Debian :: Kernel Updated To 2.6.32-bpo.3-amd64 But Won't Boot?
Jul 15, 2010
I have not been using my lenny 2.6.26-2-amd64 for about a month or more.I booted it today, and there were over 30 updates available, inculding some kernel header updates I installed all these updates and rebooted.Well, there are 2 new entries to grub menu:Linux 2.6.32-bpo-3-amd64Linux 2.6.32-bpo-2-amd64 (single user or recovery)in addition to my old kernels.So, I chose the bpo-3 entry, but it just sits there.I have to chose the kernel before the update. Is there something wrong with the update? dit: I just found out that synaptic manager does not show 2.6.32-bpo-3-amd64 at all as being installed.In fact, it is not in the header list nor the image list.
View 5 Replies
ADVERTISEMENT
Jan 24, 2010
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies
View Related
May 23, 2010
I tried to compile an x86 linux kernel from amd64 machine. It is giving errors even after installing "gcc-multilib" But I wonder, it should be simply doable becuase "gcc -m32" creates 32 bit binary . I would prefer to compile it natively on x86_64 rather than creating an exclusive x86 chroot for that. Has anyone tried this on native x86_64?
View 4 Replies
View Related
Apr 16, 2010
I'm using Debian Sid (kernel 2.6.32-4-amd64)
I encounter a problem with the pakage cdcd : cdcd sees my CD, for example the command "track" gives the list of the tracks but with the command "play" there is no sound. I encounter the same problem with the packages cdtool, workbone, orpheus, ...
If I use the kernel 2.6.30-bpo.1-amd64 cdcd works like a charm.
why "cdcd" does not work with the kernel 2.6.32-4-amd64 ?
Is there a way to make it work with the kernel 2.6.32-4-amd64 ?
My sound card works fine because sound-juicer and vlc read my CD correctly
View 4 Replies
View Related
Apr 30, 2011
Just updated to kernel 2.6.37.6-0.5 from:[url]
No error. then rebooted and grub gives following error:
Press Any Key to Continue
this goes to grub boot menu where I then select my old kernel 2.6.37.1-1.2-desktop and it boots OK.
Question: Should root(hd2,2) be (hd0,2) like the working kernel?
My menu.lst is:
sda and sdb are not used at this time, sdb will have 12.1 Ms soon. The two windows drives are used by virtualvox for WIN XP backup. Not used often.
View 7 Replies
View Related
Jul 8, 2010
I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
View 9 Replies
View Related
Nov 28, 2010
I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies
View Related
Mar 25, 2011
I installed Debian Squeeze on a laptop today, with the official i386 DVD1. At the end, I was very disappointed to notice the installer automatically chose the amd64 kernel (with i386 packages ? how does that work ?). The hardware is compatible, but I'd really like to use the i386 kernel instead. Earlier, you could choose the kernel during installation ; I looked in Expert install with no luck. Where is it ?
View 4 Replies
View Related
Aug 17, 2011
I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.
My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg
over
CONCURRENCY_LEVEL=4 make-kpkg --initrd --revision=123x kernel_image?
Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!
View 1 Replies
View Related
Feb 7, 2010
I got a LG notebook R580, and there is no sound at Debian with Kernel 2.6.26-2-amd64, driver snd-hda-intel[URL]
View 5 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
May 27, 2011
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
View 14 Replies
View Related
Aug 30, 2011
I just updated my Squeeze install now the current kernel version is now 3.0.0-1-686-pae. I now no longer have any internet connection.I have tried the failsafe boots with no luck. I have tried the 2.6 kernels and have had no luck.I have tried to manually start the connections with no luck.I have booted off of a Squeeze Live CD and the connection works just fine.
View 4 Replies
View Related
May 3, 2015
I just have installed a fresh copy of Debian 8. However I cannot boot it. Thus the boot procedure start as below and for some reason it stops.
Loading, please wait...
fsck from util-linux 2.25.2
/dev/sda/: clean, 151066/30040064 file, 3893607/120130816 blocks
View 9 Replies
View Related
Jun 21, 2015
After the latest update of Debian Wheezy, about three days ago, one of my machines won't boot anymore. The update was done by:
Code: Select all/usr/sbin/update-smart-drivedb
apt-get update
apt-get -y upgrade
apt-get -y autoremove
I get the error message: "Alert! /dev/disk/by-uuid/71c... does not exist. Dropping to a shell!"
The dir /dev/disk contains only "by-id" and "by-path".
I booted with the rescue system, dropped into a shell and recreated the ramdisk with
Code: Select alldpkg-reconfigure linux-image-3.2.0-4-amd64
dpkg-reconfigure grub-pc
But without success. On another machine the update went flawlessly.
View 7 Replies
View Related
Jul 21, 2011
Recently upgraded to 8GB RAM. BIOS shows 8GB, lshw shows 8GB (2 x4GB), Applications > System Tools > System Monitor > System shows 3.7GB. After 2 days of forum hunting I cannot find a way to check whether the machine is using all 8GB and, if not, how to make it do so. I have found a few postings about using the "bigmem" build but these seem to be for the 32-bit builds as well as a few postings saying that the amd64 build uses bigmem/highmem by default. I can't find any reference to CONFIG_HIGHMEM in /boot/config-2.6.32-5-amd64 and I don't have a menu.lst in /boot/grub to change to a "bigmem" type build.
View 12 Replies
View Related
Sep 1, 2010
I have a dual boot computer. I seem to be having a bit of a problem with Grub lately. Every time I do any kind of update in Debian Lenny AMD 64 it borks my Grub. The first time I had to change a few lines in menu.lst (hd1,1 to hd0,1), no problem. The second time, things went downhill fast and G-Parted was giving me errors on my NTFS partitions. I had to do an XP repair, fixboot, and I had to reinstall Grub completely to the MBR.
Now, I having a "Grub Loading stage1.5. Grub loading, please wait.... Error 22". All I did was update Debian Linux and shut down. From my initial searches this is an error relating to not finding the correct partition. I have booted with a G-Part CD and it shows all my partitions. I do have a Windows XP Home boot cd if I need it. Here is my partition outline if you need it:
/dev/sda1 NTFS (Windows) flags--boot
/dev/sda2 Ext3 (Linux)
/dev/sda3 FAT32 (shared space between Windows and Linux)
/dev/sda4 extended
/dev/sda5 linux-swap
View 6 Replies
View Related
Jul 31, 2011
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
View 2 Replies
View Related
Oct 4, 2010
I am trying to install debian on my windows PC but am receiving some errors with it. I have downloaded "debian-506-amd64-DVD-1.iso" from debian website and am seeing that the md5 sum is correct. I am getting following error when I choose Graphical Install or install.
[ 1.480788] crc error
[ 1.569788] kernel panic -not syncing:VFS: Unable to mount root fs on unknown block(253, 52)
Description of my PC: I have 2 hard disks
1. IDE hard disk (80 GB) -> windows is on this drive
2. SATA hard disk(250GB) -> I intend to install debian on this drive.
3. MSI motherboard & AMD 64 processor with 1 GB RAM.
4. NVidia external graphics card based on AGP slot(256 MB)
EDIT:: This time I got one more error message prior to the 2 shown above [some number] PCI:Cannot allocate resource region 0 of device 0000:00:00.0
View 6 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Apr 30, 2011
I was wondering if the AMD64 bit release of ubuntu is just a recompiled kernel with amd64 optimizations or if it is ALL 64 bit? I understand that an amd64 kernel doesnt have to come with a 64 bit system.
View 1 Replies
View Related
Sep 21, 2010
The following is a subset of error messages I'm getting when trying to do "apt-get upgrade" or "apt-get dist-upgrade" on a machine running ubuntu server 9.10 amd64:
Code:
Preparing to replace linux-image-2.6.31-22-server 2.6.31-22.60 (using .../linux-image-2.6.31-22-server_2.6.31-22.65_amd64.deb) ...
[code]....
View 2 Replies
View Related
Feb 8, 2011
Ubuntu 10.10 on both PC's.
One is updated to kernel 2.6.35.25, but the other one does not give me any updates for kernels..so it still has 2.6.35.24. I don't understand this.
View 9 Replies
View Related
May 20, 2010
This thread describes how to build a 2.6.34 kernel with load-balancing to cut down the number of load balancing wakeups. Running powertop on my amd64 PC shows that this kernel cuts down the number of wakeups by around 30%.
1. Open a gnome-terminal and get root privileges:
Code:
sudo -s
2. Install required packages for building the kernel:
Code:
apt-get install build-essential bin86 kernel-package libqt3-headers libqt3-mt-dev wget libncurses5 libncurses5-dev
3. Download the 2.6.34 kernel source file:
Code:
cd /usr/src
wget http://www.kernel.org/pub/linux/kern...2.6.34.tar.bz2
4a. Download the diff file for the patch from [URL] and save as (eg) patch-load-balancing.diff. Move it to /usr/src once you have downloaded it.
5. Untar the source file:
Code:
cd /usr/src
tar xjf linux-2.6.34.tar.bz2
6. Link /usr/src/linux to the resulting folder:
Code:
cd /usr/src
# the folder linux may exist as a symlink from previously; if so, remove it
if [ -e linux ]; then rm linux; fi
ln -s linux-2.6.34 linux
[code]....
View 5 Replies
View Related
Jun 16, 2010
I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
View 8 Replies
View Related
May 2, 2015
After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.
3.16.0-4-amd64
3.16-3-amd64
- How do I know which one is the newest and if happy with it, how to remove the older one?
View 9 Replies
View Related
Jan 21, 2009
I had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
View 3 Replies
View Related
Feb 8, 2010
I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
View 14 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
