from an input file. The below one is the script.
1)How do I add the header which is present in the original file to the new split files created?(For eg. pharmacyf conatins header as table column names. The new files created (ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat) are without the header).
2) Also the script is creating 0 byte files for the pharmacyids which are not available in the intial file? Can this be avoided?
for pharmacyf in *
do
tablename=`echo $pharmacyf |cut -f4 -d'.' `
while read pharmacyid
do
grep -w $pharmacyid $pharmacyf >> $OUT/ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat
done< inputfile
done
I'm writing a program which now accepts user input:
Code:
echo "Enter a date in the format YYYY MM DD hh mm ss."
read gregyr gregmo gregdy greghr gregmn gregsc This lets the user input a date and time, such as 2011 06 21 15 12 45, and have each number assigned to their corresponding variable. Later in the program, these variables are put into an equation, and then the terminal spits out the answer. Now I have to have the program read all of the lines from a text file, which is in this format, assign the variables.
I have a script which checks on my jobs that run on some cluster.The script, "script.sh", takes as an input the job-id for the job to be checked. Sometimes I have 100s of jobs and I want to check them all (for successful completion.) I could put these job-ids into a text file, "job-id.txt", each id in its own line.For each job-id, the script would ask me few questions (with a yes or no answers) to see if I want to do some other checks for each job-id.I want to know how may I direct my job-ids from this text file into the script one job-id at a time.
View 14 Replies View RelatedI need a script that dose the following checks if files exists by read input from a file then compares them to the files listed in the directory if they don’t exists the script would report back which file dose not exists. I also need to format the output so that files are grouped in different groups, group A, B, and C and etc based on file name. I would like the output of that do not exists files to be sorted based on second number in the file name than group according. I understand some of the basics of bash scripting something along of the lines of a loop and if statements might do the trick. Below is what I have so far. I don’t car so much about the script reporting back the file exists I prefer to only know if the file is missing and is less than 3 days old. Problem is if a file dose not exists in the reports file the test compares against the wrong file.
Group A
Foo22000.tar.gz
Foo22010.tar.gz
Group B
foo25000.tar.gz
foo25100.tar.gz
Group C
foo26000.tar.gz
Code] ....
a project using bluetooth to send data byte by byte to external devices buti'm not familiar using arrays to read file from another location before sending the data.If you could,do correct my codes.Here's my code,
void loop(){
char Msg[]={"Hello"};
char *start;
[code]...
I have the following problem. I call a C++ program from a Java servlet by using Runtime exec. The OS is ubuntu and I use Netbeans 7.0 with Glassfish 3.1 web server.The program executes but it does not open and write into a specified file in a specified folder. The same C++ program compiled under Windows opens and writes this file.How can I solve this problem in Linux?
View 2 Replies View RelatedAt the moment I got my md5sum checking working which I write to a text file and see below.
If the md5sum works it will write the output to check2.md5 test.txt: OK
If the md5sum fails it will write test.txt: FAILED
How do I write if statement to check the output whether or not the md5sum failed or not ?
check1="/home/ops/Desktop/test1/check1.md5"
check2="/home/ops/Desktop/test1/check2.md5"
cd /home/ops/Desktop/test1
md5sum test.txt > $check1
[Code]....
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
[code]...
How can read the file /var/etc/allInOne.cfg and distribute its contents on multiple cfg files using C language. /var/etc/allInOne.cfg contain the data and the path of each text file.
The source file "/var/etc/allInOne.cfg "look like this:
line1
line2
...
line10
filePath:/var/etc/file1.cfg
line12
line13
...
line14
filePath:/var/etc/file2.cfg
linen
..
filePath:/var/etc/filen.cfg
the result will be :
The expected result is:
/var/etc/file1.cfg will contain line1 to line10
/var/etc/file2.cfg will contain line 12 to line13
/var/etc/filen.cfg will contain linen to linen-1
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
200
300
400
500
600
700
800
900
1000
1100
1200
Person B
1200
1100
1000
900
800
700
600
500
400
300
200
100
How would I go about reading the values for each Person, then being able to perform mathematical equations for each Person (finding the sum for example)?
I have a text file that looks sort of like this:
Code:
blah blah blah
tons of unimportant stuff we don't care about
[code]...
Something very handy to do in a Linux shell, is manipulating files and strings - essentially parsing data. Write a utility which will scan in a text file and search and replace strings. We also want to keep track of how many strings we've replaced.
I know that my command would look like this: <utility name> <filename> <stringToSearchFor> <stringToReplaceWith>
Code: #!/bin/bash
[code]....
trying read serial COM port and want to write that received data to file, now its writing only one sentence, but i want to write full file which coming on serial port, as i'm sending file from hyper terminal and reading on linux pc, If i put while loop its not writing anything,without while loop its writing only one line and if send big file then application terminates and then writes to file.But i need do write any size which coming on serial port.Finally i want write full file which is coming on hyper terminal, after writing the file it has wait for next data. This is my code,
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]...
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedI opened a text file and read some stuff. Then I (think) I closed it. Then I tried to open another one and it stopped working. It seemed to compile fine though. Why would this be?
Code:
#include <iostream>// Libraries included
#include <string>
#include <fstream>
#include <sstream>
#include <list>
[Code]....
I am new to writing shell scripts. So, please bare with me. I am currently trying to write a shell script which will read the directory path as input from user and will traverse the Dir tree to find all available audio and video files. I have tried to write as much as I could but I don't know where I am making mistake as I get some files to be audio file which are actully tar balls. On the second note there are some files which video but script shows them to be audio. And, some video files are completely skipped. I am giving the shell script below so that you can see. I am using two external files as source which I am attaching.
Code:
#!/bin/bash
#Let's load the extensions that we want to search for
vdExt=$(cat vdExtList)
adExt=$(cat adExtList)
[code]....
i am a new programer in c i have write a simple app and i have a problem with combiling my program include one header file and 2 c
fun.h
#include<stdio.h>
void f();
/******EOF*******/
fun.c
#include"fun.h"
void f(){
[Code].....
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedUnless your distro has taken care of it Centos 5.5, you'll need to create a user with a password and read/write privileges for program database. You can do this using the MySQL command line client if you are familiar with it. Well I am not familiar with it, so I wam wondering how to do it. As well when I run
mysql - p program </usr/share/program/mysql.sql>
It asks for a password. how do i find out this password.
As I'm starting to learn bash scripting I'm trying to automatize some tasks I usually perform. I have a notification mail I need to send several times a day. It has this structure:
Quote:
Dear user,
blah blah blah blah
You need to contact the following people:
[code]...
To replace "user", I found this:
Code:
read -p "Please enter username: " username
echo "Dear $username,"
Which probe to be very useful with other simple notifications like this. But I don't know how to manage the email addresses as they are usually more than one and could vary from 1 to 10. They should appear one above the other. I found this: "Here is a little work around. The only thing the user needs to do is hit enter without anything else on a line and it will close out"
Code:
#!/usr/bin/ksh
word=a
until [[ $word = "" ]];do
[code]....
I tried to use it and modify for my needs but I failed, I don't realize yet how can I use it. If possible, I would like to use the until loop like the above example just for learning purposes but any other form will be accepted as well.
Here's a challenge I've been struggling for months with:
I have a bash script that reads URL addresses of our internal server and then executes some test commands on them. Something like this:
Code:
read -p "Enter URL: " url
sh execute-what-ever-to $url
After copy-pasting the URL the user taps the enter key and the script proceeds, but here comes the tricky part: I want this to work without the need to press the enter key after copy-pasting the URL.
"read -n" does not work in this case, as the URLs vary greatly in length. However, the URLs always end to the same string. They could be like "http://url1/END", "http://url2/END" and so on. So this ending string "END" could be theoretically used to recognize that the whole URL has been pasted.
I am creating a 15 integer array which is input from the user and outputted for the.
Ex.
Enter the array values: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Your values are: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Code:
i have to write a program which checks the information inside a text file to make sure it is all integers and then convert the integers to roman Numerals. My program seems to have a bit of a problem and im not sure where exactly the problem is....
Code:
#include<stdlib.h>
#include<string>
[code]....
I started to run a C++ my program in Linux and I don't know how to test my program that works fine with a text file. This is a project for my uni and to explain more clear, My program is a sample database for modify or add and search and it read data from a binary file and also write into a binary file. I have got an input from my lecture and she said after compiling in Linux I must write:
1-to compile:
Code:
g++ (files with cpp)
2-to see the output:
Code:
./a.out
3-to test with input:
Code:
./a.out < input.txt >
My problem is in step three. What I must write in the command part after" step2" to see the output?
I have been looking for a script example of reading and writing to the parallel port's data, status, and control registers using bash. I see it done in pascal, tcl, etc. but nothing in bash.
View 5 Replies View Related