Ubuntu Installation :: Load The Same Modules In The Upgraded 9.04 As Are Loaded By The Live CD?
May 5, 2010
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
View 1 Replies
ADVERTISEMENT
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
View 9 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
Oct 23, 2010
I'm trying to prevent a few modules from loading at boot, like i.e. bluetooth, sco, bnep, btusb, usb_storage and uvcvideo, so I blacklisted them in /etc/modprobe.d/blacklist.conf but they still get loaded. I've checked that I unload all of the ones depending on eachother so that shouldn't be the problem, I think. Does anyone know what I'm supposed to do to really prevent them from loading?
View 2 Replies
View Related
Sep 17, 2010
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
View 1 Replies
View Related
Sep 25, 2010
Howto check from the command line which modules were loaded after Lenny restart?
View 2 Replies
View Related
Nov 28, 2010
I recently updated the kernel from SLES 11 to SLES 11 SP1 .However my kernel modules are not getting loaded and they throw an error such as shown below:"Errornserting mii : Unknown symbol in module, or unknown parameter (see dmesg)"
View 8 Replies
View Related
May 23, 2011
I would like to download an already upgraded Ubuntu Live-CD or upgraded alternate CD iso-image. Like an Ubuntu Hardy with all the package and safety upgrades up till now so that I don't need to upgrade with a network connection.Particularly the last two LTSs:
Hardy Heron and a Lucid Lynx
View 9 Replies
View Related
Apr 14, 2010
I recently upgraded to ubuntu 10.04 from 9.10. I now have grub 1.98 and my problem is that when i select windows xp from grub it just goes to a black screen with a white flashing line. If i boot ubuntu it does the same thing for about five seconds then ubuntu loads right up. I hit e on windows xp in grub and this is what came up.
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs--uuid --set 7a841c73841c33db
drivemap -s _hd0) ${root}
chainloader +1
I then hit c on windows xp and entered each line on its own and the only error was this. error unknown argument '--fs-uuid'
View 6 Replies
View Related
May 7, 2010
As many people have posted before regarding this issue, i think it was me who messed things up as i believe i incorrectly put grub on the sda1 ? when they asked about grub config during installation i was a bit lost, and even though i went off the help it said if you were not sure choose all of them..
So i am wondering if there is an easy way to fix this. As i am running sata drives on my laptop, so my windows xp recovery option is out... and all i have is a windows image, which i would like to try and repair from ubuntu as i can start ubuntu up.
Here is my boot setup:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
View 2 Replies
View Related
Jun 1, 2011
I just installed slack 13.37. I was poking around a little and I noticed that I have all these modules loaded... yet when I open up /etc/rc.d/rc.modules almost everything is commented out. how are these modules being loaded at boot time?
View 4 Replies
View Related
Feb 26, 2010
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
View 3 Replies
View Related
Sep 15, 2015
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
View 0 Replies
View Related
Dec 24, 2010
what is happening on my Centos virtual server (ps I'm having a great time re-learning Linux after a large gap and usually try and find out myself but this has me confused) First thing I did was install Tomcat and try and change the port to 80 using iptables -nat and it complained a kernel module was missing. Instead setup Apache to redirect requests so that's now working I then tried to install CSF firewall and the validation perl script returned fatal errors so I assumed OK my virtual server Kernel is restricted and used denyhosts instead which is working great
Here's the confusion.. I later retried the csftest script and it now works including all the iptables and nat stuff that fataled before. I've not rebooted or changed anything except run denyhosts and the postgres daemon + ended a few daemons that I didn't need (eg pickup,tlsmgr,courier,postfix,qmgr,saslauthd) Running lsmod returns nothing and /proc/modules is zero bytes so I'm not able to tell what is loaded? I'm tempted to try and get Tomcat redirecting via iptables and see what happens but if it works I don't like that something seems to have changed.. before I ran it direct as root now I'm SU into root from another login
View 1 Replies
View Related
Nov 25, 2010
I have installed VMware (VMware-Player-3.0.1-227600.x86_64.bundle) on my laptop. When I open Vmware from Applications/System Tools/VMware Player.I get a window that says: VMware Kernel Module Updater Before you can run VMware, several modules must be compiled and loaded into the running kernel.When I click on install and after putting in my passwd.a window comes up with a list:
Compiling:
Virtual Machine Monitor
Virtual Network Device
VMware Blocking Filesystem
Virtual Machine Communication Interface
VMCI Sockets
But it just try the first one and show an error (window) that says.unable to build kernel module see log file /tmp/vmware-root/setup-9572.log for details.I cannot even go into the folder vmware-root because it says I do not have permissions even though am an administrator.
View 9 Replies
View Related
Mar 10, 2011
0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
View 1 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
Dec 17, 2010
I reinstalled 10.04.(finally) on a single partition mounted as "/". everything went fine until I rebooted, GRUB began loading and then came back with "no modules name found". I found other postings with the same problem,[URL] but this method doesn't work with the Dmraid.
View 6 Replies
View Related
Mar 25, 2011
I am using my new laptop, hp dm4 1150ea, core i5 ( built in graphics ).I burned an install cd ( amd64 version ) of u/x/kubuntu ( all three ) every time i boot from the cd i get the welcome screen, i select to install then the screen flickers and thats it - the screen goes totally black just like the machine is turned off ) the cd drive keeps working away but i have no idea what is going on.Next time i pressed f6 for boot options, and asked for "noapci" and another one i cant remember - this time the boot worked but was very slow at one point.I also tried a cd of Natty alpha3 same deal. Will i ever be able to install normally?
View 4 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Oct 2, 2009
Why does Fedora not recognize any of my live cds?
View 4 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Aug 4, 2010
I'm not entirely new to Linux, but I'm far from a standard user. I decided to give it another try with Fedora on my new Asus G60JX laptop. Specs: Intel Core i5 430m, Nvidia GeForce GTX 360m, Windows 7 Home Premium 64bit.
When I attempt to run the live CD from either a physical CD or a bootable flash drive, it loads as usual. However, once Fedora goes to the desktop, I get this screen:
As you may be able to tell, it's a garbled version of the Windows desktop I had previous to the reboot. Evidently, something in my hardware is not supported. However, I fail to see how I can install drivers when this is literally all I can coax the computer into doing.
View 13 Replies
View Related
Aug 30, 2010
i try update new kernel and got this error when i try to actived tun/tap
Quote:
-bash-3.2# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-164.15.1.el5.028stab068.9PAE/modules.dep: No such
[code]....
View 2 Replies
View Related
Nov 30, 2010
My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.
Then when I tried to access mysite.com, index.php downloads instead of opening.
I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.
View 1 Replies
View Related
Jul 4, 2009
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies
View Related
Mar 16, 2010
Yet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code:
Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
[code]....
View 1 Replies
View Related
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Aug 21, 2010
trying to install the wi-fi drivers for RaLink rt3090. How can I reset the kernel modules to default so I can try again?
View 3 Replies
View Related
Jul 7, 2015
After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.
The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode
Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
...Then several drives show up as clean....
Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented
And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.
After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules
...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.
"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.
Regarding the module-loading features, running "lsmod" shows about 30 lines:
Module
ext3
mbcache
jbd
dm_mod
usbhid
hid
[Code] ....
...I'm at the limit of what I know to check and/or try.
View 1 Replies
View Related
