I installed g++ using package manager and support libraries using sudo apt-get install build-essential cmd, but I'm not able to compile a socket code. It gives me the following error:
server.cpp:1:26: error: ServerSocket.h: No such file or directory
server.cpp:2:29: error: SocketException.h: No such file or directory
We are facing broken pipe exception while connecting to SMPP gateway through TCP/IP.on RHEL4 It is coming till we restart the application. Below is the exception we are getting. java.net.SocketException: Broken pipe
View 1 Replies View RelatedI am trying to install minisip on ubuntu-9 server ,but when I run configure error occurs ,as shown by the config.log,
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
[code]....
while upgrading to Lucid, I got the following error:
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/dbus_1.2.16-2ubuntu4_i386.deb (--unpack):
unable to open '/lib/dbus-1.0/dbus-daemon-launch-helper.dpkg-new': No such file or directory I tried to just add the dpkg-new extension to the existing /lib/dbus-1.0/dbus-daemon-launch-helper - to no avail. How can I finish installing dbus?
Hi,
Can you help me to install OpenCS PKCS on Ubuntu 10.10 with Firefox 3.6.
I have smard card reader Gemplus
Here is error:
HTML Code:
dejansoftware@ubuntu:~$ pkcs11-tool --show-info
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
[code]....
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
Attempt to upgrade 10.10 to 11.04 server installation (more or less plain vanilla) gives:
[Code]...
Tried reinstalling the obvious packages related to this, no change. Aptitude updates to 10.10 function without problems.
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
I get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
I'm trying to install Qt in my ubuntu 10.04 and I received the following error. qvfbshmem.cpp:42:22: error: asm/page.h: No such file or directory
View 6 Replies View RelatedI am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
my squid show like this when i try create swap directory
[Code]....
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies View RelatedI'm trying to setup a keyboard-command to open my downloads folder. Simple enough. To get things started off I did $ gnome-open /home/user (my name where user is) and it opens my user home directory. But when I get to adding downloads to the end of it it gives me this $ gnome-open /home/user/downloads Error showing url: Error stating file '/home/User/downloads': No such file or directory As far as I can tell there is most obviously a downloads directory in my user folder. I also get this error when trying to open any other home folder, like music, or pictures.
View 3 Replies View RelatedI created a USB Live disk and installed Fedora 12 to my Asus EEE 1005HA (12 inch screen). The machine boots fine, but Hardware Graphics acceleration is not working correctly. If I stop X11, and type "Xorg -configure", the Xorg utility recieves a segmentation fault and exits, and the resulting xorg.conf file does not work correctly. The error is "(EE) open /dev/fb0: No such file or directory". All the correct packages are installed, and there is no logical reason why it is failing. The rest of the hardware on the EEE works fine.
View 2 Replies View RelatedI'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
My ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
I use Codeblocks as IDE environment for my C programs. I recently added the matrix library Meschach, but unfortunately the headers are not found during compiling/linking process.For instance, my generic program is the one below:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <matrix.h>
[code]...
This program generates the following error during compilation:
Quote:
main.c|3|error: matrix.h: No such file or directory|
And the declaration <matrix.h> is supposed to include the Meschach library, according to the instruction on the below link:
[URL]
Furthermore, I see on folder /usr/include the following:File stdio.h;
Filestdlib.h;
Folder "Meschach", which contains the file "matrix.h".
rcon@li121-251:~/b3$ ./b3_run.py
: No such file or directory
rcon@li121-251:~/b3$ l;
[Code].....
as you can see up top it gives me an error when i try to run the file. it is a Ubuntu error and i don't what the heck is causing it. had it before but don't remember how i resolved it.
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies View RelatedAn executable fails to be found and run when called even though it is found and displayed by ls.I am on lucid LTS fully updated 32 bit.The file has permissions setup but any attempt to run it results in the error bash ./executablename No such file or directory
This situation also seems to be present in kcronsometimes my scripts dont run from it even thoughthe run now option does.This bug has been around since dapper it would be nice if someone could fix it.
gcc kk.c : kk.c:1: fatal error: gtk/gtk.h: No such file or directory compilation terminated.
View 1 Replies View RelatedIf I type su, it gives me following error su: No such file or directory
View 5 Replies View RelatedI have peculiar issue..as follows We have a nsf mount file system mounted across 5 servers and keeping RMAN backups on that. Most of the days backups going through without any issue. But occasionally (monthly 3-4 time) it fails with the following error. But if we re-run the backup it goes through without any issue. There is no space issue at all. Almost 200 GB is free always is anyone experienced same error? How to solve it?
'ORA-19502: write error on file
ORA-27072: File I/O error
Linux-x86_64 Error: 2: No such file or directory
I copied g95 executable under /usr/bin which is clearly in my PATH. When I type g95, it says "bash: /home/username/bin/g95: No such file or directory". Why doesn't it look for somewhere else that is in my PATH?
View 5 Replies View Relatedthere are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies View Related