Ubuntu :: Fresh 11.04 - No Sound NVidia MCP51?
May 6, 2011
coming back to Ubuntu after not liking v8, installed 10.10 and upgraded to 11.04 during install process. I have a nvidia GTX 250 running video to a monitor and a tv and wanted to use my green center channel analog out on the back to send audio to the tv. (no room for hdmi, had to use VGA).
I can't enable sound, I've Googled the crap out of this and have found my sound to be nVidia MCP51.
I'm not very Linux savvy, so if you need me to run commands please let me know what they are. Thank you for your assistance.
View 9 Replies
ADVERTISEMENT
Jan 14, 2010
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
View 1 Replies
View Related
Mar 16, 2011
Sometime back my Nvidia card blew up and I had to order a new one -problem was I had to run in Failsave graphics. If you have not change /etc/X11/xorg.conf and have not install any graphics drivers,
[Code]...
I started in Failsave graphics each fresh boot. New Nvidia card arrived today and installed but I cannot loaded the drivers. System/Admin/Additional Drivers tells me I have the Recommended Driver installed but when I go System/Admin/Nvidia Server Settings I'm informed You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. I open terminal as root and type nvidia-xconfig and I get:
[Code]...
View 4 Replies
View Related
Dec 30, 2010
Just wondering how i could add a entry into a restore script i would run after doing a fresh install of #! Crunch bang. going to be using a base script from [URL]...to do the basics replacing the aptitude thing with apt-get of course What i will be using is as follows
#!/bin/bash
#
# This script is the first in a series of setup scripts for gnome
# Check for admin rights. If user is not an admin user, exit the script
if [ $UID != 0 ]
then
[Code]...
View 2 Replies
View Related
May 8, 2010
I just installed the latest version, updated it and everything, but I can't get my sound to work. I have an onboard sound card, and a Soundblaster too.
Here are the lspci results:
Quote:
And the aplay -l results:
Quote:
I'd like to be able to get my Soundblaster to work, cause I plan on dual booting with WinXp, but if the only way is the onboard way, I'm cool with it.
View 5 Replies
View Related
Jun 23, 2010
I tried Intrepid on this computer a few years back, and remember sweating over my computer for days trying to get the sound to work, before eventually giving up and going back to Windows. Now I figured I'd give it a second go. 100% fresh install, Lucid Lynx. I was hoping maybe the new version would have fixed whatever I was having trouble with before. No such luck. Have checked that nothing is muted, in the tray icon and in alsamixer and in a bunch of others. Have made sure that I'm in all the proper groups.
"aplay -l" gives me:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
View 5 Replies
View Related
Apr 2, 2011
'm trying to set up at least 5.1 sound in my fresh ubuntu 10.10. I have stereo sound but failed when trying to set up the rest. I've googled it, read through couple of pages and tried the following:
- I've installed alsa 1.0.24
- I've added the following lines to /etc/pulse/daemon.conf
Code:
default-sample-channels = 6
default-channel-map = front-left,front-right,rear-left,rear-right,center,lfe
- I've added
Code:
options snd-hda-intel model=3stack-digout
to /etc/modprobe.d/alsa-base.conf
There is no 'Profile' button/menu in Sounds preferences/Hardware.
Code:
$speaker-test -Dplug:surround51 -c6
speaker-test 1.0.24.2
Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
[code].....
View 8 Replies
View Related
Jun 29, 2011
My sound was working fine when I was trying out Ubuntu on a partition, I was so chuffed with it I did a fresh install. I have no sound. VLC, Amarok, Clementine, Audacity, Audacious, every audio player in the Ubuntu Universe doesn't play sound. Obviously it's something 'hardware' or 'driver' connected because it all worked perfectly when I still had Windows as the 'host' partition. I'm not going back to Windows I'll try out OpenSuse or something to see if the sound thing happens on that.
View 2 Replies
View Related
Sep 1, 2011
I'm experiencing no sound problem in F15 fresh installation. I've installed autoten codecs. Video of many formats (avi, flv, mp4) works, but there is no sound inside and mp3/ogg files do not sound as well.
Could you please give me some feedback. I'm using Creative external sound card since I guess my internal sound card is broken. I have two systems on my quite old computer (Windows XP and F15). In Windows the internal audio card does not work while Creative one gives me a sound and I can create/edit music. Besides in F15 neither internal nor external cards do not work.
[Code]...
Then the problem is the following in F15. When I play AVI video, it goes in step with the sound while FLV or MP4 videos produce good quality sound, but do not go in step with it giving very slow response and therefore omitting big parts of video (series of snapshots) and jumping from one snapshot to another.
View 1 Replies
View Related
Mar 13, 2011
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
View 7 Replies
View Related
Feb 17, 2010
I just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
View 3 Replies
View Related
Dec 25, 2010
I just installed lubuntu 10.04 on an old machine and cant get the sound to work. I have been through the sticky but cant seem to see the problem. Heres the useful output:
[Code]...
View 1 Replies
View Related
Sep 21, 2010
I did was install MInt 9 on it. Everything is going well except no sound at all. Not even the 'start up chime' of any music/videos. I have the volume buttons working on the laptop and I have checked sound preferences and nothing is muted. I did not dig much further as I have learned with mint and ubuntu that can create problems. This is a fresh install and no sound from the get go. How should I proceed to trouble shoot?
[code]....
View 2 Replies
View Related
Dec 26, 2009
I dont ve any sound in my F12 fresh install. i ve updated it but i didnt check if the sound was workin earlier. My laptop is compaq presario Cq60.
I disabled pulse audio from startup and create the client.conf file in .pulse folder with the following code:
Code:
View 14 Replies
View Related
Jun 22, 2010
I have a new machine where I setup fedora 13. When I run any multimedia program I have no sound. I have the image in any video player but not the sound. I went to Preference > Hardware > sound, dir a right and left speakers test, I can hear the sound.
View 3 Replies
View Related
May 8, 2011
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
View 5 Replies
View Related
Sep 15, 2010
I've never had any problems before,but I just did a fresh install of 10.04.1 on a brand new drive yesterday. I noticed this morning that I have no sound drivers(under the hardware tab of sound preferences, there is nothing listed). I found a thread that had this line to run:
Code:
cat /proc/asound/card0/codec#* | grep Codec
And I got:
Code:
Codec: Realtek ALC888
Not sure what to do now though.
View 1 Replies
View Related
Dec 15, 2010
I will tell you this: The hard ware is a MSI mother board [AMD flavored] [exact numbers, not known at the moment, but can be recovered]. The audio is built into the mother board. It worked fine with Ubuntu 10.04 I read a few posts here and there, and ran a hardware diagnostic. It came back and said no sound card was installed.
View 3 Replies
View Related
Nov 18, 2010
After successfully installing Debian 5.0 stable from a CD, I noticed that there wasn't any sound. I unmuted the volume in Debian itself and there still wasn't any sound! I ran alsaconf and it came up as a VIA VT8233/A/8 sound card.
View 3 Replies
View Related
Sep 11, 2010
Following some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.
However, I can hear the test sound form Configure Desktop / Multimedia
Any clue about what is going on?
View 8 Replies
View Related
Aug 12, 2010
I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...
[code]....
View 9 Replies
View Related
Mar 10, 2011
Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:
[Code]....
View 9 Replies
View Related
Mar 14, 2011
After spending a full day messing with my dual monitors displays-should-not-be-cloned-by-default, I have now come to the sound. The config looks like the 11.3 setup (I alternate partitions from one install to the next), but all I get is silence. KMix won't run. Amrok is silent. "Sound Configuration" gets me to a window showing two cards I know nothing about. I've got an nVIDIA chip on the mother board and the two cards listed are "M2N72-D w/ snd-hda-intel" and "Creative Tech, Ltd. w/ snd-usb-audio". I'd have gone back to 11.3 where this stuff works, but my configuration files were all auto-updated and don't really work any more. I guess I ought to have archived the config files, but I didn't and I'm here now.
lspci shows:
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
and some /var/log/messages entries:
Code:
Mar 14 14:18:22 beethoven kernel: [ 1120.311164] usbcore: deregistering interface driver snd-usb-audio
Mar 14 14:18:22 beethoven pulseaudio[21051]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:22 beethoven pulseaudio[21102]: pid.c: Daemon already running.
Mar 14 14:18:22 beethoven kernel: [ 1120.800722] usbcore: registered new interface driver snd-usb-audio
Mar 14 14:18:38 beethoven pulseaudio[26008]: pid.c: Daemon already running.
Mar 14 14:18:39 beethoven pulseaudio[30854]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:40 beethoven pulseaudio[30904]: pid.c: Daemon already running.
Mar 14 14:19:40 beethoven pulseaudio[30854]: ratelimit.c: 7 events suppressed
Mar 14 14:21:39 beethoven pulseaudio[30854]: ratelimit.c: 44 events suppressed
Mar 14 14:35:11 beethoven pulseaudio[30854]: ratelimit.c: 176 events suppressed
Mar 14 14:46:35 beethoven pulseaudio[30854]: ratelimit.c: 38 events suppressed
with duplicate events suppressed with ellipses by hand.
View 7 Replies
View Related
Feb 13, 2011
I just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main
[URL]
Sound Card (1st one / second is built in audio on a video card)
joe@Tux-Box:~$ lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer
Cannot open mixer: No such file or directory
When I try to open sound applet in pannel ->
No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards
--- no soundcards ---
- The user is part of the audio group.
- I was playing around with run levels and if I
ctl -alt F2
log in as user
su -
password
init 5
hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel.
id:5:initdefault:
# was 2 above at install - sound came on at 5
View 2 Replies
View Related
May 5, 2010
I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....
View 9 Replies
View Related
Nov 16, 2014
I have an HDMI connected monitor with speakers but I don't get any sound after a fresh install. My computer ain't nothing fancy, my specifications can be found in my current board signature.
I have zero experience configuring devices on Linux. It's rather depressing not being able to listen to music.
View 5 Replies
View Related
Mar 27, 2009
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
View 4 Replies
View Related
Oct 21, 2010
A fresh install of 11.3 64 KDE 4.4 some packman stuff installed. Some broken as no current 64 bit libs or funky packman situation currently. CD audio is choppy. No mp3 playback though support is installed. [URL]....
[Code]...
View 3 Replies
View Related
Jan 4, 2010
I am having trouble getting sound over hdmi with my Nvidia MCP7A HDMI. The strange thing is that everything works fine in a Live disc, but once I do a fresh install of that Live disc I get no sound, even though my configuration is exactly the same (as far as I can tell). I've checked the little things like alsamixer volumes, aplay -l, etc etc. Everything looks good to me. I can reproduce on multiple TVs so its not the receiver. Video drivers are the same in both live version and installed. aplay -l detects my device. sound/pci/hda/patch_nvhdmi.c already has my correct vendor id in it. Perhaps the following info can figure out what my installed environment is lacking.
Live Disc Info
Hardware
View 2 Replies
View Related
Jan 26, 2010
I recently installed ubuntu 9.10, today actually, and I can't seem to make the audio work. I read a lot of threads, but no luck with this..
View 7 Replies
View Related
