basically i have to create a simple program with will continually read input from the user until they enter a blank linei know how to read in certain input but not sure how to get it continually in a loop
View 2 RepliesHere's a challenge I've been struggling for months with:
I have a bash script that reads URL addresses of our internal server and then executes some test commands on them. Something like this:
Code:
read -p "Enter URL: " url
sh execute-what-ever-to $url
After copy-pasting the URL the user taps the enter key and the script proceeds, but here comes the tricky part: I want this to work without the need to press the enter key after copy-pasting the URL.
"read -n" does not work in this case, as the URLs vary greatly in length. However, the URLs always end to the same string. They could be like "http://url1/END", "http://url2/END" and so on. So this ending string "END" could be theoretically used to recognize that the whole URL has been pasted.
I need user to input a password through command line in Windows cmd prompt. Is there a way to encrypt the input (such as put it into ......) when user is typing ?
View 2 Replies View RelatedI'm writing a program which now accepts user input:
Code:
echo "Enter a date in the format YYYY MM DD hh mm ss."
read gregyr gregmo gregdy greghr gregmn gregsc This lets the user input a date and time, such as 2011 06 21 15 12 45, and have each number assigned to their corresponding variable. Later in the program, these variables are put into an equation, and then the terminal spits out the answer. Now I have to have the program read all of the lines from a text file, which is in this format, assign the variables.
in gcc how to read a blank line ie a string of length 0.
my code: Code:
#include<stdio.h>
#include<string.h>
#include<string>
using namespace std;
[Code]....
I have a file with two fields of numbers that I want to use as input for another program.
Code:
The above code does not work, as I think it would take the whole first and second fields as the input for one particular instance of the program 'inputbashangle'. What I want is to get the first two numbers from the first line of the file 'outfailtest', execute 'inputbashangle' with them, then move on to the first two numbers of the second line for all the lines of 'outfailtest'.
in gcc how to read a blank line ie a string of length 0.my code:
Code:
#include<stdio.h>
#include<string.h>
[code]...
i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
[Code]....
How do i take a single line of input from the user in a shell script?
View 3 Replies View RelatedUnless your distro has taken care of it Centos 5.5, you'll need to create a user with a password and read/write privileges for program database. You can do this using the MySQL command line client if you are familiar with it. Well I am not familiar with it, so I wam wondering how to do it. As well when I run
mysql - p program </usr/share/program/mysql.sql>
It asks for a password. how do i find out this password.
I'm trying to create a separate thread for my program which basically polls using the read command. However this new thread seems to block the main thread, anyone know why this could happen.
In main I call this function pthread_create(&mainEventThread, NULL, GenericEventThread, NULL);
which calls
/*New threads start function */
void *GenericEventThread()
{
short int i, nError = -1;
[Code]...
I've used pthread_self to check that a new thread is being created, so why is the while loop in one thread blocking the main thread from running, I haven't used the join function anywhere in my code.
i'm a college student studying pc programing, and i was given today a special work and i have to program using miranda... which i've never used it >.< can anyone give me a hand to where to download, how to compile, and a simple tutorial for making a simple program or something?
View 3 Replies View RelatedTrying to create a small script that will read user's input, test if user entered some input and if not display some message or display a text using user's input.
The script is the following but i get an error saying "[: 6: =: argument expected"
I am trying to create a RS232 C program that executes a series of commands down the line to a robot. Everything seems to work fine, except any sequential write to the serial port. At first I thought it was the UART's buffer being filled too fast, but even with a 50 uS delay it still throws the error.
Here is my code:
Code:
#include <termios.h>
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/signal.h>
#include <sys/types.h>
[Code]...
I have downloaded the backtrack 4 r2 but when I started it, it didn't show me the line to enter the user name and the password
View 5 Replies View Relatedin c how to read multiple lines from user input
using scanf it is not possible and using gets we can able to read one line at a time
hoe to read multiple lines at a time from user input....
im trying to build a simple program for my C programming class, this is the source code
#include <stdio.h>
int main()
{
int length, width, length, height, area, perimeter;
perimeter = width + length + height;
area = width * length + heigth;
[Code]...
i dont see any error (you might)but every time i run it it runs but after it asks me to input for the width i do it but it doesn't take me to the length, it just stays blank until i input another value in the same place for the width, it asks me for 4 inputs in total i don;t know why, and after i run it different times it gives me different values for the perimeter and are. how can I fix this?
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI like running sql queries from the command line.
Code:
sqlite3 foo.db "select * from some table"
How can I specify
Code:
.mode column
at the command line?
How to create a simple Makefile using C....
View 3 Replies View RelatedI just learn perl script.May i know how to simplify the code below especially in the red color part? i saw some examples in internet, they use "next" command.
View 20 Replies View RelatedI need a qtimer to trigger reading of a file line by line, I have the code sort of running with the timer trigger but qtimer will just read the first line over and over as it is now.
Here is the code so far:
self.lcdtimer = QTimer()
self.connect(self.pushButton85,SIGNAL("clicked()"),self.update)
self.connect(self.lcdtimer, SIGNAL("timeout()"), self.lcdxyz)
Code:
def lcdxyz(self):
import time
import os
[code]....
Code:
#!/usr/bin/perl
use 5.10.0;
use strict;
use warnings;
use Net::Ping;
[code]....
I am new to writing shell scripts. So, please bare with me. I am currently trying to write a shell script which will read the directory path as input from user and will traverse the Dir tree to find all available audio and video files. I have tried to write as much as I could but I don't know where I am making mistake as I get some files to be audio file which are actully tar balls. On the second note there are some files which video but script shows them to be audio. And, some video files are completely skipped. I am giving the shell script below so that you can see. I am using two external files as source which I am attaching.
Code:
#!/bin/bash
#Let's load the extensions that we want to search for
vdExt=$(cat vdExtList)
adExt=$(cat adExtList)
[code]....
How can i write a simple c program in my RHEL5?I am more concerned about what are toosl i need to install to get a C platfrom running in my RHEL5?
View 14 Replies View RelatedI need to create a single line of output from multiple and variable lines of input in a Linux bash shell script.
My input file looks like this:
Where there may be any number of umsecondaryphonenumber lines; if there is not a umsecondaryphonenumber line for a telephonenumber, I don't want to write any output.
So, the output file should look like:
The script I have so far is:
My question is - how do print each of the elements of an array in one record - i.e. what do I put in place of howdoiprintarray?
I have created a simple download schedular with source-code give below :
---------------------record_strokes.sh-------------------
touch /home/student/packs/lynx/logfile
lynx -cmd_log /home/student/packs/lynx/logfile
[code]....
As I'm starting to learn bash scripting I'm trying to automatize some tasks I usually perform. I have a notification mail I need to send several times a day. It has this structure:
Quote:
Dear user,
blah blah blah blah
You need to contact the following people:
[code]...
To replace "user", I found this:
Code:
read -p "Please enter username: " username
echo "Dear $username,"
Which probe to be very useful with other simple notifications like this. But I don't know how to manage the email addresses as they are usually more than one and could vary from 1 to 10. They should appear one above the other. I found this: "Here is a little work around. The only thing the user needs to do is hit enter without anything else on a line and it will close out"
Code:
#!/usr/bin/ksh
word=a
until [[ $word = "" ]];do
[code]....
I tried to use it and modify for my needs but I failed, I don't realize yet how can I use it. If possible, I would like to use the until loop like the above example just for learning purposes but any other form will be accepted as well.
i'm trying to create simple form that will also upload only xml data. first, the user will need to upload an xml document only by clicking submit, the data will be posted to the server and the user will be redirected to uploader.php. This PHP file is going
to process the form data and do all the work.
PHP Code:
[code]....