Red Hat / Fedora :: Updated Kernel But Still Boots The Old?
Jun 16, 2010I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
ADVERTISEMENT
Fedora Installation :: Exclude The Kernel And Initrd From Being Updated?
Jan 21, 2009I had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
Fedora :: Get The Updated Kernel Properly Listed And Ready To Use?
Feb 8, 2010I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
View 14 Replies View RelatedFedora :: Updated Kernel Doesn't Appear On Grub Menu?
Aug 12, 2010Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
Fedora X86/64bit :: Booting Updated 2.6.39.1 X86_64 Kernel
Jul 19, 2011In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
Fedora :: F11 Boots To Wallpaper But No Gnome After 2.6.30.5-43 Kernel Update
Sep 8, 2009Applied several updates last night including a 2.6.30.5-43 kernel and a suggest kmod-nvidia but the 5-43 kernel boots to a wallpaper gnome screen the first time.
Booted to the "fallback" 2.6.29....17 kernel and it worked fine.
Then 2.6.30.5.-43 also booted but without nvidia.
Installing akmod-nvidia as sugggested in other posts. Also see a kmod for this kernel.
Fedora :: Updated Kernel / Now Nvidia.ko Module Doesn't Load
Feb 26, 2010I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies View RelatedFedora Hardware :: Wacom Drivers And Kernel Updated - Tablet Hanging
Nov 30, 2009I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
Fedora :: Reinstall Nvidea And Broadcom Drivers Every Time The Kernel Is Updated?
Dec 9, 2010Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies View RelatedFedora :: Updated Kernel And Fedora Won't Start
Dec 23, 2010Yesterday fedora automatically updated the linux kernel, and now it wont start entirely up. After the fedora logo has finished loading up the white, and it has turned into the real logo, nothing happens.However, i can boot into fedora with the old kernel via grub, so i guess it is related to the kernel update.
View 14 Replies View RelatedFedora Security :: Modifying Grub Kernel Arguments Boots Directly Into Root?
Jan 21, 2011I updated the kernel to 2.6.35.10-74.fc14.x86_64 and had to reinstall and rebuild the kernel module for my ATi driver as usual, so I edited the kernel arguments at the grub splash screen so that I could boot into single user mode and install the driver (i.e appending the relevant line with '1'). The interesting thing is, the system booted directly into single user mode as root when the system started up. No password was required.
View 6 Replies View RelatedFedora :: Cold Boots Often Take Up To 10 Attempts Before The Computer Successfully Boots?
Oct 29, 2010my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
Ubuntu :: Kernel Updated In One PC But Not In The Other?
Feb 8, 2011Ubuntu 10.10 on both PC's.
One is updated to kernel 2.6.35.25, but the other one does not give me any updates for kernels..so it still has 2.6.35.24. I don't understand this.
Ubuntu :: Get The Boot Log Before The Kernel Boots?
Aug 12, 2010I'm trying to boot the kernel with additional gz file.
Code:
title tboot w/ Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
uuid e7afd04f-1548-48e9-941b-49988cc40a5f
kernel /boot/tboot.gz logging=serial,vga,memory
[code]....
However, when I boot with this, tboot.gz seems to have an error that makes the computer to restart. So I want to see the log of booting tboot.gz. This is before ubuntu is booted.get the log of this tboot.gz boot?
Debian :: Kernel Updated To 2.6.32-bpo.3-amd64 But Won't Boot?
Jul 15, 2010I have not been using my lenny 2.6.26-2-amd64 for about a month or more.I booted it today, and there were over 30 updates available, inculding some kernel header updates I installed all these updates and rebooted.Well, there are 2 new entries to grub menu:Linux 2.6.32-bpo-3-amd64Linux 2.6.32-bpo-2-amd64 (single user or recovery)in addition to my old kernels.So, I chose the bpo-3 entry, but it just sits there.I have to chose the kernel before the update. Is there something wrong with the update? dit: I just found out that synaptic manager does not show 2.6.32-bpo-3-amd64 at all as being installed.In fact, it is not in the header list nor the image list.
View 5 Replies View RelatedOpenSUSE Install :: Updated Kernel Will Not Boot - 2.6.37.6
Apr 30, 2011Just updated to kernel 2.6.37.6-0.5 from:[url]
No error. then rebooted and grub gives following error:
Press Any Key to Continue
this goes to grub boot menu where I then select my old kernel 2.6.37.1-1.2-desktop and it boots OK.
Question: Should root(hd2,2) be (hd0,2) like the working kernel?
My menu.lst is:
sda and sdb are not used at this time, sdb will have 12.1 Ms soon. The two windows drives are used by virtualvox for WIN XP backup. Not used often.
Ubuntu Installation :: Cannot Boot Into Updated Kernel ?
Jul 8, 2010I recently updated the kernel of lucid from 2.6.32-22 to the ""-23 release through update manager. Now whenever i try to boot the new kernel from GRUB the screen goes black and the computer stops responding with the caps lock and scroll lock lights flashing on the keyboard.
I can still boot into ""-22 fine and keep using ubuntu.
My first thought that the problem was the newer kernel itself so I tried to update to 2.6.33-5 from [url]but the same boot problem exists within this one also.
Because it goes straight into the black screen after GRUB I have no way of telling what has happened without error messages. Would this appear in any log files and if so which ones?
Ubuntu Installation :: Updated Kernel Will Not Boot ?
Nov 28, 2010I recently upgraded Linux kernel headers for version 2.6.35 on x86/x86_64 from 2.6.35-22 to 2.6.35-23. and my system will not reboot to the upgraded kernel. To reboot I have to force shutdown my Toshiba L-450 laptop and the restart. This brings me to the GRUB screen were I can choose to use the previous 2.6.35-22. Normally do not see the GRUB screen as I am only running Ubuntu 10.10 64 bit on this computer. I have tried reinstalling linux-headers-2.6.35-23 and linux-headers-2.6.35-23-generic and got the same result.
View 4 Replies View RelatedUbuntu Installation :: 10.10 Always Boots Kernel 2.6.32.24-generic?
Jan 9, 2011I just noticed I'm not running with the latest kernel.
This box was originally installed as Ubuntu 10.04, then upgraded to 10.10.
I just recently noticed that, even though kernel 2.6.35-24-generic is installed, this box seems to insist on booting up with 2.6.32-24-generic.
Looking at /boot/menu.lst, it looks ok. (default is 0, and first kernel in list is 2.6.35-24. 2.5.32-24 is the *last* one in the list!)
Debian Configuration :: Updated To Kernel 3.0 And Ethernet Disappeared?
Aug 30, 2011I just updated my Squeeze install now the current kernel version is now 3.0.0-1-686-pae. I now no longer have any internet connection.I have tried the failsafe boots with no luck. I have tried the 2.6 kernels and have had no luck.I have tried to manually start the connections with no luck.I have booted off of a Squeeze Live CD and the connection works just fine.
View 4 Replies View RelatedUbuntu Installation :: Updated And Grub - Load Kernel First
Mar 25, 2010So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies View RelatedUbuntu Installation :: 10.04 LTS Failed To Start After Last Kernel Updated
Apr 20, 2011I'm using 10.04 LTS and updated to the last kernel. After reboot the system is hanged to the grub>
I tried to reinstall grub with the 10.04 live CD but the same thing append after reboot!
The only thing I can think of is that the machine is a RAID 1 system! What can I do to restart it normally?
OpenSUSE Install :: System Boots To Grub Instead Of Kernel?
Apr 14, 2010I installed Fedora 13 on a separate partition and it deleted all of my openSUSE entries in grub. Or the boot menu, whichever is correct. From another thread, I found these commands and tried it:
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
hd0,3 contained one of my openSUSE installs. Everything went well and grub accepted all of these commands except quit. So I used esc and rebooted. The reboot brought up the grub shell again. I could find no way to boot anything. Then I used the 'repair installation' option from the 11.2 dvd and installed a new boot loader for /dev/sda2 which contains 11.2.
This was successful, so I went to the YaST bootloader tool and added /dev/sda3 (Milestone 5) and /dev/sda4 (Fedora) and rebooted. But these two partitions still boot into grub instead of loading the correct kernel.
Ubuntu :: Crash In Kernel During Boot (but System Boots)?
Apr 27, 2010I have a custom compiled kernel which seems to work OK. However, during boot, I get:
Apr 27 21:16:14 poni kernel: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:90:2d:6c
Apr 27 21:16:14 poni kernel: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet)
[code]....
System continues to boot OK and everything seems to work fine as I expect. I am not sure what the above causes. It looks related to USB, but I am not sure. lsusb gives:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
OpenSUSE Install :: Updated To New Kernel Now System Hangs At Boot?
Feb 5, 2010I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
Slackware :: Should Glibc Be Updated In Current Every Time There Is Kernel Update?
Feb 10, 2010I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
CentOS 5 Server :: Updated Fresh 5.3 Xen Kernel And PAE Support Disappeared?
Aug 26, 2009I have installed CentOS 5.3 with Xen on a PowerEdge 2650 machine with 6GB of RAM. As usual, PAE was already enabled so I did not have any problem with utilising all of the memory. However after upgrading to the latest release of the kernel (2.6.18-128.7.1.el5xen), memory available decreased to 4GBs. Then I switched back to the old kernel and 6GB was there. Then finally have switched back to the new kernel and 6GB is again there. So now PAE seems to be enabled but what concerns me is the inconsistent behaviour. (Also I am not sure the reason was the upgraded kernel.)
View 2 Replies View RelatedUbuntu Networking :: RTL8187L Updated Driver For Kernel 2.6.32/2.6.31 For ALFA AWUS036H
Jan 5, 2010i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.
To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........
Ubuntu / Apple :: Updated Kernel For Sound On Imac Now Nvidia Driver Fails
Apr 17, 2010I just updated to 2.6.33 kernel and I am using an Intel Mac with ubuntu 9.10 running native. I upgraded because the new kernel has sound working for the imac (at least through headphones). Once the kernel was updated to 2.6.33 the proprietary NVIDIA graphics driver which I had activated through systems -> administration -> hardware drivers is now inactive and will not work. systems -> administration -> hardware drivers says to look in /var/log/jockey.log, here is the last part of that file [URL]. PLEASE HELP OUT. I hate using the Mac os on the other partition.
View 2 Replies View RelatedGeneral :: CentOS - Safe To Remove The First Kernel In The Installed List To Save Having Two Kernels Being Updated Everytime?
May 8, 2011When I run yum list installed command the output shows two kernels:
[Code].....
Would it therefore be safe to remove the first kernel in the installed list to save having two kernels being updated everytime I run yum update? Or is the PAE kernel dependant upon the original?