The only connection to internet I have is via usb adaptor sitecom WL-352, under windows XP. Now I installed Ubuntu 10.10, and I cannot connect to internet via wireless. How can I do to use this adaptor?
View 4 RepliesI am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
I'm running ubuntu 10.04 with the sitecom wl-344 USB wireless networking dongle. I read that the device should work with the rt2800usb driver however I get this error in the terminal:
Code:
michael@michael-desktop:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 046d:c71c Logitech, Inc.
[Code]...
I've just installed Ubuntu (Koala) on an old (but worthy) Toshiba laptop. It's got a Sitecom WL-140 wireless card. (BTW I'm new to Ubuntu, but an old hand at Solaris). Can't get the card to work, although I think It's nearly there. nm-tool shows driver is p54pci. The activity light shows an orange light occasionally. State is disconnected. I'm not really sure whether I should be using the supplied driver (p54pci) or the Windows driver for this card and ndiswrapper. I've installed the Windows driver with ndiswrapper thinking this may fix it but no.
ndiswrapper -l says wlancig: driver installed and device (1260:3886) present.
I am new to ubuntu, installed 10.10 on dell 250n. I am trying to use a Sitecom WL-011v2 wireless PC card.
View 3 Replies View RelatedI bought myself a Sitecom Wireless Network USB Micro Adapter 300N X3 (Sitecom WL-364) today. When I place the adapter in my PC, it is not recognised as a wireless adapter.
There are similar posts like this one, most of them are about conflicting drivers. According to this post I shouldn't be worried about that (as I'm working in 11.04 32-bit).
The output of lsusb is this:
Code:
Bus 001 Device 003: ID 0df6:0051 Sitecom Europe B.V.
Also, I was having a hard time getting to know the chipset of the adapter. Is RT2870 the right driver for the adapter?
you can add this device to rt3070sta...ID 0df6:0040 Sitecom Europe B.V. Full work with 3070sta and the old original kernel but don't work with the kernel head and NICOK sta driver
View 5 Replies View Relatedhow to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I have a older Dell desktop running a older version of Ubuntu 9.04. I recently got a Belkin N300 micro wireless usb adaptor so I could use it to connect to the internet. I have a Verizon MiFi 2200 wireless router that I use for internet access. The desktop won't recognize the new hardware. It came with a driver disc, but it's for windows.
Will this adapter even work with linux?
If so, how do I get it to work?
I set up an older computer with Ubuntu 9.10 and tried to get my Linksys AE1000 Wireless N adapter to work. My first mistake was not checking in advance to see if this adapter would work, but I have taken the leap and I am intent on making it work. I ran lsusb and it gives me a device number (13b1:002f) so I know it can be seen and I have also installed indisgtk the GUI for Wirless drivers. I have tried some suggestions from other posts to no avail.
View 9 Replies View RelatedI just recently moved somewhere and the internet is wirelessly provided by the whole condo building. It is just a free and open network but I am trying to find a way to hook up my Xbox 360 to the internet. I do not have a wireless adaptor or a spare router, what I do have is my ubuntu laptop. Is there a way I can hook my xbox up to my laptop and bridge the connections so that I can finally connect to xbox live via my laptop?
View 2 Replies View RelatedI have a usb wireless adaptor that I sometimes need to remove from the computer, but often it locks up my system upon removal, even after typing "ifconfig rausb0 down" Is there a Linux equivalent to the windows "safely remove hardware" applet for usb devices?
View 1 Replies View RelatedI just recently installed and have no clue how to get the drivers for my netopia 3d wireless adaptor to work! all the drivers are for windows! I have never used this OS before.
View 5 Replies View RelatedI've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.
View 5 Replies View RelatedI have been given an Edimax EW7318USG wireless adaptor,no drivers.I download 2008_0506
_RT73_Linux_STA_Drv1.1.0.1.tar.zip from [URL]..onto my Linux computer using an adaptor from another computer.but cannot find out what to do next:. I have just installed Fedora 11 from a Linux Format magazine DVD.
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
I have configured my PC to run a linux 2.6 kernel in VMware and have no problem loading the image and using the wired network adaptor and the basic functions. I am having trouble finding the wireless network however. My Box has an " Intel(R) Centrino(R) Advanced-N 6250 AGN " wireless network adaptor. From what I can tell, this is supported by this version of linux. I have the adaptor enabled, my image settings as bridged, and the wimax enabled in the removable devices (connected). When I run WiCD manager I get the error message " Could not connect to wicd's D-Bus interface "
View 1 Replies View RelatedI installed CentOS 5.4 on my desktop yesterday after facing crashes from Ubuntu 9.04 Everything worked fine and few didn't which I could resolve, but this problem is absolutely strange to me. I've USB wireless adaptor Belkin F5D7050 v4000 which uses a zydas zd1211 chipset. The problem is that I've not been able to connect to internet or even in the local network. (I've this another Laptop (Windows Vista) which can connect to internet and thus I can post and download stuff.)
I read the CentOS wiki [URL] to setup the wireless network and it asked me to download a firmware for it.. I downloaded and installed the firmware from the specified location but to no respite and I can't connect to network. now the strange thing is the result of iwconfig which was here even before installing the firmware. iwconfig shows
[Code]....
I wants to ask if there is any method to configure bcm4313 wireless adaptor to monitor mode.
I need to do this for my graduate project
till this moment, what I'm sure of is that ndiswrapper doesn't support monitor mode.
Is there any way to use monitor mode on this adaptor?
very new to using fedora and trying to install my belkin wireless adaptor is not working at all. It reads the disk but says there is an error.it still works fine on windows so i'm not sure how to fix this.
View 1 Replies View Relatedive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
Decided to have a bit of a clean, and moved the computers out the way (unplugged and stuff) to hoover up and that around the floor, but not the inside of the computers.
Now ive put everything back together, my main pc with linux on doesn't detect the wireless card.
I turned it off, then checked the card hadnt been knocked out. It did appear to be, so i put it back in properly, and it still wont detect the card. (its basically a pcie card with an antenna sticking out the back).
Not detecting wireless network
View 1 Replies View RelatedI'm dual booting BT4 and Ubuntu 9.10. My question is, rather than me having two separate partitions for this, could I just put BT4 in VMware and still be able to detect wireless networks from it? Just out of curiosity, does VMware machines have the capability of detecting wireless networks just like the host OS?
View 4 Replies View RelatedI installed ubuntu 10.10 and it is not automatically detecting the wireless connection and showing message firmware missing. how to connect to wireless. I installed on the laptop.
View 6 Replies View RelatedFirst time ever switching from windows. Mainly doing this cause I though it would be fun to learn a new OS and see how it is.From watching a few videos it looked like all I have to do is click on the wifi logo at the top of the screen and I would get my router and a bunch of others (does this on windows) but when I click on it I dont get anything. I think it might be that im running this on a laptop. My wifi card is: Standard Dell Wireless 1501 802.11 g/nIts a new dell inspiron 5000 laptop i customized a little with more ram and a new video card.
Im guessing I will need to provide more info but as I said at the start Im new to this and not sure how or what info I would need to provide. Please just tell me how I can get any data you need and il get right on it. (I used Wubi to install this, went off without a hitch)
I'm having a new problem with my wireless. It's detecting the network, but it won't connect. My Verizon card says it's WEP, but the WICD has three WEP options and none of them connect. What troubleshooting can I do?
View 2 Replies View Relatedim dual-booting Ubuntu on my computer with windows 7. When I use windows the internet works fine, however when i switch over to Ubuntu and click on network manager no wireless networks appear.
View 5 Replies View RelatedEven thought my Westel Model 7500 has the appropriate green lines (Power, Wireless, DSL, Internet), it always takes my Ubuntu 9.04, Dell Inspiron 1545n considerable effort to connect to the wireless network. Please note that I am using WPA security and MAC filtering.Below is the series of events, spanning about 10 minutes every time I boot up the laptop.1. Tries to connect wirelessly automatically.2. Pop-up appears with SSID and password in dots.3. Tries to connect wirelessly4. Pp-up appears with SSID and password in dots.5. Tries to connect wirelessly6. Pop-up appears with SSID and password in dots.7.Tries to connect wirelessly then says "[SSID Name] now disconnected"At this point I manually connect to wireless and after 45 seconds it says "[SSID Name] now connected"
View 5 Replies View RelatedIt is detecting the wireless networks in the surrounding area but it isn't connecting.
View 11 Replies View Related