Ubuntu :: Installing Nvidia - Started In Failsave Graphics Each Fresh Boot
Mar 16, 2011
Sometime back my Nvidia card blew up and I had to order a new one -problem was I had to run in Failsave graphics. If you have not change /etc/X11/xorg.conf and have not install any graphics drivers,
[Code]...
I started in Failsave graphics each fresh boot. New Nvidia card arrived today and installed but I cannot loaded the drivers. System/Admin/Additional Drivers tells me I have the Recommended Driver installed but when I go System/Admin/Nvidia Server Settings I'm informed You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. I open terminal as root and type nvidia-xconfig and I get:
[Code]...
View 4 Replies
ADVERTISEMENT
Mar 7, 2011
Running 10.10 and graphics card has just died. I have to start in recovery mode from grub screen and manually request failsafe graphics. For some reason Ubuntu will not Reconfigure my graphics set up, so everytime I switch on I have to go through the screens to run in failsafe mode. Can I do something so that Ubuntu will just boot in this mode? I will replace the card but it may take some time. My monior is currently plugged into the motherbord which is a ASROCK G31M - R2.0 which has Intel� Graphics Media Accelerator 3100 graphics.
View 4 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Jul 25, 2010
I have Nvidia 8400 GS graphics card. I am using Fedora 13 on AMD phenom processor. I want to install drivers for my graphics card on fedora 13.
View 4 Replies
View Related
Jan 14, 2010
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...
View 1 Replies
View Related
Dec 11, 2008
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
View 1 Replies
View Related
Oct 27, 2009
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
View 3 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jul 28, 2010
Re: nVidia latest Drivers - im trying to install a 9800gt nvidia graphics card on my ubuuntu i have been reading forums for the last 5 days and still no luck i managed to do a install and it is giving me the following errors distribution pre install script failed install failed /var/log/nvidia-installer.log unable to load kernal module 'nvidia,ko,
View 10 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Oct 11, 2010
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Dec 27, 2010
I'm running 10.10, I just recently installed a new graphics card, a Radeon HD4670, Ubuntu loads, and after it's finished loading, it goes to a black screen, and stops loading. I previously was using a nVidia 6200.
View 4 Replies
View Related
Aug 2, 2009
I installed fedora 11 yesterday, and didn't get time to do anything else. And the first thing I did today was to install the nVidia graphics drivers. But after I rebooted the loadings screen comes up (the one with 3 loading bars) and then it's just a black screen with a blinking _
View 4 Replies
View Related
Apr 1, 2010
I installed a new graphics card (Nvidia GeForce GT240 1 Gb, 128bit DDR3) on my gigabyte VA900M motherboard, with my computer running a dual boot of windows 7 (64 bit) and ubuntu 9.10 (64 bit). The computer would not boot past the memory test stage. To solve this, i flashed the BIOS with the latest upgrade for the motherboard from the Gigabyte website. This still did not work, so, doing the usual "testing hardware combinations by unplugging and replugging", I removed 1 Gb of RAM, which solved the problem of booting past memory test (a case of too much memory?)
Problem: The problem now is, GRUB wont boot from the HD, unless I have the Windows 7 disk (or Ubuntu Live) in the DVD drive. If i dont press a key to boot from the disk, Grub will then load. how to make GRUB boot from the HD? Do I need to redirect/reinstall GRUB? Im pretty sure it is not a BIOS problem.
View 2 Replies
View Related
Apr 4, 2010
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
View 7 Replies
View Related
Apr 26, 2009
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies
View Related
Apr 3, 2011
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 5 Replies
View Related
May 17, 2010
I have a HP dv6314tx laptop with Nvidia Geforce Go 7400 graphics card. Recently I installed 10.04. Without installing any nvidia drivers my boot screen resolution and desktop resolution were fine. But I cudn't activate Extra Visual effects and so I installed nvidia drivers. Now the problem is that Extra visual effects work just fine. But during the boot, the splash screen has a very poor resolution.
View 2 Replies
View Related
Aug 3, 2010
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Jul 21, 2010
I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).
View 6 Replies
View Related
Jan 3, 2011
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
View 9 Replies
View Related
May 6, 2011
coming back to Ubuntu after not liking v8, installed 10.10 and upgraded to 11.04 during install process. I have a nvidia GTX 250 running video to a monitor and a tv and wanted to use my green center channel analog out on the back to send audio to the tv. (no room for hdmi, had to use VGA).
I can't enable sound, I've Googled the crap out of this and have found my sound to be nVidia MCP51.
I'm not very Linux savvy, so if you need me to run commands please let me know what they are. Thank you for your assistance.
View 9 Replies
View Related
Mar 25, 2010
I installed 9.10 onto a flash drive with 1 gig of presistence. I tried to install Lyx but it started installing Tex Live on the flashdrive. So I stopped it and installed Tex Live on my own using the installer from its site onto the hard drive. However, some space on the flashdrive was used by the failed install. Anyway I can get that space back? Additionally, if I want to swap to a larger flashdrive in the future? Could I just install the same way onto a larger flashdrive, set a larger presistence, and copy over all files from my original flashdrive? Sorry if I'm butching terms, I'm pretty new at this.
edit: Erm...I think when I deleted the things in the tmp folder because had a lot of archive files in there...I might have deleted something important. Since it is also now asking me for an administrator password that I didn't set. Trash doesn't have anything in there any more.
View 4 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Apr 7, 2011
I've borrowed a copy of 11.4 DVD install disc from someone at work, everything went fine install wise. Except Grub taking control, which I didn't ask it to, but easy fix with yast, problem is firstly my graphics resolution is wrong, but I'm trying to work that one out myself as it always seems to be happening with distros I use on my machine. The weird thing is my desktop blinks! Every 10secs or so the whole screen goes blank and then reappears? I thought it might be the wrong refresh rate, but that's at 60Hz which is correct, would it be the resolution problem?
My hardware:-
P4 2.8
1Gb ram
Geforce FX 5500
Dell 1703FP monitor
I was trying to running diagnostic's from Opensuse, but the blinking was getting on my nerves and I'm not familiar with a non Debian based OS......yet! I've got compiz and all running on the hardware in my Ubuntu install after editing the xorg.conf, could I simply copy that to my Opensuse install?
View 8 Replies
View Related
Dec 14, 2010
I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use
startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx
View 2 Replies
View Related
Jan 22, 2010
I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
View 1 Replies
View Related
Dec 30, 2010
Just wondering how i could add a entry into a restore script i would run after doing a fresh install of #! Crunch bang. going to be using a base script from [URL]...to do the basics replacing the aptitude thing with apt-get of course What i will be using is as follows
#!/bin/bash
#
# This script is the first in a series of setup scripts for gnome
# Check for admin rights. If user is not an admin user, exit the script
if [ $UID != 0 ]
then
[Code]...
View 2 Replies
View Related
