Ubuntu Installation :: Updated Kernel Will Not Boot ?
Nov 28, 2010
I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies
ADVERTISEMENT
Jul 8, 2010
I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
View 9 Replies
View Related
Jul 15, 2010
I have not been using my lenny 2.6.26-2-amd64 for about a month or more.I booted it today, and there were over 30 updates available, inculding some kernel header updates I installed all these updates and rebooted.Well, there are 2 new entries to grub menu:Linux 2.6.32-bpo-3-amd64Linux 2.6.32-bpo-2-amd64 (single user or recovery)in addition to my old kernels.So, I chose the bpo-3 entry, but it just sits there.I have to chose the kernel before the update. Is there something wrong with the update? dit: I just found out that synaptic manager does not show 2.6.32-bpo-3-amd64 at all as being installed.In fact, it is not in the header list nor the image list.
View 5 Replies
View Related
Apr 30, 2011
Just updated to kernel 2.6.37.6-0.5 from:[url]
No error. then rebooted and grub gives following error:
Press Any Key to Continue
this goes to grub boot menu where I then select my old kernel 2.6.37.1-1.2-desktop and it boots OK.
Question: Should root(hd2,2) be (hd0,2) like the working kernel?
My menu.lst is:
sda and sdb are not used at this time, sdb will have 12.1 Ms soon. The two windows drives are used by virtualvox for WIN XP backup. Not used often.
View 7 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
Mar 25, 2010
So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies
View Related
Apr 20, 2011
I'm using 10.04 LTS and updated to the last kernel. After reboot the system is hanged to the grub>
I tried to reinstall grub with the 10.04 live CD but the same thing append after reboot!
The only thing I can think of is that the machine is a RAID 1 system! What can I do to restart it normally?
View 6 Replies
View Related
Jan 21, 2009
I had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
View 3 Replies
View Related
May 9, 2010
I've got a dual boot system with both Vista and Ubuntu. After upgrading to 10.04 my Vista doesn't load anymore. I select it in the Grub menu and the computer just hangs.
Are there any known fixes for this? Where do I start? I'm an Ubuntu novice, but I'm an able computer fixer.
View 1 Replies
View Related
Jun 15, 2010
I have grub dual boot. I upgraded from ubuntu 9.04 to 10.04 today, there was some questions about grub, and I marked all of the /dev. But now I cannot boot my windows partition.Windows XP is on the grub boot menu, but if I click on it, a black screen show up, and only a blinking cursor.When i boot ubuntu, I can read the ntfs partition.What do I have to do, to get windows xp to boot again?
View 5 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Dec 1, 2010
Wanted to try Ubuntu for the first time i used a wubi install and i made sure i had duel boot when i selected for the installment because id like to play some games every once in a while well i got some updates from Ubuntu today and after i installed them when i restarted my computer i noticed that windows 7 wasn't there to choose.
I have 10.10 installed idk if this will help but here # RESULTS.txt
View 4 Replies
View Related
May 2, 2011
Hey, yesterday I decided to update from 10.10 to 11.04.
I was using Windows Vista in dual-boot with Ubuntu but after updating Ubuntu to 11.04 I lost my dual-boot menu. It worked without problems before update. Now it starts automatically to Ubuntu log in screen.
I've tried so far:
1. Updating GRUB via terminal
2. Looked at my menu entries
Code:
grep menuentry /boot/grub/grub.cfg
menuentry 'Ubuntu, Linux-ydin 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
[Code]....
View 9 Replies
View Related
Oct 11, 2010
Hey everyone I'm pretty new to ubuntu/linux so please bear with me . I recently installed 10.10 on my new htpc. The initial install went great, until I went to install the updated driver for my graphics card. What I did was I downloaded the driver off of nvidia. Then I did these steps:
1. ctrl-alt-f1
2. logged in
3. sudo services gdm stop
4. I then located the driver package that I downloaded and ran it, it seemed to install fine (except for an error about some install script? but it let me proceed)
5. sudo services gdm start
It went to the gdm/ubuntu desktop. However I then connected it via HDMI, and the resolution was way off (top bar was not even displayed on TV) and I tried many different settings but no luck in fixing it. Next after restarting it did not automatically boot to the gdm/desktop. Instead it stayed at the command line login (the ctrl-alt-f1 screen).
tl;dr : 1. How to make it automatically boot to the gdm/desktop after I updated my gpu driver
2. How to fix the resolution for HDMI from my gpu to my TV. (DVI works fine
View 1 Replies
View Related
Feb 8, 2011
Ubuntu 10.10 on both PC's.
One is updated to kernel 2.6.35.25, but the other one does not give me any updates for kernels..so it still has 2.6.35.24. I don't understand this.
View 9 Replies
View Related
Feb 11, 2010
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
View 11 Replies
View Related
Jun 16, 2010
I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
View 8 Replies
View Related
Jan 5, 2010
i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.
To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........
View 5 Replies
View Related
Aug 30, 2011
I just updated my Squeeze install now the current kernel version is now 3.0.0-1-686-pae. I now no longer have any internet connection.I have tried the failsafe boots with no luck. I have tried the 2.6 kernels and have had no luck.I have tried to manually start the connections with no luck.I have booted off of a Squeeze Live CD and the connection works just fine.
View 4 Replies
View Related
Feb 8, 2010
I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
View 14 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
Jul 19, 2011
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
View 11 Replies
View Related
Apr 17, 2010
I just updated to 2.6.33 kernel and I am using an Intel Mac with ubuntu 9.10 running native. I upgraded because the new kernel has sound working for the imac (at least through headphones). Once the kernel was updated to 2.6.33 the proprietary NVIDIA graphics driver which I had activated through systems -> administration -> hardware drivers is now inactive and will not work. systems -> administration -> hardware drivers says to look in /var/log/jockey.log, here is the last part of that file [URL]. PLEASE HELP OUT. I hate using the Mac os on the other partition.
View 2 Replies
View Related
Jul 26, 2010
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
View 1 Replies
View Related
Feb 26, 2010
I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies
View Related
Feb 10, 2010
I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
View 14 Replies
View Related
Aug 26, 2009
I have installed CentOS 5.3 with Xen on a PowerEdge 2650 machine with 6GB of RAM. As usual, PAE was already enabled so I did not have any problem with utilising all of the memory. However after upgrading to the latest release of the kernel (2.6.18-128.7.1.el5xen), memory available decreased to 4GBs. Then I switched back to the old kernel and 6GB was there. Then finally have switched back to the new kernel and 6GB is again there. So now PAE seems to be enabled but what concerns me is the inconsistent behaviour. (Also I am not sure the reason was the upgraded kernel.)
View 2 Replies
View Related
Nov 30, 2009
I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
View 6 Replies
View Related
Dec 9, 2010
Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies
View Related
Sep 2, 2010
i used dual boot system (xp + ubuntu 10.04) and decided to replace them with jolicloud os and then it started In about 86% of jolicloud install it showed me error of hdd partition. I tried different versions of partion type, used also option to install on entire hdd - none of my tries actually worked (also with many hdd formating tries) so I was able to use only usb as live user for Jolicloud, and i burned ubuntu iso on disk - on boot up showed boot up error, i checked BIOS and everything seemed to be ok with boot order. So after many tries i took my old Gutsy Gibon 7.10 live cd. I first updated it with LTS version (8.04 Hardy Heron) and after that I updated it to 10.04 but it seemed to not finish when i saw some error in terminal and installer was exiting 13 minutes before finish then it had kernel panic - fuuuuck! After that i tried to download small versions of linux like Austrumi and puppy linux , but it showed me boot error or cd didnt even open install dialog without showing boot error.
View 1 Replies
View Related
