General :: NVIDIA Installation Encountered Error "conflicts With File From Package XFree86-server-4.3.0.1-21"
Apr 28, 2010
I'm installing a NVIDIA driver and encountered some error message. Please see below the sequence (I've set runlevel to init 3);
linux:~/SuSe # rpm -ivh NVIDIA_GLX-1.0-4191.suse81:i586.rpm Preparing... ############################ [100%])file /usr/X11R6/lib/modules/drivers/nvidia-drv.o from install of NVIDIA_GLX-1.0-4191 conflicts with file from package XFree86-server-4.3.0.1-21
It seems to me that I've got a dual package somewhere.
Quote:
Transaction Check Error: file /usr/lib/libakonadi-kabc.so.4 from install of kdepimlibs-4.2.0-1.fc10.i386 conflicts with file from package kdepim-libs-6:4.1.4-1.fc10.i386 file /usr/share/config/plasmoids.knsrc from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386 file /usr/share/kde4/servicetypes/plasma-animator.desktop from install of kdelibs-6:4.2.0-10.fc10.i386 conflicts with file from package kdebase-workspace-4.1.4-1.fc10.i386
I have inherited our Linux packaging and as the number of versions increase, the number of conflicts is starting to get a bit unmanageable. I believe the easiest way would have been to keep the package names the same and just change the release in the spec file but unfortunately I am past that as a lot of these packages are rolled out to our estate. (I am told there were reasons for not keeping the package name the same and incrementing the version/release)
Is it possible to wildcard conflicts so I don't need to keep adding as new versions are created. For example, instead of using all the conflicts below, have something along the lines of AAtest45* <= 1.4 & BBtest45* <= 1.4 Meaning that all I would need to do was change this to 1.5 at the next release (the packages below version matched the release in the spec file)
I just finished installing a dual boot XP/Ubuntu 10.04 LTS for desktop about half an hour ago, and it's my first experience with a Linux OS. Now that my *complete idiot noob* flag is flying, I have an error I think I need to report:An error occurs with the Package Manager, I get this message when I try to run it, and when Ubuntu boots:
E: Encountered a Package with no Package: header E: Problem with MergeList /var/lib/apt/lists/ us.archive.ubuntu.com_ubuntu_dists_lucid_restricte d_binary-i386_Packages E: The package lists or status file could not be parsed or opened.
This usually means that your installed packages have unmet dependencies I tried to download and install Chrome, and it came up with a similar error.
Is my install corrupt/incomplete or something? My setup is a P4 2.4Ghz, 512Mb RAM, onboard graphics, wireless internet and the HDD is 40GB, split into 2 partitions, and my Ubuntu Partition is 10 GB. I'm running Ubuntu 10.04 LTS distribution, and the other OS is Windows XP Professional SP3.I installed Ubuntu by using the Wubi installer.
I run into this error while trying to install wireshark. I am sure there is a quick fix. I can see the files are different I just don't know how to resolve the error.
Test Transaction Errors: file /usr/lib/python2.6/site-packages/wireshark_be.pyc from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686 file /usr/lib/python2.6/site-packages/wireshark_be.pyo from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686 file /usr/lib/python2.6/site-packages/wireshark_gen.pyc from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686 file /usr/lib/python2.6/site-packages/wireshark_gen.pyo from install of wireshark-1.2.6-2.fc12.x86_64 conflicts with file from package wireshark-1.2.6-2.fc12.i686
I am a Debian User, now I have decided to install Fedora 14 x86_64 on my Acer Aspire computer, mainly to develop C++/Java software. Due to this, I have installed a lot of development packages. Shortly after installation, I have encountered problems updating some packages.
Below 'yum update' output: file /usr/lib64/ghc-6.12.3/bin-package-db-0.0.0.0/libHSbin-package-db-0.0.0.0.a from install of ghc-ghc-devel-6.12.3-8.3.fc14.x86_64 conflicts with file from package ghc-6.12.3-5.fc14.x86_64
file /usr/lib64/ghc-6.12.3/ghc-binary-0.5.0.2/libHSghc-binary-0.5.0.2.a from install of ghc-ghc-devel-6.12.3-8.3.fc14.x86_64 conflicts with file from package ghc-6.12.3-5.fc14.x86_64
file /usr/lib64/qt4/plugins/designer/libqwebview.so from install of qt-webkit-1:4.7.2-8.fc14.x86_64 conflicts with file from package qt-x11-1:4.7.0-3.fc14.x86_64
file /usr/lib64/libusrp.so.0.0.0 from install of usrp-3.2.2-9.fc14.x86_64 conflicts with file from package gnuradio-3.2.2-7.fc14.x86_64
REPOs ENABLED: Fedora 14 -x86_64, Fedora 14 - x86_64 - Updates only. Can't be a problem of multiple repos.
Code: Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_natty-updates_universe_i18n_Translation-en E: The package lists or status file could not be parsed or opened. Get this kind of error while trying to update Natty.
I have an error message that I do not understand nor know how to resolve:
E: encountered a section with no Package:header E: Problem with MergeList/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_natty_partner_b inary-i386_Packages E: The package lists or status file could not be parsed or opened. E: _cache>open() failed, please report.
I hope this is simple for some of you!!! I do not have a clue what this means, I'm pathetic.
there are several posts related to my problem but not quite what I want. I don't need any effects to be running nor do I need perfect resolution. I have a PCI-E card Nvidia 8600 gts and I need to run redhat 7.1 for reasons that are not debatable. I also have an onboard ati radeon X 1250 but currently I am running the PCI-E.The installation was successful and ran in GUI, however after installation and reboot, the screen keeps flickering trying to load the desktop.I just need to get the GUI running the same way the installer was able to run in GUI, I tried editing the XF86Config file to change the driver to either vesa or vga but still didn't work. Probing for devices is not an option since the card is not listed and the maximum video ram goes up to 64MB in xconfigurator. It probes my card as a VGA generic with 1 MB ram. I know there is a way to have the desktop load just the same as the installer's gui settings but that's where I need help.
this is after changing all the 'driver' values to vesa. I don't understand why it can't find the screen even though I used the horizontal and vert. sync values for my monitor. Any instructions or advice on how to just get the desktop loaded would be great, I know this is a very old OS but regardless I need for it to work.
Total size: 821 k Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test Finished Transaction Test
Transaction Check Error: file /usr/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686 file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-17.fc12.i686
And I see that if I uninstall the dhclient package, I will lose my networkmanager, which I also need, is there a way to have a dhcp server as well as dhclient utility on fedora as it is possible on rhel?
I have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
I issued "yum update" and the process ended with a transaction check error(see below). Running rpm_check_debug Running Transaction Test Finished Transaction Test
Transaction Check Error: file /usr/share/backgrounds/images/default-5_4.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-41.el5.centos.noarch file /usr/share/backgrounds/images/default-dual-wide.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-4 [code]...
I installed Oracle Database on this server few months ago. I see in /etc/yum.repos.d directory a public-yum-el5.repo file with entries pointing to Oracle which must have come from that installation. Now how do I proceed from here?
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
When I first got Ubuntu a few weeks ago, and got the older version of Wine from the Software Center, and it could run pretty much any game I wanted. Albeit really slowly. Well, I upgraded to 1.2 using the instructions on the wine website, and now a couple of my low-power games (like Bootfighter Windom XP) run totally perfectly, but a lot of mainstream games like Mirror's Edge and Mass Effect 2 just crash when I attempt to open them, and all they all have the same message where the main .exe file has "encountered a serious error." Here's what the terminal gives me:
Code: Backtrace: =>0 0x68286bbe in libc.so.6 (+0x110bbe) (0x033bd9c0) 1 0x693815a1 in winhttp (+0x115a0) (0x033bea20) 2 0x69381aa1 WinHttpQueryDataAvailable+0x60() in winhttp (0x033bea70) 0x68286bbe: fmull 0x488bdc4a(%ecx) .....
I think I had this problem before but I don't remember what was done to correct it. I just tried to do an update and got this error message.
Code: Test Transaction Errors: file /usr/lib/gstreamer-0.10/libgstfbdevsink.so from install of gstreamer-plugins-bad-free-extras-0.10.18-1.fc12.i686 conflicts with file from package gstreamer-plugins-bad-0.10.17-2.fc12.i686 file /usr/lib/gstreamer-0.10/libgstoss4audio.so from install of gstreamer-plugins-bad-free-extras-0.10.18-1.fc12.i686 conflicts with file from package gstreamer-plugins-bad-0.10.17-2.fc12.i686 file /usr/lib/gstreamer-0.10/libgstsdl.so from install of gstreamer-plugins-bad-free-extras-0.10.18-1.fc12.i686 conflicts with file from package gstreamer-plugins-bad-0.10.17-2.fc12.i686 file /usr/lib/gstreamer-0.10/libgstshapewipe.so from install of gstreamer-plugins-good-0.10.21-1.fc12.i686 conflicts with file from package gstreamer-plugins-bad-0.10.17-2.fc12.i686 file /usr/bin/gst-camera from install of gstreamer-plugins-bad-free-0.10.18-1.fc12.i686 conflicts with file from package gstreamer-plugins-bad-0.10.17-2.fc12.i686 file /usr/bin/gst-camera-perf from install of gstreamer-plugins-bad-f...
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf # # Configuration file for ISC dhcpd (see 'man dhcpd.conf')
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
I tried to install 64bit 10.04 Release Candidate but it fails every time. I have been using 64bit 9.10 Karmic on this computer so it's suitable for installation.
I tried to install from USB stick and from CD but same error at the same point! It fails just befere it starts to ask your locations etc...
There must be something totally wrong on installer. Checksums are ok etc...
Errors seen with CD and USB stick installation: Pop up: "Istalltion failed The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again."
On command line I can see following error message on CD:
I am trying to install 10.04 32bit onto a new 1.5TB harddrive. I had previously installed 10.04 64bit on an old drive in the same nmachine. I partitioned and formatted the new drive using the old system. I have a couple of windows partitions and restored Win2K images to them, 4 formated Ext3 partions for whever flavour of Linux appeals to me a swap and two huge NTFS Data (home) and work areas. I installed Grub on the new drive, it also has its own partition for boot config files. The old drive has now gone.
Grub2 boots OK and gives me option for all the OS's even the one that are gone, thats OK I can fix that later with grub-update. Win2K boots fine and I see my NTFS partitions.
Now I boot from the Live i386 CD and chosse to install Ubuntu. The only thing that not allowed to default is where to install. Specify partition manually, Choose a spare 20GB Ext3 and the swap is already there too. I let it reformat to Ext3 and mount as /. (In Advanced I let the install boot loader default to ticked on /dev/sda )
The install goes OK until I hit the pop-up "Installation Failed". The installed encountered an unrecoverable error. A desktop session will be run etc etc..
I have tried this at least 10 times no. I downloaded and cut a new CD even though the old one worked fine on another box. Tried unticking the boot loader. Disable the floppy, removed the floppy.
I am relatively new to Ubuntu. Where do I look for the cause of the problem? I'll cut and paste the install log files in a moment.
I'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows: ACER TRAVELMATE 290 256 RAM (240 usable) Intel Pentium M processor 1500 MHz 599 MHz Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller Sound card: Realtek AC97 Audio
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
Everytime I try to install, or unistall anything, I get an error: Errors were encountered while processing: man-db There are a few different ones, but they all have that.
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details. "sudo apt-get dist-upgrade". I will always get an error pop-up and a error message in terminal saying "errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" & "E:sub-process /usr/bin/dpkg returned an error code (1)" And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
