Ubuntu Installation :: Upgrade From 9.x To 10.04, Now Fails To Load Windows 7?
May 19, 2010
I previously had Ubuntu 9.x and Windows 7 installed at my laptop after I decided to upgrade Ubuntu to 10.04.
After the upgrade finished, now at the boot selection menu I am able to select Windows 7, but after it starts it tries to fix some errors and says that it's unable to load. Ubuntu 10.04 loads just fine.
I currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code: GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
I had a 10.04 Wubi install on my Win7 notebook. I selected the option to upgrade to 10.10 from update manager. It downloaded all the updates, but reported that due to some problem, only a partial upgrade will be possible. I agreed. And now, when I select Ubuntu from the startup OS list, it just shows a blank screen and restarts within 3-5 seconds. What do I do??
I am dual booting windows 7 and Ubuntu, and since the upgrade from 9.10 to 10.04 Windows 7 won't load.I tried the solution posted in another thread with a similar problem but to no avail.[URL]
After an almost flawless upgrade from 9.04 to 9.10, the desktop doesn't quite finish loading: when I log in I am left with unmovable but otherwise usable windows chiefly noticeable by their lack of title bar. I can kick the system into completing a normal startup by right clicking on the desktop and selecting "visual effects/normal" whereupon it pops up with "desktop effects not available" and subsequently the title bars all return and everything works as normal - even compositing (meta city). Something appears to be choking it at the last hurdle. How I might go about debugging it. Failing that, what do I need to purge/reinstall to make it work normally?
I'm new to the ubuntu forums as well as ubuntu. I'm excited to learn more about linux itself as well as ubuntu. I got ubuntu 10.04 running on my toshiba L505D laptop by disabling acpi in the boot commands. My first question is how do i do this permanently, is this bad, and would updating fix the issue? If so how would I go about updating.
Secondly, when the external hard drive I installed ubuntu on is not plugged in to the laptop, GRUB rescue comes up. I kind of like this because it provides a level of hardware security. I would however like to know how to load my windows partition encase the external hard drive fails.
I have a Onetouch 4 mini 160GB I bought a year ago. I t used to work fine but all of a sudden it started to become a problem device. My home pc has two operating systems on it: Windows 7 and ubuntu 10.04 lucid. the drive often fails to load on both systems. Sometimes it's recognized, but the reads are very slow and opening a folder on the drive takes around 120 seconds. Itried reformatting the whole drive, chicking it with chkdsk but it didn't help. Now I have around 70 GB of data on the drive. On my office pc I don't have such a problem and the drive works fine.
My home pc has an Asus P5B motherboard and intel core 2 duo cpu. I tried unplugging other usb devices, plugging in the extra power cord (data + data/power) and it didn't help. The drive also makes beeping sounds when I try to browes the files on it. I'm sure thid is not OS related as both Windows and Linux have the same issue. This is the output of dmesg | tail command on linux. You can see the os keeeps "resetting" the drive:
I'm trying to install ubuntu on a laptop (Acer Aspire 6530), and duel boot with windows vista. However, when starting up the computer with the CD in the drive, the installer fails to load, showing only a picture at the bottom of the screen showing a square and a circle with a person in it... This persists for as long as I have cared to wait (hours) and pressing keys at first results in nothing, then after sufficient key presses just produces beeps...
I had a dual boot Kubuntu 9.04 - FC 11 and decided to upgrade to Kubuntu 9.10. Recalling that I had issues with my ATI card drivers when I installed Kubuntu8.10 on my laptop, I decided to install the latest ATI Catalyst drivers. After the installation was complete I received a message warning me that if the X server fails to load I should run "aticonfig --initial -f". Indeed the X Server didn't load (after I logged in the screen flushed and went black). So I reinstalled Kubuntu 8.10 from a CD I without formating the respective partition. But the problem perists, X server fails to load. Even worse my menu.lst file has been changed and I can't boot FC11.
I am a long time ubuntu user (4.10) and have had a fair bit of experience installing ubuntu and the many mishaps along the way.
So after having no internet for a year I decide to try the new 10.04 flavour by ordering the cd from the site.
Installation went well, no hiccups. But when I restarted the comp it went straight to Xp, so I thought I'll just use the SGD to boot the partion anyway and fix this small problem later.
After SGD confused sda with sdb, I figured out that GRUB2 is now the standard boot loader.
So thats where I am lost, I have searched the forums quickly (25 pages or so..) and realise that I am not going to fix this easily or by trial and error.
I recently installed the 32bit version of 10.10 on my Dell Latitude E6510. Everything went smoothly.. in fact I was quite impressed as I have my laptop in a docking station connected to dual 24" displays. The installer recognized them and they worked perfectly right outta the box: yea for Ubuntu !
After the install, I installed some apps then upgraded the installation to the latest hotness - lots and lots of things were upgraded. I restarted the machine to "complete the upgrade process" and it boots but right when it gets to starting the Windows environment, both display just loose their signal...
It boots fine to the command line if I boot in safe mode. I had installed the nVidia drivers but I did that before the update and I had no problems until I did the system update. Any ideas? Should I start by disabling the 3rd party drivers? If so, how would I do that?
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
I was trying to install fedora 10 onto my new computer, with the full dvd. my new computer has 2G ram, Radeon 4670 and a Gigabyte motherboard. after i started up the installation, while it saying "loading anacoda...." the line" X window fail to load. Back to text mode." So should i continue with the installation? because i fear that after i installed the fedora 10 onto my computer, i have to use it in text mode
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
I am trying to clean install Jessie 8.3.0 onto an old PC, where I already have wheezy 7.7 working. I am using the 3 DVD- i386, which passed the integrity check.
Installation goes on smoothly till completing the "Select and Install SW" stage from 1st and 2nd DVD. At this point I get the warning that "Installation step failed, ..", giving the choice to repeat.
When repeated, the process gets completed (without asking for 2nd DVD), the new installation boots normally, but the KDE desktop opens irregularly, with some basic applications missing, and some flaws during certain operations.
The APT does not show any missing/broken link. I tried and repeat the installation with different choices as for kernels and/or desktops, but got the same result. I cannot guess where the problem originates, nor whether it is a known bug of the installer.
I downloaded the Fedora Live USB creator and the program consistently fails to load properly onto the flash drive. I have also downloaded the DVD iso program from this site and get only errors when trying to boot with an ISO burner? I am attempting to load the program on Sun Virtual Box, which is like VMare's Workstation, and the prompt consistently reads error when attempting to install. Also the progress bar on the Live USB loader never stops even after it the cmd prompt says it is complete.
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition dev/sda2 Windows NTFS dev/sda3 Windows FAT
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
In trying to upgrade from 10.04 to 10.10, the installation fails when checking software channels. The error basically says that there are breaks, broken depends and unmet dependencies. Yet Package Manager shows that there are no broken packages and mostly everything is running OK except for the Suspend option which doesn't work in 10.04 on a good number of various laptops. I am using an IBM Thinkpad R51 laptop with 1.5 GHz and 512 MB RAM. I have never had a problem like this with any Ubuntu upgrade in the past. How can I get past this problem and upgrade to 10.10? Log files available upon request. If log files needed, Someone on Launchpad said it's because I have third party software installed. But, this never happened before with previous Ubuntu upgrades.
I tried to upgrade Mythbuntu from 10.10 to 11.04 but it fails to download three packages, stopping the upgrade from finishing. The APT source is au.archive.ubuntu.com
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
It seemed to upgrade the first round and looks like it booted back into Ubuntu (I had Purple background) and asked for updates and I installed them and on reboot I lose video when entering desktop. I see the initial purple Ubuntu loading screen, but when it goes away I lose video completely and my monitor says it's unplugged.
I tried the grub nomodeset without luck. I am at the desktop in safe mode. If someone can tell me how to edit a file to enable the graphics again, I'd be forever grateful. Sorry if this was answered, but search only gave me help with the Intel 850 graphics problems and not what I was seeking.
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
The Update Manager has tried to upgrade me to version 11 three times now, and fails each time.
First I get a warning, that probably isn't important: "Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager."
After the upgrade I get this:
"Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a).
Upgrade complete The upgrade has completed but there were errors during the upgrade process."
The console has about six messages similar to this, all complaining about the vnc-e package:
"warning, in file '/var/lib/dpkg/available' near line 10992 package 'vnc-e': error in Version string '4.4.3_r16583': invalid character in version number"
I am trying to upgrade from Ubuntu 10.10 to 11.04.
When it gets to the end of the upgrade I get a dialog with the following error:
Quote:
Could not install the upgrades the upgrade has aborted. your system could be in an unusable state. A recovery will run now (dpkg __configure -a). code...
I just upgraded to ubuntu 11.04 but now all the kernels fail to boot. The resolution of grub changed and the older kernels are put into a 'previous kernels' folder. The most recent kernel halts at the message '* Stopping userspace bootsplash [ OK ]' and the previous kernels fail with the message 'Unlink after no-irq. Controller is probably using the wrong IRQ',
or show the background of the login screen with just a white box.
I think the cause is that I have an ATI graphics card (HD Radeon 3650), because on my 2 other computers ubuntu upgrades fine and they have NVIDEA graphics cards.
As a last resort I tried installing different distro's like Linux Mint but it also gived me the 'unlink after no-irq' message.
I had installed Ubuntu 10.04 within Windows 7nd everything work perfect until this morning. When I turned my laptop on I was told that Grub could'nt find the storage device and was presented with a grub command line
I have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
