Fedora Hardware :: Wacom Drivers And Kernel Updated - Tablet Hanging
Nov 30, 2009
I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
View 6 Replies
ADVERTISEMENT
Feb 10, 2010
I have recently bought a Wacom Bamboo Pen Tablet, and just as recently installed Fedora 12 KDE for its supposed "excellent tablet support".
Well, I have yet to see any of that. Unless the fact that I'm using KDE affects this (and I'm staying KDE, no more GNOME for me!), I see no reason why my tablet should not work. It was working fine in Windows Vista Home Premium 32-bit (though the last time I started up in Windows it said it didn't recognize the device).
None of the applications that I've heard implemented in Fedora to support tablets were installed, but then again they're all probably GNOME apps, am I right? Still, my tablet should at least act as a mouse? I checked KPackageManager, and it said that the latest linuxwacom driver was installed. So why isn't anything working?
It seems as if everything - all this talk about tablet support in F12 - is just for GNOME. About the only thing working with my tablet as I type this is the status light, which indicates it being recognized as a USB device, and it flashes like it should when I tap the surface with the pen, but it seems as if there's nothing to receive the input. I even installed the latest GIMP, and when I checked Input Devices, nothing relating to the tablet was even there! At least on Windows it showed the Pen and the non-existent eraser, though neither worked properly, but it seems as if Fedora 12 doesn't even know it's there!
I shouldn't have to change anything in xorg.conf, because I thought that linuxwacom did it for you?
View 6 Replies
View Related
Jun 12, 2010
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies
View Related
May 31, 2010
I've just installed Fedora 13 and I have a question. How do I tune my tablet? I've tried to set threshold and aspect in xorg.conf just like in Fedora 11, but it doesn't work in the current release.
Here's a part of my xorg.conf:
I also tried 'xsetwacom' command, but I get errors.
View 1 Replies
View Related
Jun 17, 2011
I recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
View 1 Replies
View Related
Dec 9, 2010
Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies
View Related
Mar 22, 2009
im trying to use my wacom tablet with fedora 10. I have looked around the net trying to find a simple way to install the driver but it is all rather technical would some one be able to give me a basic how to it would be great
View 2 Replies
View Related
Apr 9, 2011
as a kind of luxory item I am thinking of adding a bamboo to my PC. Before putting action behind this, I wonder how much of a hazzle this brings about. Has anybody of you experience with 11.4 in this field? If a hazzle: Can anybody be bothered to compile the driver and provide it as a 1-click on the build service - or even in the official repositories? Would there be full functionality actually after all? BTW, I am aware of the wacom SF-site.
View 9 Replies
View Related
Mar 6, 2010
My Wacom tablet's cursor skips around the screen and makes it impossible to use. Is there a way to use wacom-tools (wacomcpl) to fix this? Or, is there any known way to fix this?
View 4 Replies
View Related
Apr 29, 2010
I have a wacom pen and touch tablet and am running 10.4 what is the easy way to install and get it working?
View 9 Replies
View Related
Feb 10, 2010
I am attempting to set up a wacom bamboo tablet with ubuntu 9.04 (latest version for netbooks).
I have followed howto advice however i have failed to produce the wacom.ko from the downloaded driver. The driver from the Linux wacom project is "linuxwacom-0.8.4-4.tar.bz2"
There appears to be a problem when i use ./configure --enable-wacom thereafter make and install fail to produce the required files. Below is the message when configuring the file.
*** WARNING:
*** Unable to guess kernel source directory
*** Looked at /lib/modules/2.6.30.5-ep0/source, /lib/modules/2.6.30.5-ep0/build,
*** /usr/src/linux, /usr/src/linux-2.6.30.5-ep0, and
[ode]....
View 1 Replies
View Related
Feb 16, 2011
It's a CTH-460. I downloaded the driver from the linuxwacom project and followed the instructions.
It doesn't work yet but lights turn on, and the pointer follow the displacement (no writing is possible). I have tested also in Windows Machine and it works perfectly well.
My machine is an ASUS VX2S and the distro is Ubuntu 10.04.
View 1 Replies
View Related
Jul 17, 2010
I decided to write here because I was wondering if there are any Wacom Bamboo (MTE-450) tablet users who experience any resume problems with their tablets on 11.3. I experience this issue on 11.2 - tablet was not working after resume from suspending to RAM - I had to replug it in order to make it work. Now when I upgraded to 11.3, the issue was still there.
Finally, I was able to "workaround" the issue by doing the following (found on some Ubuntu groups):
Code:
echo 'SUSPEND_MODULES="wacom"' | sudo tee /etc/pm/config.d/50wacom
I am wondering if that happens to anyone else and if it still the case for a freshly installed 11.3.
View 1 Replies
View Related
Feb 4, 2010
I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
View 3 Replies
View Related
Jun 6, 2010
I have recently purchased a Wacom Bamboo Pen & Touch tablet and have got it working with Ubuntu 9.10 (Karmic) by following this post: [URL].
I am now trying to trap the actual data coming from the bamboo as I write with the pen and found some threads suggesting that if I do an xxd one of /dev/ttyS[0-4] I should be able to see output. However when I do a "sudo xxd /dev/ttyS0" the xxd command finishes straight away.
If I run the command "xxd /dev/input/mouse1" I can the data coming from the mouse movement so I am expecting to be able to see the same sort of thing coming from the wacom bamboo pen. Both the bamboo and the mouse are USB connected.
Does anyone know if the stream of data coming form the wacom bamboo should go to /dev/ttyS[0-4] or should I be looking elsewhere?
View 3 Replies
View Related
Aug 12, 2010
I was messing with xorg.conf trying to get my wacom tablet to work. I restarted and it brings be everytime to a terminal. I can log in but that is about it. When I type startx it says xorg.conf is messed up bad. I already tried:
[Code]...
View 9 Replies
View Related
Jul 24, 2010
There has been a lot of effort invested in getting external USB connected anything to work well during the connect then disconnect processing. It seems that there are troubles with OEM serial digitizers like those built-in for a tablet-PC. The built-in OEM devices do not have the same sort of connection events to trigger device creation and configuration.
Does anyone know how to make all of the find-hardware then create configuration processing visible? While I find several postings that describe "... edit xorg.conf ..." but then those edits don't want to work with the recent evolution in Xorg and X11-server configuration that deprecates (abandons?) xorg.conf. Does anyone understand what is going on with Xorg and X11-config to help me get my tablet working? Has anyone used an external USB tablet, then adapted those configuration details to get an OEM tablet working? I know that every tablet is different, but if the external device connect-creates-config process works best, it seems there might be value here.
View 4 Replies
View Related
Dec 30, 2010
along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
View 9 Replies
View Related
Mar 7, 2011
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
View 3 Replies
View Related
Aug 1, 2010
I'm running F13, Is that possible? Can I use a rawhide repository to update my radeon floss driver and get latest updates?
View 1 Replies
View Related
May 26, 2011
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies
View Related
Mar 16, 2010
I have a nVidia GeForce4 MX 4000 graphics card. How do I install the updated nVidia drivers so I can use the desktop effects in KDE?
View 5 Replies
View Related
Jun 16, 2010
I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
View 8 Replies
View Related
Jan 21, 2009
I had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
View 3 Replies
View Related
Feb 8, 2010
I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
View 14 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
Jul 19, 2011
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
View 11 Replies
View Related
Feb 26, 2010
I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies
View Related
Jun 21, 2010
I'm trying to recover files from a desktop PC which has 4 HD running on a RAID (0+1) set-up. Now it would appear that either Vista Raid has failed (which I think will be the issue) or one or more of the HD partions has become corrupt. So, I have installed Ubuntu Live on USB and have succesfully booted; however, Ubuntu does not appearing to be loading as it is stuck on "loading essential drivers".
View 1 Replies
View Related
Dec 23, 2010
Yesterday fedora automatically updated the linux kernel, and now it wont start entirely up. After the fedora logo has finished loading up the white, and it has turned into the real logo, nothing happens.However, i can boot into fedora with the old kernel via grub, so i guess it is related to the kernel update.
View 14 Replies
View Related
