After an update firefox doesn't load anymore. Whenever I try to install anything apt-get fails and warns me about broken firefox packages. It is mentioning firefox branding and chrome something (the latter seems to have gone away after I removed firefox via synaptic) apt-get install -f fails also.
View 1 RepliesIt never notifies me about any updates.
In my startup following line is present:
update-notifier --startup-delay=60
In my repository settings I have chacked that it should llok for updates daily.
I've got a double boot system (Windows XP Pro and Ubuntu Maverick). Since I updated Grub2, Grub doesn't work anymore! I'd tried this (because I HAD that error). But since than, I'd a black screen (harddisk didn't anything, and Grub too...) And now, after using a couple of these commands via the Ubuntu Lucid Lynx Live CD I get a mini bash in Grub, but no entry's to one of the two systems! What's wrong, and what do I have to do? (and what did I wrong?
View 7 Replies View RelatedFlash is no longer working in Mozilla Firefox after the most recent flash plugin update. I couldn't find any information on it.
View 9 Replies View RelatedEverything worked fine until yesterday, but now when I open Firefox and I try to load a video, I simply get the black video. It's like it is loading but nothing appear and nothing happens! The page is loaded but the video is not shown
I changed anything, I tried to "reinstall" the .so flash plugin... but no luck :S
I also tried to start firefox from command line to see if there's something wrong but nothing...
It's like the loading time for the flash video is infinite.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
This morning I switched my machine and the Update Manager prompted me to upgrade.So, as usual I did it. After upgrade it asked me to restart. Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.
View 9 Replies View RelatedJust before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?
View 7 Replies View RelatedIt used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies View RelatedI've upgraded to Ubuntu 11.04 some weeks ago and after some minor tweaking everything has been working fine. But all of a sudden, it seems after some package upgrades, I'm experiencing strange behavior: The first thing I noticed is that after reboot the default application that should be kept in the Unity Launcher have all disappeared. The unity launcher doesn't hide itself anymore. The unity launcher does not react to changes I make via the 'System Settings'->'compizConfig settings manager'->'Ubuntu unity plugin' menu (icon sizes in launcher, hiding method, etc.). Even after logout/login or reboot the changes aren't applied, although the corresponding settings in the configuration menus remain changed.
One application that used to work as a charm started giving the following error on startup: The program 'VESTA' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 489 error_code 3 request_code 138 minor_code 4) Since yesterday everything was still working properly and today I get this strange behavior, it seems that something must have changed in between. The only changes on the system in the last 24 hours are the upgrades of the following packages:
[Code]....
I am a newbie in Linux and have only been recently using it. I have faced a problem with my the firefox browser launch. Recently there was a update (to generic version 2.6.32.24) after which the browser fails to start. It gives the message starting Firefox web browser and then dies off. I tried searching for some already posted answers but couldn't find much.
View 4 Replies View RelatedI updated Firefox today via Yast, since this time it doesn't show any page.I choosed in Configuration no proxy.The sites are empty, nothing just white.I also tried a downgrade to the previous version, didn't help.The Firewall I deactivated for test in Yast, too.A new profile didn't help, starting as administrator either not.
View 4 Replies View Related(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies View RelatedRecently I have installed Fedora 10. It comes with firefox 3.xx by default. Now I was wondering if there is any way through which i can update it to 3.5 version though yum. I have tried yum update firefox but it did not work and returns following messages Loaded plugins: refresh-packagekit Setting up Update Process No Packages marked for Update I know that one way to update is download the latest Tar package and use it, but I want to totally remove my previous installation and use solely one package i.e. firefox 3.5.
View 6 Replies View RelatedNormally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies View RelatedI upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
I'm running Natty Beta, I did a dumb move by attempting to enable desktop cube from Compiz Config, and it disabled the Unity plugin.Now I can only see my desktop, I can't get any panels or even Unity to load. I can't even edit the compizconfig file.
View 2 Replies View Relatedwhile trying to boot in windows 7, I accidentally hit the wrong Grub option, which started a recovery service for window. I got a white screen with red letters saying ERROR and the computer froze there. I decided to reboot it, but now all I get is the Grub rescue prompt.
View 3 Replies View RelatedI cannot get Ff to load anymore. It had been working perfectly. Nothing happens from icon click.When I try to load from terminal I get the following error message.
(process:1767): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Could not create gnome accelerators directory `/home/bren/.gnome2/accels': Permission denied
I have freshed installed lucid.Linux ubuntu 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/LinuxThe problem is firefox is very very slow to open web sites.
View 1 Replies View RelatedAs many people have posted before regarding this issue, i think it was me who messed things up as i believe i incorrectly put grub on the sda1 ? when they asked about grub config during installation i was a bit lost, and even though i went off the help it said if you were not sure choose all of them..
So i am wondering if there is an easy way to fix this. As i am running sata drives on my laptop, so my windows xp recovery option is out... and all i have is a windows image, which i would like to try and repair from ubuntu as i can start ubuntu up.
Here is my boot setup:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
i have Vista 64Bits Ultimate installed on an 1TB hard disk whit 3 partitons I have a 2nd 160GB HD in my system which i installed Ubuntu 10.4 on. All went ok, except after the installation finished and the system rebooted it booted straight into windows, whitout ever displaying GRUB. Now i found a way to boot either system, by using the bios and setting the applicable HD to 1st device. (or something similar)
Any way on how to solve this? keeping to have to enter the BIOS to select the HD and Thus OS i want to boot aint very practical. (im currently using ubuntu BTW)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]...
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies View RelatedI've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock)
1 Gb OCZ PC-3200 ram (2x512)
PNY Verto FX5200
Western Digital 40 Gb IDE hard drive
based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
In running Update Manager in 10.04 I get the following error message; Could not download the upgrades The upgrade is now aborted. Please check your Internet connection or installation media and try again. All files downloaded so far are kept. Failed to fetch http://us.archive.ubuntu.com/ubuntu/...uild2_i386.deb Size mismatch Also, I can't boot to XP anymore.
View 1 Replies View RelatedWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I'm attempting to triple boot Windows 7, Mac OS X, and Ubuntu 11.04 on non-Mac hardware. Chameleon is my primary bootloader, which is supposed to chainboot into grub2, but all I get when I choose the Linux boot option is a black screen with blinking cursor. If I try to boot Ubuntu while holding shift, I get the word GRUB, followed by a space and a blinking cursor. grub2 is installed to the Ubuntu partition, and attempts to reinstall it there or to the MBR from a LiveCD result in errors. The MBR and GPT partition tables are synchronized. How do I go about making Ubuntu bootable, without breaking my other two operating systems (or at least leaving them recoverable)?
I built a new desktop computer.The goal was to triple boot the system with Windows 7, Mac OS X Snow Leopard, and Ubuntu 11.04. This endeavor has been significantly more complicated than I originally expected, but with the of a forum-goer at InsanelyMac.com, I've managed to get pretty far with a complex installation process. I've attempted to get Ubuntu running using two methods, neither of them achieving what I'm hoping. Both methods follow.
In the first method, I install Mac OS X using a specially designed install CD that boots into the Snow Leopard installation DVD. The disk is partitioned to have a FAT partition, followed by a Mac OS X journaled partition, ending in a second FAT partition. Mac OS is then installed to the second partition. The Windows boot CD is then used to format the first FAT partition as NTFS, which Windows 7 is then installed to.
As I'm sure you know, this installs Windows Boot Manager. Then I boot into OS X using the boot CD mentioned earlier, and install Chameleon, a bootloader specifically designed for Hackintosh systems, and (supposedly) capable of booting into all three operating systems I'm trying to work with. Finally, I divide and reformat the remaining FAT partition into an ext4 partition and a swap partition, and install Ubuntu to that ext4 partition, with the bootloader installed to the same partition. This will break the Windows bootloader, as now the MBR and GPT tables are no longer syncronized. Ubuntu is also unbootable; attempting to chainload into grub2 leaves me at a black screen with a blinking cursor. The former problem is solved by booting into a LiveCD and installing and running gptsync. Windows is now bootable, but Ubuntu remains in 'limbo'.
The second method I attempted is very similar, but deviates in the last few steps. After installing Windows, I instead install Ubuntu 10.04 LTS, as I thought I might have fewer bootloader issues with that distribution (don't ask why; it was a lucky hunch).This breaks Windows Boot Manager, but this time grub2 throws me into the grub> prompt.I can boot into Ubuntu just fine using the set root/linux/initrd/boot commands, but my motherboard's Ethernet port is not detected by the OS, so I can't directly download and run gptsync. Once I do manage to run it, though, Windows is then also repaired.
Unfortunately, since I can't access the Internet, I can't do a distribution upgrade that way. Trying to upgrade from the recent release's LiveCD...well...doesn't upgrade, just overwrites. So I get the same black screen with blinking cursor problem. I've tried reinstalling grub2 through a LiveCD using grub-install both using the --root-directory flag and the chroot method.
System specifications:
Intel Core i7 (LGA1155)
Corsair VENGEANCE 4x4GB DDR3
[code]...
Ubuntu Software upgrades indicated that there were some Firefox updates available. While updating, computer screen went blank and froze up. I manually shutdown and after restarting, Ubuntu no longer loads. It goes through some steps but then it goes to a login/password prompt. After putting in a login and password it takes me to, what I think is "Terminal".
I am a newbie, but I love to learn. I'm reading the Pocket Guide right now. I have many questions. What can I do at the "Terminal" prompt? An even better question is: When I have a problem after an install or update, can I do a "recovery" to before the install/update? If I continue to have problems, is there a way to recover the OS without losing saved data?
I'm hoping that I will learn a lot from the Pocket guide. I think that Ubuntu is going to be the OS of the future.
Why does "Ubuntu" still come up as a misspelled word in this text box?
im dual booting ubuntu and win7 (i installed ubuntu using wubi)yesterday i ran the update manager and i noticed it installed a kernel update.since then, whenever i reboot i get the boot loader menu asking me to choose between win7 and ubuntu, but when i choose ubuntu, instead of the regular menu that asked me which kernel version i wanna use i get a command-prompt-like interface with the title:
View 1 Replies View RelatedI started the update process in my new Ubuntu Studio install.
My understanding of the update process is:
1) Downloads all of the update files (in my case 214)
2) It performs the necessary installation of these files.
My machine locked up at the 70% done part during step 2.
Now, when I try to boot/load the OS it stalls at the splash screen.
I am not even sure I can get to the recover part from Grub yet, but if I can...
Is there a command that can start the update process without having to download the data again?