I have grub dual boot. I upgraded from ubuntu 9.04 to 10.04 today, there was some questions about grub, and I marked all of the /dev. But now I cannot boot my windows partition.Windows XP is on the grub boot menu, but if I click on it, a black screen show up, and only a blinking cursor.When i boot ubuntu, I can read the ntfs partition.What do I have to do, to get windows xp to boot again?
View 5 RepliesWanted to try Ubuntu for the first time i used a wubi install and i made sure i had duel boot when i selected for the installment because id like to play some games every once in a while well i got some updates from Ubuntu today and after i installed them when i restarted my computer i noticed that windows 7 wasn't there to choose.
I have 10.10 installed idk if this will help but here # RESULTS.txt
I updated Grub2 and now I cannot boot my Vista or Windows 7. I am running Ubuntu 10.04. I updated because Grub2 was not updating to the newer kernels that were being installed. Now the new kernel is showing in the boot menu, boots fine into Ubuntu, but my Windows installs won't boot. Current installed version is grub-install (GNU GRUB 1.98-1ubuntu6).
View 4 Replies View RelatedI have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies View Relatedi updated tis morning to 10.04 on a compaq netbook and only problem is that the system minimizes all windows.... Can't kee a window on top for more than 2 secs. It seems that all is ok,any program i klick runs but it immediatly minimizes and won't stay open. I cant do anything,i have to type one character at a time.
View 4 Replies View RelatedI've got a dual boot system with both Vista and Ubuntu. After upgrading to 10.04 my Vista doesn't load anymore. I select it in the Grub menu and the computer just hangs.
Are there any known fixes for this? Where do I start? I'm an Ubuntu novice, but I'm an able computer fixer.
I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies View RelatedHey, yesterday I decided to update from 10.10 to 11.04.
I was using Windows Vista in dual-boot with Ubuntu but after updating Ubuntu to 11.04 I lost my dual-boot menu. It worked without problems before update. Now it starts automatically to Ubuntu log in screen.
I've tried so far:
1. Updating GRUB via terminal
2. Looked at my menu entries
Code:
grep menuentry /boot/grub/grub.cfg
menuentry 'Ubuntu, Linux-ydin 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
[Code]....
Hey everyone I'm pretty new to ubuntu/linux so please bear with me . I recently installed 10.10 on my new htpc. The initial install went great, until I went to install the updated driver for my graphics card. What I did was I downloaded the driver off of nvidia. Then I did these steps:
1. ctrl-alt-f1
2. logged in
3. sudo services gdm stop
4. I then located the driver package that I downloaded and ran it, it seemed to install fine (except for an error about some install script? but it let me proceed)
5. sudo services gdm start
It went to the gdm/ubuntu desktop. However I then connected it via HDMI, and the resolution was way off (top bar was not even displayed on TV) and I tried many different settings but no luck in fixing it. Next after restarting it did not automatically boot to the gdm/desktop. Instead it stayed at the command line login (the ctrl-alt-f1 screen).
tl;dr : 1. How to make it automatically boot to the gdm/desktop after I updated my gpu driver
2. How to fix the resolution for HDMI from my gpu to my TV. (DVI works fine
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View Relatedi have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
Very new to Ubuntu, but I was able to upgrade from 9.04 to 9.10 with no problems. New to forum and couldnt find any help in other posts. Like everyone, I was itching to try the newest and greatest. Tried updating last week but had the "openoffice..." bug and wouldn't install. Tried last night and everything went fine, until I restarted the system. Now it won't complete the boot. It show the GRUB, and some other startups, but them blank screen. 10 min later nothing. Tried it 3 more times. I think I am stuck, right? New install?This is what I am thinking of doing- 1. boot from old cd to get my files out. 2. fresh install of 9.10 and be patient for the offical release. Is there anything else I could do?
View 8 Replies View RelatedI updated to Ubuntu 10.04. I had a nice dual boot system going with Ubuntu and Windows Vista. After the update I can't boot Vista anymore - and I really need itI don't know much about Grub, but I know enough about computers to edit config files etc.What settings should I punch into grub.cfg to get Vista to boot properly?
View 9 Replies View RelatedI have been using Ubuntu Netbook remix for a while and have been pretty happy with it. Over the weekend, the software did a typical update, and the next time I started the computer it goes straight to the GRUB command line. On the same day, I installed ATanks, so I am not sure which caused the problem, but I really don't see the game causing a problem with the boot loader.Installed through Wubi.v. 9.10Dual boot w/Windows; no problems booting until now.I do not know which updates were installed and cannot boot into Ubuntu to find out.At the GRUB command prompt, I tried to boot, but it did not load anything other than vmlinuz; when i searched to make sure I entered the correct partition (/dev/hda2), I noticed that, well, there were no partitions in /dev
View 2 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedProblem occurred after attempting to update firefox and configure evolution. Attempted to update firefox last night, it froze, attempted to open the system monitor to end the unresponsive process, and got a message saying the system was unable to support a new process because it couldn't fork. Did a forced reset, and the following now happens upon starting up. After selecting ubuntu (as it's a dual boot system with Windows XP) at the grub loader, blank screen, to this:
Code:
mount: mounting dev/disk/by-uuid/5b24d4b5-9b8d-4608-9387-0d92756dcdd8 on root
failed: invalid argument
mount: mounting /dev on /root/dev failed: no such file or directory
[code]....
It will not run recovery mode, and I have no bloody what it means by init=bootarg.
EDIT: Nevermind- I'm going to try the methods listed in [URL], and hope the gods of fsck smile upon my lowly hard drive.
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
After quite a bit of troubleshooting, I have only made my problems dual booting XP and Xubuntu go from bad to worse.
I installed xubuntu on my Windows XP laptop as a dual boot system. (Single 40gb Hard Disk, used xubuntu wizard to repartition XP)
After installation, Windows XP would not boot from the boot menu; it would just go to a blank screen with a blinking cursor in the upper left corner (xubuntu was fine).
So far, I have repair installed (not clean) Windows XP and used the Windows XP recovery console commands "fixboot" and "fixmbr" (fixmbr caused xubuntu to become unbootable with no boot menu) to no avail.
I have 2 HDDs:
HDD 1 (sda) with Windows XP installed on sda1 and four more partions.
HDD 2 (sdb) with three NTFS-Partitions (sdb1, 5 and 6) and Ubuntu 10.04 (sdb7) + Swap-Partition (sdb8).
I would like to boot Ubuntu using the Windows XP boot loader, i.e., having an entry there to choose Ubuntu and start my installation of Ubuntu 10.04. I have installed Ubuntu 10.04 on sdb7 and told the installer to install the grub2 boot loader to /dev/sdb (should it have been /dev/sdb7?). When using the boot selection option of my bios and choosing the second HDD Ubuntu starts without problems.
I used dd if=/dev/sdb of=bootsect.lnx bs=512 count=1 to copy the mbr of my second HDD and copied the file bootsect.lnx to my c: drive. Then added C:ootsect.lnk = "Ubuntu Linux" to my Windows boot.ini. When rebooting my computer I get the option "Ubuntu Linux" in the XP boot loader. Choosing it I come to a black screen with a blinking white cursor. All I want to do is not use Grub 2 as my primary boot loader but instead leave my WinXP installation untouched and start Ubuntu from within WinXP boot loader. This has been working just fine with my old Ubuntu installation.
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.