OpenSUSE Install :: Updated Kernel Will Not Boot - 2.6.37.6
Apr 30, 2011
Just updated to kernel 2.6.37.6-0.5 from:[url]
No error. then rebooted and grub gives following error:
Press Any Key to Continue
this goes to grub boot menu where I then select my old kernel 2.6.37.1-1.2-desktop and it boots OK.
Question: Should root(hd2,2) be (hd0,2) like the working kernel?
My menu.lst is:
sda and sdb are not used at this time, sdb will have 12.1 Ms soon. The two windows drives are used by virtualvox for WIN XP backup. Not used often.
View 7 Replies
ADVERTISEMENT
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
Jun 3, 2010
I had a normal OpenSuse 11.1 setup, along with Windows XP, swap partition and /home partition. After my hd began failing (badblocks), I cloned the system to a different location (using ddrescue), updated the hd with a new one (bigger), made new partitions on the new hd (preserving the old locations, ex: /dev/sda1 ext3 on old hd still is /dev/sda1 on new one, but made changes to the partitions sizes to make them bigger), recovered all the clones to the new hd, fsck'ed them, recovered grub with install dvd then tried to boot.
On the first boot, it failed to mount / (/dev/sda1) and gave me a command line. I checked /etc/fstab and saw that, on the old setup, it was mounting the partitions based on the HD-id, which obviously changed. I fixed that to use /dev/sda1, /dev/sda2, etc. Now, the systems boots fine. But, when I get to the graphical login part, the keyboard and the mouse don't work. It's a Dell Inspiron 1525 notebook, now with a 320gb samsung hd.
View 6 Replies
View Related
Jul 15, 2010
I have not been using my lenny 2.6.26-2-amd64 for about a month or more.I booted it today, and there were over 30 updates available, inculding some kernel header updates I installed all these updates and rebooted.Well, there are 2 new entries to grub menu:Linux 2.6.32-bpo-3-amd64Linux 2.6.32-bpo-2-amd64 (single user or recovery)in addition to my old kernels.So, I chose the bpo-3 entry, but it just sits there.I have to chose the kernel before the update. Is there something wrong with the update? dit: I just found out that synaptic manager does not show 2.6.32-bpo-3-amd64 at all as being installed.In fact, it is not in the header list nor the image list.
View 5 Replies
View Related
Jul 8, 2010
I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
View 9 Replies
View Related
Nov 28, 2010
I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Jan 31, 2010
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
View 9 Replies
View Related
Jan 25, 2011
I received a kernel update a few days ago. When I try to boot with kernel 2.6.37, I get a few errors saying that a volume couldn't be mounted and that /lib/modules/2.6.37-desktop/modules.dep couldn't be found. I'm then left with a minimal terminal prompt.
Is this a common problem? If not, I'll try to take a picture of the error so that you can see exactly what happened. I can still boot with kernel 2.6.34 like I could before the update.
View 9 Replies
View Related
Apr 17, 2010
I'm trying to work with Xen for the first time,if I mess up some of the lingo here or if I don't quite make sense. I've been running openSUSE 11.2 since it first was released, and after an initial problem with my video driver, its been working great. I tried to install Xen today, and after the install appeared to complete successfully, it asked me to reboot and boot into the Xen kernel. When I did this, although the system booted up to the command line, it didn't launch KDE. When I try to start KDE manually it tells me that it "Can't connect to X server".
This seems to be roughly the same problem I had when I first installed openSUSE but I can't for the life of me remember how in god's name I fixed it.
View 1 Replies
View Related
Sep 23, 2010
My laptop threw a wobbly recently (same time as kernel update?) I have got it to find the old kernel, but it still won't boot.It's a 11.3 install, dual-booted with XP. The /boot partition is in the root partition - sda7. Why is it trying to mount sda7 as swap? (not in fstab like that)
View 2 Replies
View Related
Oct 3, 2010
i need to use the realtime kernel because i use jack audio connection kit so i tried to install the realtime kernel from the install/remove software program. I've found 2 kernels : Kernel-trace and kernel-rt i tried both of 'em but i cannot boot up suse. The first one gets to 3/4 of the loading bar , i hear the welcome sound and then it won't do anything else. The second won't do anything, black screen.
View 9 Replies
View Related
Nov 9, 2010
I am unable to boot the xen kernel but can boot the desktop kernel. The machine boots and the last message I see is:
(Xen) Created cpupool 0 with Scheduler SMP Credit Scheduler (Credit)
After this the screen just turns into a random mess. It looks like graphics memory is pointing at a area of memory filled with random data. The computer actually boots but the display is unusable and the keyboard fails (num lock doesn't work). I can cleanly halt by pressing the power button and waiting for disk activity to stop. After reading several other threads I've tried various combinations of vga=mode-0x0f00 and nomodeset but the result is always the same. I've set the vga mode to 0x0f00 as I actually get to see up to the "Created cpupool...." in this mode. The system boots without any issues with opensuse 11.2.
I'm using a gigabyte GA-Q35M motherboard and the output from lspci is:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) .....
View 7 Replies
View Related
Feb 22, 2010
I had no enough space under /boot & i tried to resize this patition without success. A Linux-user's told to me that it is possible to erase the latest kernel releases but i have no idea about this think.
View 2 Replies
View Related
Sep 29, 2010
I've recently performed a clean upgrade from 11.0 to 11.3 (wipe / partition to ext4, retain /home disk, swap partition etc.) and everything is fine, installed as Gnome distro with KDE3 from repos.Anyway, I've noticed that SuSE will say "doing fast boot" and suspend any console spew until after the kernel has finished with hardware detection and the like. I'd like to be able to see exactly what's happening with the kernel at boot, as I'm quite paranoid and in the event of system failure etc. it would be difficult to view the logs post-boot. Also, my IDE optical drives have a habit of sometimes only being partially detected due to the power line being somewhat intermittent, and I've seen the kernel attempt to re-stablish a link on 11.0, whereas I'd never be able to see that in 11.3 unless I see the console spew, so it would look like the system hanging on "doing fast boot".
Note: I do not want to disable splash=silent, unless spalsh has another option which will give me the desired functionality. I want to have a silent boot, with the option of going verbose with Esc; it's one of the things that I love about SuSE.Oh, and Grub was a nightmare as usual with disk ordering differing at run-time from config file and the total freeze at "loading stage2", so I had to manually fix that. Why does the installer seemingly ignore or revert the specific options I set for GRUB? I understand that the default options for GRUB are ok for single disk users, but my disk ordering is not overly exotic. I stress that this was not user error, as I've had the same issue from going from 10.2 to 10.3 to 11.0, even though they were clean grub installs (rewrites). /rant.
View 1 Replies
View Related
Oct 4, 2010
Yesterday I updated openSuse 11.3 on my laptop. Kernel update from 2.6.34.4-0.1... to 2.6.34.7-0.3-desktop was included. Yast performed fine and at the end it stated to reboot for using the new Kernel. So I did, but what a bad surprise!! Normally the Grub menu should have been updated, but not this time. Fortunately I know how to handle this, but not all users will be able to resolve this problem, so here's what to do if this happens to you: You will run into the Text console saying: Press any button to continue... Before doing this write down on a piece of paper the text lines visible on the screen, starting with:
kernel /boot/vmlinuz-2.6.34.4-0.1-desktop root=/dev/disk/by-id/ata-Hitachi....... resume=/dev/disk........
or whatever it reads for your system. You will need this info to edit the menu and succeed to boot. Now press any key and you will get the Grub menu. The standard option will be highlighted. press "e" to edit that option. Next you will see the Grub menu lines
First press key "o" to add a new line, select it by arrow down, press "e" to edit the line. (In my case it was not possible to edit the full original line, but only the added options like vag=0x317) Enter the line you wrote down, but change the kernel's version number to the new one Should look similar like:
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Hitachi.......
(it works if you only use the part before "resume=/dev/disk....") After finishing hit Enter and you will turn bach to the Grub menu lines. Now move with the up/down arrow key to the old line, press "d" to remove the old line. Next move to the line with "initrd /boot/initrd-2.6.34.4-0.1-desktop", press "e" and edit the line so that it reads: initrd /boot/initrd-2.6.34.7-0.3-desktop press Enter to move back to the Grub menu lines. Now press "b" to boot. After booting log in, open your file manager as root, browse to /boot/grub and open the menu.lst file to edit and change the kernel old version numbers to the new one. Save it and next time it your machine will boot normally again.
View 1 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Nov 29, 2009
I installed Opesuse 11.2 and I manged to install the Nvidia driver and it works fine. Then I enabled the Compiz and it works fine. During the Opensuse 11.2 installation I installed the XEN becuase I wanted to run multipile XEN guest, I have Nividi GeForce 9600 GT and I have 8 G of RAM and 1.5 TB.
When I decided to boot from XEN mode, it do not boot and it went to the terminal, I logged in I tried to install the Nivid driver in XEN mood and I wan in the init 3, it says:
The NVIDIA driver does not currently work on Xen kernels. If you are using a stock distribution kernel, please install a variant of this kernel without Xen support; if this is a
custom kernel, please install a standard Linux kernel. Then try installing the NVIDIA kernel module again.
I tried with the following Nvidia Driver;
After installing the above driver in normal kernel (non XEN kernel), it works fine but as soon as I boot to the XEN mode it just goes the terminal.
Kernel info:
The X11 fiel :
It must be some wrong with my installation or is there any patch for that.
View 4 Replies
View Related
Sep 28, 2010
Is it possible using YAST to make it possible to be given the option to boot the previous kernel when a new one is installed during an update?
View 9 Replies
View Related
Apr 20, 2010
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies
View Related
Sep 21, 2010
Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
View 2 Replies
View Related
Mar 14, 2011
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
View 1 Replies
View Related
Jul 12, 2010
Will 11.2 be updateable through yast to 11.3?
I have to get this workstation out onto shop floor, back into service, wondering if I put 11.2 in now then update to 11.3 while in service. It has 10.3 in it now.
View 5 Replies
View Related
Jul 17, 2010
I have done a update from openSuse11.2 to 11.3 .,(not new install,I did update install). Now at my PC home / partition after NEW INSTALL of SuSE 11.3 file system shwos 10.6 GB(space taken,busy),it's ok.But on my laptop where I did UPDATE INSTALL / file system has 25 GB(space taken,busy).
My question is how can I release 10 Gb form my laptop(we all fight for free space). The difference it's clear>making update takes more space comparing with new install. I am thinking that the system from my laptop kept old filesytems as backup or whatever.
The situation it's similar with the case when I did a kernel compile (taking more space),but in that case I knew how to do,of course I erased the old configuration files,old kernel,old boot files/vmlinuz etc) after checking the new one kernel and boot from it ,ok status. But in the update case I don't know what should I do,because it's the first time after manny years when I did a update ,not a new install(from scratch) and Suse 11.3 it 's after few days of releasing,and of course it can have some tricks.I assume that you did more updates install for OS than me .So I kindly ask you to advice me.Where shall I look and what shall I delete without affect the stability ,operatibilty ,boot of OS and security for my system existed on my laptop.Please,think 25 GB comparing with 10.6 GB. It's something,isn't it? I would like to have back my 10-12 GB in my hard disk as free space.
View 6 Replies
View Related
Nov 23, 2009
I've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.
Where can one find the source for this module?
View 1 Replies
View Related
Feb 9, 2011
Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
[code]....
View 9 Replies
View Related
Mar 21, 2010
I use Factory repositories of KDE4 and there are new releases almost every day in that repository. Although I believe that there are useful updates in the packages, I don't think they are really that crucial that I should update them every day.
When I do update, I usually use graphical frontend and select from menu: Packages >> All Packages >> Update if newer version available. That includes all the updates available either for the program or the package.
I'd really like to be able to sort out these packages that have updates for the programs available. Is there any way to do it?
View 9 Replies
View Related
Jun 25, 2011
Doing an install of Suse 11.4 --- and the screen runs off the monitor to the right. A little guess word with the tab key and I could move through the install process by tabbing three times after the ""help" button. As I'm writing this the machine rebooted after initial load and the screen is okay - and I can see the abort-back-next buttons now. But really, what's with that? That's just so unprofessional. Hopefully the dev team reads these forums since there isn't any easily discoverable way to communicate with them. And you don't keep the iso's updated? The BETA of Firefox 4?? Really? Then I can only update to 4.01 from the repository? so I download an unpack the 5.0 from Mozilla -- and find out ./configure no longer works. The archive extractor still doesn't have an "install package" option anywhere, and now I can't use the command line either?
View 8 Replies
View Related
Apr 11, 2011
I just used the on-line update to upgrade from 11.3 to 11.4. Now when I click the computer button in lower left, there are no entries under system, ie. control center, yast, install, lock, logout, shutdown. How do I get those back?
View 9 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
